Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1908.01082 · Physical Review A

Experimental realization of self-guided quantum process tomography

Zhibo Hou, Jun-Feng Tang, Christopher Ferrie, Guo‐Yong Xiang, Chuan‐Feng Li, Guang‐Can Guo

Published Feb 18, 2020• 25 citations
arXivHTMLPDF

Abstract

Characterization of quantum processes is a preliminary step necessary in the development of quantum technology. The conventional method uses standard quantum process tomography, which requires ${d}^{2}$ input states and ${d}^{4}$ quantum measurements for a $d$-dimensional Hilbert space. These experimental requirements are compounded by the complexity of processing the collected data, which can take several orders of magnitude longer than the experiment itself. In this paper we propose an alternative self-guided algorithm for quantum process tomography, tuned for the task of finding an unknown unitary process. Our algorithm is a fully automated and adaptive process characterization technique. The advantages of our algorithm are the following: it has an inherent robustness to both statistical and technical noise; it requires less space and time since there is no postprocessing of the data; it requires only a single input state and measurement; and it provides on-the-fly diagnostic information while the experiment is running. Numerical results show our algorithm achieves the same $1/n$ scaling as standard quantum process tomography when $n$ uses of the unknown process are used. We also present experimental results wherein the algorithm and its advantages are realized for the task of finding an element of SU(2).

DOI
10.1103/physreva.101.022317

Related papers

Variational quantum process tomography of unitaries

Shichuan Xue, Yong Liu, Yan Wang +3 more

Quantum process tomography is an experimental technique to fully characterize an unknown quantum process. Standard quantum process tomography suffers from exponentially scaling of the number of measurements with the increasing system size. In this work, we put forward a quantum machine learning algorithm which approximately encodes the unknown unitary quantum process into a relatively shallow depth parametric quantum circuit. We demonstrate our method by reconstructing the unitary quantum processes resulting from the quantum Hamiltonian evolution and random quantum circuits up to eight qubits. Results show that those quantum processes could be reconstructed with high fidelity, while the number of input states required are at least two orders of magnitude less than required by the standard quantum process tomography.

arXiv:2108.02351•Physical Review A•Mar 14, 2022•38 citations

Two Unitary Quantum Process Tomography Algorithms Robust to Systematic Errors

François Verdeil, Yannick Deville

Quantum process tomography (QPT) methods aim at identifying a given quantum process. QPT is a major quantum information processing tool, since it especially allows one to characterize the actual behavior of quantum gates, which are the building blocks of quantum computers. The present paper focuses on the estimation of a unitary process. This class is of particular interest because quantum mechanics postulates that the evolution of any closed quantum system is described by a unitary transformation. Unitary processes have significantly fewer parameters than general quantum processes (22nqb vs. 24nqb−22nqb real independent parameters for nqb qubits). By assuming that the process is unitary we develop two methods that scale better with the size of the system. In the present paper, we stay as close as possible to the standard setup of QPT: the operator has to prepare copies of different input states. The properties those states have to satisfy in order for our method to achieve QPT are very mild. Therefore, we choose to operate with copies of 2nqb initially unknown pure input states. In order to perform QPT without knowing the input states, we perform measurements on half the copies of each state, and let the other half be transformed by the system before measuring them (each copy is only measured once). This setup has the advantage of removing the issue of systematic (i.e., same on all the copies of a state) errors entirely because it does not require the process input to take predefined values. We develop a straightforward analytical solution that first estimates the states from the averaged measurements and then finds the unitary matrix (representing the process) coherent with those estimates by using our analytical solution to an extended version of Wahba’s problem. This estimate may then be used as an initial point for a fine tuning algorithm that maximizes the likelihood of the measurements. Simulation results show the effectiveness of the proposed methods.

