Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1912.10953 · Applied Physics Letters

Engineering cross resonance interaction in multi-modal quantum circuits

Sumeru Hazra, Kishor V. Salunkhe, Anirban Bhattacharjee, Gaurav Bothara, Suman Kundu, Tanay Roy, Meghan P. Patankar, R. Vijay

Published Apr 13, 2020• 13 citations
arXivHTMLPDF

Abstract

The existing scalable superconducting quantum processors have only nearest-neighbor coupling. This leads to a reduced circuit depth, requiring a large series of gates to perform an arbitrary unitary operation in such systems. Recently, multi-modal devices have been demonstrated as a promising candidate for small quantum processor units. Always on longitudinal coupling in such circuits leads to implementation of native high fidelity multi-qubit gates. We propose an architecture using such devices as building blocks for a highly connected larger quantum circuit. To demonstrate a quantum operation between such blocks, a standard transmon is coupled to the multi-modal circuit using a 3D bus cavity giving rise to small exchange interaction between the transmon and one of the modes. We study the cross-resonance interaction in such systems and characterize the entangling operation and the unitary imperfections and crosstalk as a function of device parameters. Finally, we tune up the cross-resonance drive to implement multi-qubit gates in this architecture.

DOI
10.1063/1.5143440

Related papers

Quantum Crosstalk Analysis for Simultaneous Gate Operations on Superconducting Qubits

Peng Zhao, Kehuan Linghu, Zhiyuan Li +5 more

Maintaining or even improving gate performance with growing numbers of parallel controlled qubits is a vital requirement for fault-tolerant quantum computing.For superconducting quantum processors, though isolated one-or two-qubit gates have been demonstrated with high fidelity, implementing these gates in parallel commonly shows worse performance.Generally, this degradation is attributed to various crosstalks between qubits, such as quantum crosstalk due to residual inter-qubit coupling.An understanding of the exact nature of these crosstalks is critical to figuring out respective mitigation schemes and improved qubit architecture designs with low crosstalk.Here we give a theoretical analysis of quantum crosstalk impact on simultaneous gate operations in a qubit architecture, where fixed-frequency transmon qubits are coupled via a tunable bus, and sub-100-ns controlled-Z (CZ) gates can be realized by applying a baseband flux pulse on the bus.Our analysis shows that for microwave-driven single-qubit gates, the dressing from the qubit-qubit coupling can cause non-negligible cross-driving errors when qubits operate near frequency collision regions.During CZ gate operations, although unwanted nearest-neighbor interactions are nominally turned off, sub-MHz parasitic next-nearest-neighbor interactions involving spectator qubits can still exist, causing considerable leakage or control error when one operates qubit systems around these parasitic resonance points.To ensure high-fidelity simultaneous operations, a request could be raised to figure out a better way to balance the gate error from target qubit systems themselves and the error from nonparticipating spectator qubits.Overall, our analysis suggests that towards useful quantum processors, the qubit architecture should be examined carefully in the context of high-fidelity simultaneous gate operations in a scalable qubit lattice.

arXiv:2110.12570•PRX Quantum•Apr 1, 2022•108 citations

Multi-mode Bus Coupling Architecture of Superconducting Quantum Processor

Changhao Zhao, Yongcheng He, Geng Xiao +4 more

Abstract Resonators in circuit quantum electrodynamics systems naturally carry multiple modes, which may have non-negligible influence on qubit parameters and device performance. While new theories and techniques are under investigation to deal with the multi-mode effects in circuit quantum electrodynamics systems, novel engineering designs are also proposed featuring multi-mode resonators to achieve enhanced functionalities of superconducting quantum processors. In this work, multi-mode bus coupling architecture is proposed, in which superconducting qubits are coupled to multiple bus resonators to gain larger coupling strength. Application of multi-mode bus coupler can help improve iSWAP gate fidelity and gate speed beyond the limit of single-mode scenario. The proposed multi-mode bus coupling architecture is compatible with a scalable variation of the traditional bus coupling architecture. It opens up new possibilities for realization of scalable superconducting quantum computation with circuit quantum electrodynamics systems.

