The grating-based magneto-optical trap (GMOT) is a promising approach for miniaturizing cold-atom systems. However, the power consumption of a GMOT system dominates its feasibility in practical applications. In this study, we demonstrated a GMOT system based on planar elements that can operate with low power consumption. A high-diffraction-efficiency grating chip was used to cool atoms with a single incident beam. A planar coil chip was designed and fabricated with a low power consumption nested architecture. The grating and coil chips were adapted to a passive pump vacuum chamber, and up to 10 6 87 Rb atoms were trapped. These elements effectively reduce the power consumption of the GMOT and have great potential for applications in practical cold-atom-based devices.
The grating-based magneto-optical trap (GMOT) is a promising approach for miniaturizing cold-atom systems. However, the power consumption of a GMOT system dominates its feasibility in practical applications. In this study, we demonstrated a GMOT system based on planar elements that can operate with low power consumption. A high-diffraction-efficiency grating chip was used to cool atoms with a single incident beam. A planar coil chip was designed and fabricated with a low power consumption nested architecture. The grating and coil chips were adapted to a passive pump vacuum chamber, and up to 10 6 87 Rb atoms were trapped. These elements effectively reduce the power consumption of the GMOT and have great potential for applications in practical cold-atom-based devices.
Compared with the conventional three-dimensional magneto-optical trap (3D MOT), the grating magneto-optical trap (GMOT) enables the cooling and trapping of atoms with only a single beam of light, thereby significantly reducing the overall volume of the device. Here, a grating chip with high diffraction efficiency is designed, and its parameters are optimized through simulations, which effectively suppresses the power of the zero-order diffracted light. Subsequently, the grating chip is fabricated and characterized, and using this chip, we successfully trap 1.7×106 atoms. The temperatures of the atomic cloud in the axial and radial directions are 5.6 mK and 17.0 mK, respectively. The successful implementation of the atom cooling and trapping experiment based on the diffraction grating provides important reference for the miniaturization of cold atom-based quantum sensors.
Abstract We present a compact cold atom platform where an optical grating chip and planar coil chip are placed inside a compact vacuum chamber to create a magneto-optical trap. This approach significantly reduces the system volume to about 20 × 20 × 20 cm3 compared to conventional vacuum systems and offers greater flexibility in accessing the trapped atoms. We demonstrate the trapping of 3 × 105 cold rubidium atoms at a temperature of 100 μK in a vacuum pressure below 10−7 mbar. The simplified optical geometry, low power consumption, and high degree of integration make this a promising platform for portable and versatile cold-atom devices in quantum sensing, timing, and information processing.
Cold atoms produced in magneto-optical traps (MOTs) have underpinned advances in emerging quantum technologies, including quantum computing, precision metrology, and fundamental physics. Grating-based MOT (gMOT), which employs a reflective diffraction grating to enable laser cooling from a single incident beam, offers a compact alternative to conventional six-beam MOTs. However, the inherent asymmetry of gMOT beam geometry can compromise the trapping stability and efficiency, particularly for atomic species with complex internal level structures. Here, we present a geometric-phase dielectric metasurface that simultaneously engineers the transmitted and diffracted wavefronts with desired polarization states, enabling full MOT operation under axial illumination using a single planar optical element. This metasurface-based architecture restores the symmetry in the trapping forces while preserving the compactness and simplicity of gMOTs. Using this approach, we demonstrate the trapping and cooling of cesium─an atomic species widely regarded as challenging for standard gMOT implementations─and analyze the trapping mechanism through numerical calculations. By providing independent control over key trapping parameters within a planar and alignment-simplified platform, this work establishes a route toward compact, robust, and species-flexible cold-atom systems, thereby expanding the applicability of miniaturized MOTs for integrated quantum technologies.
Integrated diffraction gratings offer a compact route to magneto-optical traps (MOTs) for atom cooling and trapping, thus preparing MOTs for future scalable quantum systems. Although segmented tri-gratings ensure axial radiation pressure balance, they are limited in optical trapping volume. Planar 2D gratings, though offer larger trapping regions, suffer from low diffraction efficiency and the resulting axial pressure imbalance, necessitating the use of a neutral density (ND) filter to achieve this balance. We present a numerically optimized 2D diffraction grating design that overcomes these limitations and satisfies the required optical conditions for laser cooling, namely, radiation pressure balance, specular reflection cancellation, and circular polarization handedness reversal upon diffraction, thus achieving an optical molasses—a necessary condition in MOT. Using rigorous coupled-wave analysis and a genetic algorithm, we design a grating for Rb87 grating MOT (GMOT) that achieves a 24% first-order diffraction efficiency, of which 99.7% have the correct circular handedness. These properties enable efficient atom cooling without an ND filter when used with a flat-top beam inside the vacuum chamber. Our design simplifies optical alignment, reduces system footprint, and advances the integration of GMOTs into compact quantum devices.
The magneto-optical trap (MOT) is an essential tool for collecting and preparing cold atoms with a wide range of applications. We demonstrate a planar-integrated MOT by combining an optical grating chip with a magnetic coil chip. The flat grating chip simplifies the conventional six-beam configuration down to a single laser beam, and the flat coil chip replaces the conventional anti-Helmholtz coils of cylindrical geometry. Up to 106 cold 87Rb atoms are trapped by the planar-integrated MOT, with the atom cloud being approximately 6mm above the chip surface. This configuration effectively reduces the volume, weight, and complexity of the MOT, bringing benefits to applications including gravimeter, clock, and quantum memory devices.
We have made magneto-optical traps (MOTs) on a chip which is able to cool and trap ~108atoms directly from a ~1cm3thermal background of87Rb. Diffraction gratings are used to manipulate the light from a single input beam to create the beams required for a MOT [1,2]. The gratings are etched into the surface of a silicon or GaAs wafer by either electron beam, or photo-lithography making them simple to fabricate and integrate into other atom chip architectures. We have developed a variety of gratings for utilisation both inside and outside a vacuum chamber - facilitating their incorporation into both new and existing devices. Unlike previously integrated cold atom sources on a chip [3,4] the atoms now sit above the surface where they can be easily imaged, manipulated and transferred into other on-chip potentials.