Abstract The characterization of a quantum device is a crucial step in the development of quantum experiments. This is accomplished via Quantum Process Tomography, which combines the outcomes of different projective measurements to deliver a possible reconstruction of the underlying process. The tomography is typically performed by processing an overcomplete set of measurements and extracting the process matrix from maximum-likelihood estimation. Here, we introduce Fourier Quantum Process Tomography, a technique which requires a reduced number of measurements, and benchmark its performance against the standard maximum-likelihood approach. Fourier Quantum Process Tomography is based on measuring probability distributions in two conjugate spaces for different state preparations and projections. Exploiting the concept of phase retrieval, our scheme achieves a complete and robust characterization of the setup by processing a near-minimal set of measurements. We experimentally test the technique on different space-dependent polarization transformations, reporting average fidelities higher than 90% and significant computational advantage.
Abstract The characterization of a quantum device is a crucial step in the development of quantum experiments. This is accomplished via Quantum Process Tomography, which combines the outcomes of different projective measurements to deliver a possible reconstruction of the underlying process. The tomography is typically performed by processing an overcomplete set of measurements and extracting the process matrix from maximum-likelihood estimation. Here, we introduce Fourier Quantum Process Tomography, a technique which requires a reduced number of measurements, and benchmark its performance against the standard maximum-likelihood approach. Fourier Quantum Process Tomography is based on measuring probability distributions in two conjugate spaces for different state preparations and projections. Exploiting the concept of phase retrieval, our scheme achieves a complete and robust characterization of the setup by processing a near-minimal set of measurements. We experimentally test the technique on different space-dependent polarization transformations, reporting average fidelities higher than 90% and significant computational advantage.
Abstract In quantum-state tomography on sources with quantum degrees of freedom of large Hilbert spaces, inference of quantum states of light for instance, a complete characterization of the quantum states for these sources is often not feasible owing to limited resources. As such, the concepts of informationally incomplete state estimation becomes important. These concepts are ideal for applications to quantum channel/ process tomography, which typically requires a much larger number of measurement settings for a full characterization of a quantum channel. Some key aspects of both quantumstate and quantum-process tomography are arranged together in the form of a tutorial review article that is catered to students and researchers who are new to the field of quantum tomography, with focus on maximum-likelihood related techniques as instructive examples to illustrate these ideas.
Characterization of quantum processes is a preliminary step necessary in the development of quantum technology. The conventional method uses standard quantum process tomography, which requires d2 input states and d4 quantum measurements for a d-dimensional Hilbert space. These experimental requirements are compounded by the complexity of processing the collected data, which can take several orders of magnitude longer than the experiment itself. In this paper we propose an alternative self-guided algorithm for quantum process tomography, tuned for the task of finding an unknown unitary process. Our algorithm is a fully automated and adaptive process characterization technique. The advantages of our algorithm are the following: it has an inherent robustness to both statistical and technical noise; it requires less space and time since there is no postprocessing of the data; it requires only a single input state and measurement; and it provides on-the-fly diagnostic information while the experiment is running. Numerical results show our algorithm achieves the same 1/n scaling as standard quantum process tomography when n uses of the unknown process are used. We also present experimental results wherein the algorithm and its advantages are realized for the task of finding an element of SU(2).
Full characterization of quantum states and processes is a fundamental requirement for verification and benchmarking of quantum devices. It has been realized in systems with few components, but for larger systems it becomes unfeasible because of the exponential growing with the system size of the number of measurements and the amount of computational power required to process them. A new approach for quantum state tomography and quantum process tomography, requiring a limited number of measurements, has been recently introduced by Maciel et al. [Quantum Inf. Comput. 12, 0442 (2012); Int. J. Mod. Phys. C 22, 1361 (2011).], namely variational quantum-process tomography (VQT). Here we adopt the VQT approach for the experimental characterization of two-qubit quantum processes and compare the reconstructed maps with those obtained by standard tomographic methods. The results demonstrate the high performance of this approach and propose VQT as a powerful alternative to the standard quantum process tomography.
Engineering of quantum computers requires reliable characterization of qubits, quantum operations, and even the entire hardware. Quantum tomography is an indispensable framework in quantum characterization, verification, and validation (QCVV), which has been widely accepted by researchers. According to the tomographic target, quantum tomography can be categorized into quantum state tomography (QST), quantum process tomography (QPT), gate set tomography (GST), process tensor tomography (PTT), and instrument set tomography (IST). Standard quantum tomography toolkits generally consist of basic linear inverse methods and statistical maximum likelihood estimation (MLE) based methods. Furthermore, the performance of standard methods, including effectiveness and efficiency, has been further developed by exploiting Bayesian estimation, neural networks, matrix completion techniques, etc. In this review, we introduce the fundamental quantum tomography techniques, including QST, QPT, GST, PTT, and IST. We first introduce the details of basic linear inverse methods. Then, the framework of MLE methods with constraints is summarized. Finally, we briefly introduce recent further research in developing the performance of tomography. This review provides a primary getting-start in developing quantum tomography, which promotes quantum computer development.
The impressive pace of advance of quantum technology calls for robust and scalable techniques for the characterization and validation of quantum hardware. Quantum process tomography, the reconstruction of an unknown quantum channel from measurement data, remains the quintessential primitive to completely characterize quantum devices. However, due to the exponential scaling of the required data and classical post-processing, its range of applicability is typically restricted to one- and two-qubit gates. Here, we present a technique for performing quantum process tomography that addresses these issues by combining a tensor network representation of the channel with a data-driven optimization inspired by unsupervised machine learning. We demonstrate our technique through synthetically generated data for ideal one- and two-dimensional random quantum circuits of up to 10 qubits, and a noisy 5-qubit circuit, reaching process fidelities above 0.99 using several orders of magnitude fewer (single-qubit) measurement shots than traditional tomographic techniques. Our results go far beyond state-of-the-art, providing a practical and timely tool for benchmarking quantum circuits in current and near-term quantum computers.
The temporal evolution of a quantum system can be characterized by quantum process tomography, a complex task that consumes a number of physical resources scaling exponentially with the number of subsystems. An alternative approach to the full reconstruction of a quantum channel is the selective and efficient quantum process tomography, a method that allows estimating, individually and up to the required accuracy, each element of the matrix that describes the process, using only a polynomial amount of resources. The implementation of this protocol is closely related to the possibility of building a complete set of mutually unbiased bases (MUBs), whose existence is known only when the dimension of the Hilbert space is the power of a prime number. However, an extension of the method that uses tensor products of maximal sets of MUBs has been recently introduced. Here we explicitly describe how to implement the algorithm for a selective and efficient estimation of a quantum process in a nonprime power dimension and conduct, an experimental verification of the method in a Hilbert space of dimension d=6. This is the smallest space for which a complete set of MUBs is not known to exist, but it can be decomposed as a tensor product of two Hilbert spaces of dimensions D1=2 and D2=3, in which a complete set of MUBs is already known. The six-dimensional states were codified in the discretized transverse linear momentum of photons. The state preparation and detection stages are dynamically programed with the use of only-phase spatial light modulators, in a versatile experimental setup that allows one to implement the algorithm in any finite dimension.