International Workshop on Bayesian Inference and Maximum Entropy Methods in Science and Engineering (MaxEnt)•Dec 12, 2022•0 citations

Self-Guided Quantum Tomography

Christopher Ferrie

We introduce a self-learning tomographic technique in which the experiment guides itself to an estimate of its own state. Self-guided quantum tomography uses measurements to directly test hypotheses in an iterative algorithm which converges to the true state. We demonstrate through simulation on many qubits that Self-guided quantum tomography is a more efficient and robust alternative to the usual paradigm of taking a large amount of informationally complete data and solving the inverse problem of postprocessed state estimation.

arXiv:1406.4101•Physical Review Letters•Nov 7, 2014•124 citations

Efficient identification of unitary quantum processes

Yuanlong Wang, Qi Yin, Daoyi Dong +5 more

Identifying an unknown unitary quantum process is a fundamental task in the development of quantum technology. In this paper, we propose an efficient identification algorithm for estimating unitary processes. In the method, input pure states are used and a fast quantum state tomography algorithm is developed to reconstruct the output states. Then the information of the output states is used to estimate the unitary process. The identification algorithm has computational complexity O(d3) for a d-dimensional system. Numerical results show that the proposed identification algorithm is much more efficient than the maximum likelihood estimation method and works well for input mixed states with high purity. An analytical upper bound for the identification error is also provided, and numerical simulations and experimental results on quantum optical systems verify the theoretical results.

Australian & New Zealand Control Conference (ANZCC)•Dec 1, 2017•2 citations

Variational Quantum Process Tomography of Non-Unitaries

Shichuan Xue, Yizhi Wang, Yong Liu +2 more

Quantum process tomography is a fundamental and critical benchmarking and certification tool that is capable of fully characterizing an unknown quantum process. Standard quantum process tomography suffers from an exponentially scaling number of measurements and complicated data post-processing due to the curse of dimensionality. On the other hand, non-unitary operators are more realistic cases. In this work, we put forward a variational quantum process tomography method based on the supervised quantum machine learning framework. It approximates the unknown non-unitary quantum process utilizing a relatively shallow depth parametric quantum circuit and fewer input states. Numerically, we verified our method by reconstructing the non-unitary quantum mappings up to eight qubits in two cases: the weighted sum of the randomly generated quantum circuits and the imaginary time evolution of the Heisenberg XXZ spin chain Hamiltonian. Results show that those quantum processes could be reconstructed with high fidelities (>99%) and shallow depth parametric quantum circuits (d≤8), while the number of input states required is at least two orders of magnitude less than the demands of the standard quantum process tomography. Our work shows the potential of the variational quantum process tomography method in characterizing non-unitary operators.

Entropy•Jan 1, 2023•6 citations

Practical adaptive quantum tomography

Christopher Granade, Christopher Ferrie, Steven T. Flammia

We introduce a fast and accurate heuristic for adaptive tomography that addresses many of the limitations of prior methods.Previous approaches were either too computationally intensive or tailored to handle special cases such as single qubits or pure states.By contrast, our approach combines the efficiency of online optimization with generally applicable and well-motivated data-processing techniques.We numerically demonstrate these advantages in several scenarios including mixed states, higher-dimensional systems, and restricted measurements.Quantum information processing (QIP) promises advantages in a wide range of different contexts, including machine learning [2-4], chemistry simulation [5][6][7], and number theory [8,9].As such, the experimental effort to build useful QIP devices has exploded in recent years.In the course of this effort, quantum tomography is a valuable tool for diagnosing and debugging small quantum devices, and has subsequently seen a variety of different advances.In particular, Bayesian approaches to tomography which are especially well suited to utilizing prior information and adapting to changing experimental conditions have developed significantly in recent years [10-13], presenting a useful experimental tool [14][15][16].In this paper we demonstrate the efficiency and accuracy of an adaptive tomography protocol that we call PAQT: practical adaptive quantum tomography.PAQT intelligently selects new measurements based on the outcomes of previous ones [10,[17][18][19][20][21].Adaptivity has been experimentally demonstrated [14,15,[22][23][24][25], but is not currently standard practice.Though adaptivity increases accuracy, the computational costs incurred outweigh that of simply repeating standard measurements many times.The PAQT approach employs a simple heuristic that can be efficiently computed between measurements, even with embedded hardware [26][27][28][29].The algorithm we propose is therefore compatible with modern experimental design and avoids an important limitation of previous approaches.We base our algorithm off of self-guided quantum tomography (SGQT), which treats adaptive tomography as a direct optimization problem rather than a new optimization problem between each measurement [30].Though this affords an efficient and easy to implement adaptive heuristic, SGQT is not without its limitations.It requires assuming that the target state is pure, and it does not return rich region estimates for a state.What PAQT achieves is to effectively combine SGQT with conventional and easily-implemented tomographic estimators, such as the Bayesian particle filter or least-squares fit (LSF) estimators.Under this approach, an experimentalist can collect data using SGQT (even if its assumptions are not met), and then post-process this data using particle filtering or LSF.The benefit of PAQT is two-fold.(1) From the point of view of traditional tomography, it gives an adaptive tomography protocol requiring only modest computational resources, as the bulk of the computational cost is offloaded to post-processing.(2) From the point of view of simulation-based optimization tomography (such as SGQT), it effectively augments the output with region estimation providing a statistically robust quantification of uncertainty.Thus, while we do not explicitly demonstrate that the improved scaling of Ferrie [30] remains in the more general case considered here, PAQT does provide a practical and efficient procedure for performing adaptive quantum tomography with rigorous statistical principles.