Chinese Physics Letters•Dec 6, 2022•0 citations

All-Microwave Multiqubit Gates

Guanqi Wang, Yao Song, Peng-Bo Li +1 more

Implementing high-fidelity multiqubit gates is critical for reducing circuit depth in near-term quantum processors and fault-tolerant architectures. However, realizing multiqubit interactions and entanglement remains a critical challenge that limits the implementation of multiqubit gates. Here we propose an all-microwave scheme to realize single-step multiqubit gates incorporating n control and m target qubits, tailored for frequency-tunable superconducting transmon networks. By leveraging cross-resonance (CR) drives, this approach induces effective two-body ZX interactions that are significantly stronger than those achieved in conventional resonant regimes, circumventing the need for tunable couplers. The system's effective Hamiltonian is analytically derived using both quad frame rotation and rigorous block diagonalization. These combined theoretical methods facilitate the identification of optimal parameter regimes that simultaneously enhance desired target couplings and suppress parasitic higher-order terms, such as ZXX interactions. Through numerical simulations and gradient-based pulse-shape optimization, we demonstrate three-qubit gates achieving fidelities exceeding 99.9% within a 60 ns gate duration. Furthermore, we evaluate the fundamental scalability of this framework by extending the optimization to a five-qubit CXXXX architecture, confirming the physical viability of the multi-target driving scheme. Because these multiqubit operations naturally emulate stabilizer measurements, this architecture provides a hardware-efficient strategy for reducing the circuit depth of stabilizer-type operations by replacing sequential two-qubit gate decompositions with single-step multiqubit gates.

quant-pharXiv:2609.39834•Oct 1, 2026•0 citations

Multi-Mode Bus Coupling Architecture of Superconducting Quantum Processor

Changhao Zhao, Yongcheng He, Xiao Geng +4 more

Resonators in circuit quantum electrodynamics systems naturally carry multiple modes, which may have non-negligible influence on qubit parameters and device performance. While new theories and techniques are under investigation to deal with the multi-mode effects in circuit quantum electrodynamics systems, researchers have proposed novel engineering designs featuring multi-mode resonators to achieve enhanced functionalities of superconducting quantum processors. Here, we propose multi-mode bus coupling architecture, in which superconducting qubits are coupled to multiple bus resonators to gain larger coupling strength. Applications of multi-mode bus couplers can be helpful for improving iSWAP gate fidelity and gate speed beyond the limit of single-mode scenario. The proposed multi-mode bus coupling architecture is compatible with a scalable variation of the traditional bus coupling architecture. It opens up new possibilities for realization of scalable superconducting quantum computation with circuit quantum electrodynamics systems.

Chinese Physics Letters•Jan 1, 2023•4 citations

Random access quantum information processors using multimode circuit quantum electrodynamics

Ravi Naik, N. Leung, Srivatsan Chakram +6 more

Qubit connectivity is an important property of a quantum processor, with an ideal processor having random access-the ability of arbitrary qubit pairs to interact directly. This a challenge with superconducting circuits, as state-of-the-art architectures rely on only nearest-neighbor coupling. Here, we implement a random access superconducting quantum information processor, demonstrating universal operations on a nine-qubit memory, with a Josephson junction transmon circuit serving as the central processor. The quantum memory uses the eigenmodes of a linear array of coupled superconducting resonators. We selectively stimulate vacuum Rabi oscillations between the transmon and individual eigenmodes through parametric flux modulation of the transmon frequency. Utilizing these oscillations, we perform a universal set of quantum gates on 38 arbitrary pairs of modes and prepare multimode entangled states, all using only two control lines. We thus achieve hardware-efficient random access multi-qubit control in an architecture compatible with long-lived microwave cavity-based quantum memories.

