Near-term quantum computing technologies grapple with huge complexity overheads, hindering their ability to induce algorithms, necessitating engineering and scientific innovations. One class of problems of interest is Quantum Simulation, whereby quantum systems are simulated using a quantum computer. However, current devices are yet to surpass classical tensor network techniques. For problems of interest, where classical simulation techniques fail, large degrees of entanglement are required. Another challenge of implementing quantum simulation problems is that qubits sit idle whilst alternating simulation terms are implemented, exposing the system to decoherence. In the near term, 2D planar superconducting lattices of circuit-QED elements such as the transmon continue to draw substantial attention, but they are hindered by their nearest neighbor topology and relatively short lifespan, two problems that are problematic for quantum simulation. One technology of particular interest is the multi-mode superconducting resonator capable of storing multiple qubits in one device. We observe that these cavities have a natural virtual topology that aligns particularly well with quantum simulation problems, and exhibit much longer lifespans in comparison to other planar superconducting hardware. In this paper we present MUCIC, we discuss the simple integration of these devices into the current landscape and their implications to quantum simulation, motivated by their alignment to the quantum simulation problem, and potential as a quantum memory candidate. We report the development of MUCICs transpiler, leading to reductions of up to 82% in quantum simulation circuit depths. Additionally, our investigation demonstrates improvements of up to 19.4% in converged results from Variational Quantum Algorithms.
Near-term quantum computing technologies grapple with huge complexity overheads, hindering their ability to induce algorithms, necessitating engineering and scientific innovations. One class of problems of interest is Quantum Simulation, whereby quantum systems are simulated using a quantum computer. However, current devices are yet to surpass classical tensor network techniques. For problems of interest, where classical simulation techniques fail, large degrees of entanglement are required. Another challenge of implementing quantum simulation problems is that qubits sit idle whilst alternating simulation terms are implemented, exposing the system to decoherence. In the near term, 2D planar superconducting lattices of circuit-QED elements such as the transmon continue to draw substantial attention, but they are hindered by their nearest neighbor topology and relatively short lifespan, two problems that are problematic for quantum simulation. One technology of particular interest is the multi-mode superconducting resonator capable of storing multiple qubits in one device. We observe that these cavities have a natural virtual topology that aligns particularly well with quantum simulation problems, and exhibit much longer lifespans in comparison to other planar superconducting hardware. In this paper we present MUCIC, we discuss the simple integration of these devices into the current landscape and their implications to quantum simulation, motivated by their alignment to the quantum simulation problem, and potential as a quantum memory candidate. We report the development of MUCICs transpiler, leading to reductions of up to 82% in quantum simulation circuit depths. Additionally, our investigation demonstrates improvements of up to 19.4% in converged results from Variational Quantum Algorithms.
Current, near-term quantum devices have shown great progress in the last several years culminating recently with a demonstration of quantum supremacy. In the medium-term, however, quantum machines will need to transition to greater reliability through error correction, likely through promising techniques like surface codes which are well suited for near-term devices with limited qubit connectivity. We discover quantum memory, particularly resonant cavities with transmon qubits arranged in a 2.5D architecture, can efficiently implement surface codes with substantial hardware savings and performance/fidelity gains. Specifically, we virtualize logical qubits by storing them in layers of qubit memories connected to each transmon. Surprisingly, distributing each logical qubit across many memories has a minimal impact on fault tolerance and results in substantially more efficient operations. Our design permits fast transversal application of CNOT operations between logical qubits sharing the same physical address (same set of cavities) which are 6x faster than standard lattice surgery CNOTs. We develop a novel embedding which saves approximately 10x in transmons with another 2x savings from an additional optimization for compactness. Although qubit virtualization pays a 10x penalty in serialization, advantages in the transversal CNOT and in area efficiency result in fault-tolerance and performance comparable to conventional 2D transmon-only architectures. Our simulations show our system can achieve fault tolerance comparable to conventional two-dimensional grids while saving substantial hardware. Furthermore, our architecture can produce magic states at 1.22x the baseline rate given a fixed number of transmon qubits. This is a critical benchmark for future fault-tolerant quantum computers as magic states are essential and machines will spend the majority of their resources continuously producing them. This architecture substantially reduces the hardware requirements for fault-tolerant quantum computing and puts within reach a proof-of-concept experimental demonstration of around 10 logical qubits, requiring only 11 transmons and 9 attached cavities in total.
The existing scalable superconducting quantum processors have only nearest-neighbor coupling. This leads to a reduced circuit depth, requiring a large series of gates to perform an arbitrary unitary operation in such systems. Recently, multi-modal devices have been demonstrated as a promising candidate for small quantum processor units. Always on longitudinal coupling in such circuits leads to implementation of native high fidelity multi-qubit gates. We propose an architecture using such devices as building blocks for a highly connected larger quantum circuit. To demonstrate a quantum operation between such blocks, a standard transmon is coupled to the multi-modal circuit using a 3D bus cavity giving rise to small exchange interaction between the transmon and one of the modes. We study the cross-resonance interaction in such systems and characterize the entangling operation and the unitary imperfections and crosstalk as a function of device parameters. Finally, we tune up the cross-resonance drive to implement multi-qubit gates in this architecture.