arXiv:1605.05039•New Journal of Physics•Sep 29, 2017•51 citations
Characterization of quantum processes is a preliminary step necessary in the development of quantum technology. The conventional method uses standard quantum process tomography, which requires d2{d}^{2}d2 input states and d4{d}^{4}d4 quantum measurements for a ddd-dimensional Hilbert space. These experimental requirements are compounded by the complexity of processing the collected data, which can take several orders of magnitude longer than the experiment itself. In this paper we propose an alternative self-guided algorithm for quantum process tomography, tuned for the task of finding an unknown unitary process. Our algorithm is a fully automated and adaptive process characterization technique. The advantages of our algorithm are the following: it has an inherent robustness to both statistical and technical noise; it requires less space and time since there is no postprocessing of the data; it requires only a single input state and measurement; and it provides on-the-fly diagnostic information while the experiment is running. Numerical results show our algorithm achieves the same 1/n1/n1/n scaling as standard quantum process tomography when nnn uses of the unknown process are used. We also present experimental results wherein the algorithm and its advantages are realized for the task of finding an element of SU(2).
Quantum process tomography is an experimental technique to fully characterize an unknown quantum process. Standard quantum process tomography suffers from exponentially scaling of the number of measurements with the increasing system size. In this work, we put forward a quantum machine learning algorithm which approximately encodes the unknown unitary quantum process into a relatively shallow depth parametric quantum circuit. We demonstrate our method by reconstructing the unitary quantum processes resulting from the quantum Hamiltonian evolution and random quantum circuits up to eight qubits. Results show that those quantum processes could be reconstructed with high fidelity, while the number of input states required are at least two orders of magnitude less than required by the standard quantum process tomography.
Quantum process tomography (QPT) methods aim at identifying a given quantum process. QPT is a major quantum information processing tool, since it especially allows one to characterize the actual behavior of quantum gates, which are the building blocks of quantum computers. The present paper focuses on the estimation of a unitary process. This class is of particular interest because quantum mechanics postulates that the evolution of any closed quantum system is described by a unitary transformation. Unitary processes have significantly fewer parameters than general quantum processes (22nqb vs. 24nqb−22nqb real independent parameters for nqb qubits). By assuming that the process is unitary we develop two methods that scale better with the size of the system. In the present paper, we stay as close as possible to the standard setup of QPT: the operator has to prepare copies of different input states. The properties those states have to satisfy in order for our method to achieve QPT are very mild. Therefore, we choose to operate with copies of 2nqb initially unknown pure input states. In order to perform QPT without knowing the input states, we perform measurements on half the copies of each state, and let the other half be transformed by the system before measuring them (each copy is only measured once). This setup has the advantage of removing the issue of systematic (i.e., same on all the copies of a state) errors entirely because it does not require the process input to take predefined values. We develop a straightforward analytical solution that first estimates the states from the averaged measurements and then finds the unitary matrix (representing the process) coherent with those estimates by using our analytical solution to an extended version of Wahba’s problem. This estimate may then be used as an initial point for a fine tuning algorithm that maximizes the likelihood of the measurements. Simulation results show the effectiveness of the proposed methods.
We introduce a self-learning tomographic technique in which the experiment guides itself to an estimate of its own state. Self-guided quantum tomography uses measurements to directly test hypotheses in an iterative algorithm which converges to the true state. We demonstrate through simulation on many qubits that Self-guided quantum tomography is a more efficient and robust alternative to the usual paradigm of taking a large amount of informationally complete data and solving the inverse problem of postprocessed state estimation.
Identifying an unknown unitary quantum process is a fundamental task in the development of quantum technology. In this paper, we propose an efficient identification algorithm for estimating unitary processes. In the method, input pure states are used and a fast quantum state tomography algorithm is developed to reconstruct the output states. Then the information of the output states is used to estimate the unitary process. The identification algorithm has computational complexity O(d3) for a d-dimensional system. Numerical results show that the proposed identification algorithm is much more efficient than the maximum likelihood estimation method and works well for input mixed states with high purity. An analytical upper bound for the identification error is also provided, and numerical simulations and experimental results on quantum optical systems verify the theoretical results.