arXiv:1705.00579•Nature Communications•Nov 28, 2017•138 citations

Resonant direct cnot in remote double quantum dot spin qubits

Stephen R. McMillan, Guido Burkard

A critical element towards the realization of scalable quantum processors is nonlocal coupling between nodes. Scaling connectivity beyond nearest-neighbor interactions requires the implementation of a mediating interaction often termed a quantum bus. Cavity photons have long been used as a bus by the superconducting qubit community, but it has only recently been demonstrated that spin-based qubits in double quantum dot architectures can reach the strong coupling regime and exhibit spin-spin interactions via the exchange of real or virtual photons. Two-qubit gate operations are predicted in the dispersive regime where cavity loss plays a less prominent role. In this work we combine a cross-resonance entangling drive with simultaneous local rotations to propose a framework for a resonant direct-cnot operation, between two nonlocal single-spin qubits dispersively coupled to a common mode of a superconducting resonator. We expect gate times near 100 ns and fidelities above 90% with existing technology.

Physical review. B./Physical review. B•Sep 12, 2023•8 citations
The existing scalable superconducting quantum processors have only nearest-neighbor coupling. This leads to a reduced circuit depth, requiring a large series of gates to perform an arbitrary unitary operation in such systems. Recently, multi-modal devices have been demonstrated as a promising candidate for small quantum processor units. Always on longitudinal coupling in such circuits leads to implementation of native high fidelity multi-qubit gates. We propose an architecture using such devices as building blocks for a highly connected larger quantum circuit. To demonstrate a quantum operation between such blocks, a standard transmon is coupled to the multi-modal circuit using a 3D bus cavity giving rise to small exchange interaction between the transmon and one of the modes. We study the cross-resonance interaction in such systems and characterize the entangling operation and the unitary imperfections and crosstalk as a function of device parameters. Finally, we tune up the cross-resonance drive to implement multi-qubit gates in this architecture.
Maintaining or even improving gate performance with growing numbers of parallel controlled qubits is a vital requirement for fault-tolerant quantum computing.For superconducting quantum processors, though isolated one-or two-qubit gates have been demonstrated with high fidelity, implementing these gates in parallel commonly shows worse performance.Generally, this degradation is attributed to various crosstalks between qubits, such as quantum crosstalk due to residual inter-qubit coupling.An understanding of the exact nature of these crosstalks is critical to figuring out respective mitigation schemes and improved qubit architecture designs with low crosstalk.Here we give a theoretical analysis of quantum crosstalk impact on simultaneous gate operations in a qubit architecture, where fixed-frequency transmon qubits are coupled via a tunable bus, and sub-100-ns controlled-Z (CZ) gates can be realized by applying a baseband flux pulse on the bus.Our analysis shows that for microwave-driven single-qubit gates, the dressing from the qubit-qubit coupling can cause non-negligible cross-driving errors when qubits operate near frequency collision regions.During CZ gate operations, although unwanted nearest-neighbor interactions are nominally turned off, sub-MHz parasitic next-nearest-neighbor interactions involving spectator qubits can still exist, causing considerable leakage or control error when one operates qubit systems around these parasitic resonance points.To ensure high-fidelity simultaneous operations, a request could be raised to figure out a better way to balance the gate error from target qubit systems themselves and the error from nonparticipating spectator qubits.Overall, our analysis suggests that towards useful quantum processors, the qubit architecture should be examined carefully in the context of high-fidelity simultaneous gate operations in a scalable qubit lattice.
Abstract Resonators in circuit quantum electrodynamics systems naturally carry multiple modes, which may have non-negligible influence on qubit parameters and device performance. While new theories and techniques are under investigation to deal with the multi-mode effects in circuit quantum electrodynamics systems, novel engineering designs are also proposed featuring multi-mode resonators to achieve enhanced functionalities of superconducting quantum processors. In this work, multi-mode bus coupling architecture is proposed, in which superconducting qubits are coupled to multiple bus resonators to gain larger coupling strength. Application of multi-mode bus coupler can help improve iSWAP gate fidelity and gate speed beyond the limit of single-mode scenario. The proposed multi-mode bus coupling architecture is compatible with a scalable variation of the traditional bus coupling architecture. It opens up new possibilities for realization of scalable superconducting quantum computation with circuit quantum electrodynamics systems.
