Noise on quantum devices is much more complex than it is commonly given credit. Far from usual models of decoherence, nearly all quantum devices are plagued by both a continuum of environments and temporal instabilities. These induce noisy quantum and classical correlations at the level of the circuit. The relevant spatiotemporal effects are difficult enough to understand, let alone combat. There is presently a lack of either scalable or complete methods to address the phenomena responsible for scrambling and loss of quantum information. Here, we make deep strides to remedy this problem. We establish a theoretical framework that uniformly incorporates and classifies all non-Markovian phenomena. Our framework is universal, assumes no parameters values, and is written entirely in terms of experimentally accessible circuit-level quantities. We formulate an efficient reconstruction using tensor network learning, allowing also for easy modularization and simplification based on the expected physics of the system. This is then demonstrated through both extensive numerical studies and implementations on IBM Quantum devices, estimating a comprehensive set of spacetime correlations. Finally, we conclude our analysis with applications thereof to the efficacy of control techniques to counteract these effects—including noise-aware circuit compilation and optimized dynamical decoupling. We find significant improvements are possible in the diamond norm and average gate fidelity of arbitrary SU(4) operations, as well as related decoupling improvements in contrast to off-the-shelf schemes.
Noise on quantum devices is much more complex than it is commonly given credit. Far from usual models of decoherence, nearly all quantum devices are plagued by both a continuum of environments and temporal instabilities. These induce noisy quantum and classical correlations at the level of the circuit. The relevant spatiotemporal effects are difficult enough to understand, let alone combat. There is presently a lack of either scalable or complete methods to address the phenomena responsible for scrambling and loss of quantum information. Here, we make deep strides to remedy this problem. We establish a theoretical framework that uniformly incorporates and classifies all non-Markovian phenomena. Our framework is universal, assumes no parameters values, and is written entirely in terms of experimentally accessible circuit-level quantities. We formulate an efficient reconstruction using tensor network learning, allowing also for easy modularization and simplification based on the expected physics of the system. This is then demonstrated through both extensive numerical studies and implementations on IBM Quantum devices, estimating a comprehensive set of spacetime correlations. Finally, we conclude our analysis with applications thereof to the efficacy of control techniques to counteract these effects—including noise-aware circuit compilation and optimized dynamical decoupling. We find significant improvements are possible in the diamond norm and average gate fidelity of arbitrary SU(4) operations, as well as related decoupling improvements in contrast to off-the-shelf schemes.
Spatial and temporal correlations in quantum noise challenge the local Markovian models commonly used in quantum information processing. We develop a unified operational framework for quantifying temporal, spatial, and total spatiotemporal correlations in general quantum processes. Using process tensors, we define these quantities through optimal distinguishability from Markovian, spatially local, and fully uncorrelated processes. Optimization over admissible probing combs ensures monotonicity under every superprocess that preserves the corresponding free set, while Choi-state functionals and restricted probes provide accessible lower bounds. We establish hierarchy and interpolation relations among the correlation measures and derive dimension-dependent upper bounds on temporal correlations transmitted by quantum memories, with tighter bounds for classical memory, together with universal ceilings imposed by the system dimension. These bounds turn certified lower estimates into witnesses of minimum memory dimension, nonclassicality under a memory-dimension constraint, and inconsistencies in the assumed process model. We illustrate the results with effective superconducting-qubit models featuring ZZ and XY interactions, exhibiting saturation of classical-memory, quantum-memory, and system-dimension ceilings. These results pave the way toward practical approaches to characterizing and addressing spatiotemporally correlated errors in quantum devices.
Abstract In the scale-up of quantum computers, the framework underpinning fault-tolerance generally relies on the strong assumption that environmental noise affecting qubit logic is uncorrelated (Markovian). However, as physical devices progress well into the complex multi-qubit regime, attention is turning to understanding the appearance and mitigation of correlated — or non-Markovian — noise, which poses a serious challenge to the progression of quantum technology. This error type has previously remained elusive to characterisation techniques. Here, we develop a framework for characterising non-Markovian dynamics in quantum systems and experimentally test it on multi-qubit superconducting quantum devices. Where noisy processes cannot be accounted for using standard Markovian techniques, our reconstruction predicts the behaviour of the devices with an infidelity of 10 −3 . Our results show this characterisation technique leads to superior quantum control and extension of coherence time by effective decoupling from the non-Markovian environment. This framework, validated by our results, is applicable to any controlled quantum device and offers a significant step towards optimal device operation and noise reduction.