Quantum process tomography is a fundamental and critical benchmarking and certification tool that is capable of fully characterizing an unknown quantum process. Standard quantum process tomography suffers from an exponentially scaling number of measurements and complicated data post-processing due to the curse of dimensionality. On the other hand, non-unitary operators are more realistic cases. In this work, we put forward a variational quantum process tomography method based on the supervised quantum machine learning framework. It approximates the unknown non-unitary quantum process utilizing a relatively shallow depth parametric quantum circuit and fewer input states. Numerically, we verified our method by reconstructing the non-unitary quantum mappings up to eight qubits in two cases: the weighted sum of the randomly generated quantum circuits and the imaginary time evolution of the Heisenberg XXZ spin chain Hamiltonian. Results show that those quantum processes could be reconstructed with high fidelities (>99%) and shallow depth parametric quantum circuits (d≤8), while the number of input states required is at least two orders of magnitude less than the demands of the standard quantum process tomography. Our work shows the potential of the variational quantum process tomography method in characterizing non-unitary operators.
We introduce a fast and accurate heuristic for adaptive tomography that addresses many of the limitations of prior methods.Previous approaches were either too computationally intensive or tailored to handle special cases such as single qubits or pure states.By contrast, our approach combines the efficiency of online optimization with generally applicable and well-motivated data-processing techniques.We numerically demonstrate these advantages in several scenarios including mixed states, higher-dimensional systems, and restricted measurements.Quantum information processing (QIP) promises advantages in a wide range of different contexts, including machine learning [2-4], chemistry simulation [5][6][7], and number theory [8,9].As such, the experimental effort to build useful QIP devices has exploded in recent years.In the course of this effort, quantum tomography is a valuable tool for diagnosing and debugging small quantum devices, and has subsequently seen a variety of different advances.In particular, Bayesian approaches to tomography which are especially well suited to utilizing prior information and adapting to changing experimental conditions have developed significantly in recent years [10-13], presenting a useful experimental tool [14][15][16].In this paper we demonstrate the efficiency and accuracy of an adaptive tomography protocol that we call PAQT: practical adaptive quantum tomography.PAQT intelligently selects new measurements based on the outcomes of previous ones [10,[17][18][19][20][21].Adaptivity has been experimentally demonstrated [14,15,[22][23][24][25], but is not currently standard practice.Though adaptivity increases accuracy, the computational costs incurred outweigh that of simply repeating standard measurements many times.The PAQT approach employs a simple heuristic that can be efficiently computed between measurements, even with embedded hardware [26][27][28][29].The algorithm we propose is therefore compatible with modern experimental design and avoids an important limitation of previous approaches.We base our algorithm off of self-guided quantum tomography (SGQT), which treats adaptive tomography as a direct optimization problem rather than a new optimization problem between each measurement [30].Though this affords an efficient and easy to implement adaptive heuristic, SGQT is not without its limitations.It requires assuming that the target state is pure, and it does not return rich region estimates for a state.What PAQT achieves is to effectively combine SGQT with conventional and easily-implemented tomographic estimators, such as the Bayesian particle filter or least-squares fit (LSF) estimators.Under this approach, an experimentalist can collect data using SGQT (even if its assumptions are not met), and then post-process this data using particle filtering or LSF.The benefit of PAQT is two-fold.(1) From the point of view of traditional tomography, it gives an adaptive tomography protocol requiring only modest computational resources, as the bulk of the computational cost is offloaded to post-processing.(2) From the point of view of simulation-based optimization tomography (such as SGQT), it effectively augments the output with region estimation providing a statistically robust quantification of uncertainty.Thus, while we do not explicitly demonstrate that the improved scaling of Ferrie [30] remains in the more general case considered here, PAQT does provide a practical and efficient procedure for performing adaptive quantum tomography with rigorous statistical principles.