Superconducting circuit quantum electrodynamics is the main architecture for implementation of quantum processors. This work presents a proposal to miniaturize quantum memory devices by combining the quantum memory qubits encoded directly in the first two Fock states ${|0\ensuremath{\rangle},|1\ensuremath{\rangle}}$ and the bus channel in the same specially designed multimode cavity. One key feature of the resonant modes used for quantum memory is that the microwave current is localized, which facilitates the storage and retrieval of information in superconducting qubits while preventing crosstalk from other resonant modes. Frequency design and distinct coupling strengths in this kind of device are analyzed with electromagnetic simulations and numerical calculations. The quantum memory properties, e.g., storage speed, fidelity, and stability, are examined in four cases: (1) memory operation of single-qubit state, (2) disturbing effects, (3) coupling operation, and (4) entangled states storage. Decoherence time of the quantum processor can be extended to more than one order of magnitude longer than that without the memory. By integrating transmons with optimally designed coplanar waveguide multimode quantum memories, the present study could provide an optimistic perspective for the development of large-scale superconducting quantum processors.
Quantum simulations of many-body systems in materials science and chemistry are promising application areas for quantum computers. However, the limited scale and coherence of near-term quantum processors pose a significant obstacle to realizing this potential. Here, we theoretically outline how a single-mode circuit quantum electrodynamics device, consisting of a transmon qubit coupled to a long-lived cavity mode, can be used to simulate the ground state of a highly entangled quantum many-body spin chain. We exploit recently developed methods for implementing quantum operations to sequentially build up a matrix product state (MPS) representation of a many-body state. This approach reuses the transmon qubit to read out the state of each spin in the chain and exploits the large state space of the cavity as a quantum memory encoding intersite correlations and entanglement. We show, through simulation, that analog (pulse-level) control schemes can accurately prepare a known MPS representation of a quantum critical spin chain in significantly less time than digital (gate-based) methods, thereby reducing the exposure to decoherence. We then explore this analog-control approach for the variational preparation of an unknown ground state. We demonstrate that the large state space of the cavity can be used to replace multiple qubits in a qubit-only architecture, and could therefore simplify the design of quantum processors for materials simulation. We explore the practical limitations of realistic noise and decoherence and discuss avenues for scaling this approach to more complex problems that challenge classical computational methods.
Abstract In digital quantum simulation of fermionic models with qubits, non-local maps for encoding are often encountered. Such maps require linear or logarithmic overhead in circuit depth which could render the simulation useless, for a given decoherence time. Here we show how one can use a cavity–QED system to perform digital quantum simulation of fermionic models. In particular, we show that highly nonlocal Jordan–Wigner or Bravyi–Kitaev transformations can be efficiently implemented through a hardware approach. The key idea is using ancilla cavity modes, which are dispersively coupled to a qubit string, to collectively manipulate and measure qubit states. Our scheme reduces the circuit depth in each Trotter step of the Jordan–Wigner encoding by a factor ofN2, comparing to the scheme for a device with only local connectivity, whereNis the number of orbitals for a generic two-body Hamiltonian. Additional analysis for the Fermi–Hubbard model on anN × Nsquare lattice results in a similar reduction. We also discuss a detailed implementation of our scheme with superconducting qubits and cavities.
Over the last decade, quantum simulation and computation has progressed from a purely scientific testbed of quantum mechanics to a mature field that is starting to offer new insights into materials, quantum effects, and algorithms that are intractable with even the most state-of-the-art classical computation. Simulating certain quantum Hamiltonians that are theorized to be at the heart of high-Tc superconductivity, topological quantum systems such as the fractional quantum Hall effect or fundamental questions of thermalization quickly exceed the available memory of even the most advanced supercomputers – and in fact all memory in the world – due to the exponential growth of the Hilbert space with system size. As postulated by Feynman himself, the computational system best suited for solving quantum problems is to use a quantum system itself, as it can intrinsically represent the entanglement that is the key resource making quantum computing challenging but also promising. Apart from simulating problems in physics and chemistry, there is also tremendous excitement for quantum computers to provide speedups for general algorithms in optimization at a rate that is exponentially faster than existing classical programming. So far only a small class of algorithms has been actually proven to provide such a speedup, most prominently Shor's algorithm which can factor large prime numbers, and several other search and oracle algorithms. In the last two decades, many experiments using ultracold atoms, ions, or superconducting circuits have focused on analog quantum simulation. Here, a model Hamiltonian that is believed to capture all the relevant physics of the system of study is experimentally realized using different building blocks and interactions but replicating condensed matter effects at an increased scale. This has led to a number of bespoke experiments such as BEC/Fermigass machines, quantum gas microscopes and more exotic setups that are purpose built to study a particular effect. More recently, there has been a shift to develop more universal simulation platforms and optical tweezer arrays have emerged as a leading solution due to their high degree of reconfigurability. Through tremendous improvements in the degree of control and measurement of single qubits, error correction has become a viable route to build a true universal digital quantum computer. Even as we transition into the digital age of quantum simulation, certain classes of problems with additional physics constraints such as Fermionic statistics, gauge fields and lattice gauge theories still incur too large of an overhead to be encoded on these digital simulators. In this thesis, we use a highly degenerate twisted cavity to simulate the effect of a magnetic field on a two-dimensional system of interacting photons to enable realization of states of the quantum Hall effect. We design, build, and commission a new lens based cavity apparatus realizing a lowest Landau level for a mesoscopic number of modes. We demonstrate the integration of highly excited Rydberg atoms to mediate strong interactions and demonstrate photon blockade as well as mean field interactions. As a second application of cavities to quantum information leveraging our newfound comfort with intra-cavity optics, and experience with aberration modeling in resonators, we demonstrate a new class of small waist optical resonators enabled by lens-based cavities and then apply our understanding of optical aberrations in cavities to the development of a new class of cavity array. This Cavity Array Microscope (CAM) realizes a large number of cavities (up to currently 600) using only a fixed number of free space optics and is both scalable with constant overhead as well as compatible with Rydberg atoms. This platform provides a route to highly parallel quantum repeater operation or entanglement generation between atom arrays in the future.