As quantum devices make steady progress towards intermediate scale and fault-tolerant quantum computing, it is essential to develop rigorous and efficient measurement protocols that account for known sources of noise. Most existing quantum characterization protocols such as gate-set tomography and randomized benchmarking assume the noise acting on the qubits is Markovian. However, this assumption is often not valid, as for the case of 1/f charge noise or hyperfine nuclear spin noise. Here, we present a general framework for quantum process tomography (QPT) in the presence of time-correlated noise. We further introduce fidelity benchmarks that quantify the relative strength of different sources of Markovian and non-Markovian noise. As an application of our method, we perform a comparative theoretical and experimental analysis of silicon spin qubits. We first develop a detailed noise model that accounts for the dominant sources of noise and validate the model against experimental data. Applying our framework for time-correlated QPT, we find that the number of independent parameters needed to characterize one- and two-qubit gates can be compressed by 10× and 100× , respectively, when compared to the fully generic case. These compressions reduce the amount of tomographic measurements needed in experiment, while also significantly speeding up numerical simulations of noisy quantum circuit dynamics compared to time-dependent Hamiltonian simulation. Using this compressed noise model, we find good agreement between our theoretically predicted process fidelities and two-qubit interleaved randomized benchmarking fidelities of 99.8% measured in recent experiments on silicon spin qubits. More broadly, our formalism can be directly extended to develop efficient and scalable tuning protocols for high-fidelity control of large arrays of quantum devices with non-Markovian noise. Published by the American Physical Society 2024
Currently, there is no systematic way to describe a quantum process with memory solely in terms of experimentally accessible quantities. However, recent technological advances mean we have control over systems at scales where memory effects are non-negligible. The lack of such an operational description has hindered advances in understanding physical, chemical, and biological processes, where often unjustified theoretical assumptions are made to render a dynamical description tractable. This has led to theories plagued with unphysical results and no consensus on what a quantum Markov (memoryless) process is. Here, we develop a universal framework to characterize arbitrary non-Markovian quantum processes. We show how a multitime non-Markovian process can be reconstructed experimentally, and that it has a natural representation as a many-body quantum state, where temporal correlations are mapped to spatial ones. Moreover, this state is expected to have an efficient matrix-product-operator form in many cases. Our framework constitutes a systematic tool for the effective description of memory-bearing open-system evolutions.
Evaluating the reliability of noisy quantum circuits is essential for implementing quantum algorithms on noisy quantum devices. However, current quantum hardware exhibits diverse noise mechanisms whose compounded effects make accurate and efficient reliability evaluation challenging. While state fidelity is the most faithful indicator of circuit reliability, it is experimentally and computationally prohibitive to obtain. Alternative metrics, although easier to compute, often fail to accurately reflect circuit reliability, lack universality across circuit types, or offer limited interpretability. To address these challenges, we propose a fine-grained, scalable, and interpretable framework for efficient and accurate reliability evaluation of noisy quantum circuits. Our approach performs a state-independent analysis to model how circuit reliability progressively degrades during execution. We introduce the Noise Proxy Circuit (NPC), which removes all logical operations while preserving the complete sequence of noise channels, thereby providing an abstraction of cumulative noise effects. Based on the NPC, we define Proxy Fidelity, a reliability metric that quantifies both qubit-level and circuit-level reliability. We further develop an analytical algorithm to estimate Proxy Fidelity under depolarizing, thermal relaxation, and readout error channels. The proposed framework achieves fidelity-level reliability estimation while remaining execution-free, scalable, and interpretable. Experimental results show that our method accurately estimates circuit fidelity, with an average absolute difference (AAD) ranging from 0.031 to 0.069 across diverse circuits and devices.
Noise is both ubiquitous and generally deleterious in settings where precision is required. This is especially true in the quantum technology sector where system utility typically decays rapidly under its influence. Understanding the noise in quantum devices is thus a prerequisite for efficient strategies to mitigate or even eliminate its harmful effects. However, this requires resources that are often prohibitive, such that the typically used noise models rely on simplifications that sometimes depart from experimental reality. Here we derive a compact microscopic error model for single-qubit gates that only requires a single experimental input—the noise power spectral density. Our model goes beyond standard depolarizing or Pauli-twirled noise models, explicitly including non-Clifford and non-Markovian contributions to the dynamical error map. We gauge our predictions for experimentally relevant metrics against established characterization techniques run on a trapped-ion quantum computer. In particular, we find that experimental estimates of average gate errors measured through randomized benchmarking and reconstructed via quantum process tomography are tightly lower-bounded by our analytical estimates, while the depolarizing model overestimates the gate error. Our noise modeling including non-Markovian contributions can be readily applied to established frameworks such as dynamical decoupling and dynamically corrected gates, or to provide more realistic thresholds for quantum error correction.