Implementing high-fidelity multiqubit gates is critical for reducing circuit depth in near-term quantum processors and fault-tolerant architectures. However, realizing multiqubit interactions and entanglement remains a critical challenge that limits the implementation of multiqubit gates. Here we propose an all-microwave scheme to realize single-step multiqubit gates incorporating n control and m target qubits, tailored for frequency-tunable superconducting transmon networks. By leveraging cross-resonance (CR) drives, this approach induces effective two-body ZX interactions that are significantly stronger than those achieved in conventional resonant regimes, circumventing the need for tunable couplers. The system's effective Hamiltonian is analytically derived using both quad frame rotation and rigorous block diagonalization. These combined theoretical methods facilitate the identification of optimal parameter regimes that simultaneously enhance desired target couplings and suppress parasitic higher-order terms, such as ZXX interactions. Through numerical simulations and gradient-based pulse-shape optimization, we demonstrate three-qubit gates achieving fidelities exceeding 99.9% within a 60 ns gate duration. Furthermore, we evaluate the fundamental scalability of this framework by extending the optimization to a five-qubit CXXXX architecture, confirming the physical viability of the multi-target driving scheme. Because these multiqubit operations naturally emulate stabilizer measurements, this architecture provides a hardware-efficient strategy for reducing the circuit depth of stabilizer-type operations by replacing sequential two-qubit gate decompositions with single-step multiqubit gates.
Resonators in circuit quantum electrodynamics systems naturally carry multiple modes, which may have non-negligible influence on qubit parameters and device performance. While new theories and techniques are under investigation to deal with the multi-mode effects in circuit quantum electrodynamics systems, researchers have proposed novel engineering designs featuring multi-mode resonators to achieve enhanced functionalities of superconducting quantum processors. Here, we propose multi-mode bus coupling architecture, in which superconducting qubits are coupled to multiple bus resonators to gain larger coupling strength. Applications of multi-mode bus couplers can be helpful for improving iSWAP gate fidelity and gate speed beyond the limit of single-mode scenario. The proposed multi-mode bus coupling architecture is compatible with a scalable variation of the traditional bus coupling architecture. It opens up new possibilities for realization of scalable superconducting quantum computation with circuit quantum electrodynamics systems.
Qubit connectivity is an important property of a quantum processor, with an ideal processor having random access-the ability of arbitrary qubit pairs to interact directly. This a challenge with superconducting circuits, as state-of-the-art architectures rely on only nearest-neighbor coupling. Here, we implement a random access superconducting quantum information processor, demonstrating universal operations on a nine-qubit memory, with a Josephson junction transmon circuit serving as the central processor. The quantum memory uses the eigenmodes of a linear array of coupled superconducting resonators. We selectively stimulate vacuum Rabi oscillations between the transmon and individual eigenmodes through parametric flux modulation of the transmon frequency. Utilizing these oscillations, we perform a universal set of quantum gates on 38 arbitrary pairs of modes and prepare multimode entangled states, all using only two control lines. We thus achieve hardware-efficient random access multi-qubit control in an architecture compatible with long-lived microwave cavity-based quantum memories.
A critical element towards the realization of scalable quantum processors is nonlocal coupling between nodes. Scaling connectivity beyond nearest-neighbor interactions requires the implementation of a mediating interaction often termed a quantum bus. Cavity photons have long been used as a bus by the superconducting qubit community, but it has only recently been demonstrated that spin-based qubits in double quantum dot architectures can reach the strong coupling regime and exhibit spin-spin interactions via the exchange of real or virtual photons. Two-qubit gate operations are predicted in the dispersive regime where cavity loss plays a less prominent role. In this work we combine a cross-resonance entangling drive with simultaneous local rotations to propose a framework for a resonant direct-cnot operation, between two nonlocal single-spin qubits dispersively coupled to a common mode of a superconducting resonator. We expect gate times near 100 ns and fidelities above 90% with existing technology.