We investigate the possible realization of an ultracold-atom rotation sensor that is based on recently proposed tractor atom interferometry (TAI). An experimental design that includes the generation of a Laguerre–Gaussian-beam-based “pinwheel” optical lattice and multi-loop interferometric cycles is discussed. Numerical simulations of the proposed system demonstrate TAI rotation sensitivity comparable to that of contemporary matter-wave interferometers. We analyze a regime of TAI rotation sensors in which nonadiabatic effects may hinder the system's performance. We apply quantum optimal control to devise a methodology suitable to address this nonadiabaticity. Our studies are of interest for current efforts to realize compact and robust matter-wave rotation sensors, as well as for fundamental physics applications of TAI.
We investigate the possible realization of an ultracold-atom rotation sensor that is based on recently proposed tractor atom interferometry (TAI). An experimental design that includes the generation of a Laguerre–Gaussian-beam-based “pinwheel” optical lattice and multi-loop interferometric cycles is discussed. Numerical simulations of the proposed system demonstrate TAI rotation sensitivity comparable to that of contemporary matter-wave interferometers. We analyze a regime of TAI rotation sensors in which nonadiabatic effects may hinder the system's performance. We apply quantum optimal control to devise a methodology suitable to address this nonadiabaticity. Our studies are of interest for current efforts to realize compact and robust matter-wave rotation sensors, as well as for fundamental physics applications of TAI.
Abstract We present principles and possible design concepts for a tractor atom interferometer (TAI) based on three-dimensional confinement and transport of ultracold atoms. The confinement reduces device size and wave-packet dispersion, enables arbitrary holding times, and facilitates control to create complex trajectories that allow for optimization to enable fast splitting and recombination, to suppress detrimental nonadiabatic excitation, and to cancel unwanted sensitivity. Thus, the design allows for further advancement of compact, high-sensitivity, quantum sensing technology. In particular, we focus on the implementation of quantum-enhanced accelerometers and gyroscopes. We discuss TAI protocols for both spin-dependent and scalar trapping potentials. Using optimal control theory, we demonstrate the splitting of the wave function on a time scale two orders of magnitude shorter than a previous proposal using adiabatic dynamics, thus maximizing the time spent at full separation, where the interferometric phase is accumulated. The performance estimates for TAI give a promising perspective for atom-interferometry-based sensing, significantly exceeding the sensitivities of current state-of-the-art devices.
We propose a tractor atom interferometer (TAI) based on three-dimensional (3D) confinement and transport of split atomic wave-function components in potential wells that follow programmed paths. The paths are programmed to split and recombine atomic wave functions at well-defined space-time points, guaranteeing closure of the interferometer. Uninterrupted 3D confinement of the interfering wave-function components in the tractor wells eliminates coherence loss due to wave-packet dispersion. Using Crank-Nicolson simulation of the time-dependent Schr\"odinger equation, we compute the quantum evolution of scalar and spinor wave functions in several TAI sample scenarios. The interferometric phases extracted from the wave functions allow us to quantify gravimeter sensitivity for the TAI scenarios studied. We show that spinor TAI supports matter-wave beam splitters that are more robust against nonadiabatic effects than their scalar-TAI counterparts. We confirm the validity of semiclassical path-integral phases taken along the programmed paths of the TAI. Aspects for future experimental realizations of TAI are discussed.
Matter-wave interferometry with cold atoms offers a competitive tool for absolute measurements of acceleration and rotation. The sensitivity of atom-interferometric gyroscopes depends on the area enclosed by the interferometer. In this contribution, we present a concept for a rotation sensor, utilizing a multi-loop interferometer geometry to achieve a scalable area while maintaining a compact setup. It enables rotation measurements of a single axis on ground and can be extended to measure rotations along all three spatial axes in microgravity, for potential applications in space missions, Earth observation, and navigation systems.
Matter-wave interferometers show great a potential for improving inertial sensing. The absence of drifts recommends them for a variety of applications in geodesy, navigation, or fundamental physics. Here, ultracold atomic ensembles, featuring a velocity distribution well below the photon recoil velocity, open up new perspectives. In contrast to standard laser cooling methods, they allow to reach better beam-splitting efficiencies and, hence, a higher contrast as well as to reduce systematic uncertainties and biases. Presently, Bose-Einstein condensates (BECs) provide the means to achieve the lowest expansion energies of few picokelvin. Indeed, the momentum distribution of a BEC can be further narrowed after reaching the regime of ballistic expansion, where all mean field energy is converted to kinetic energy, by the application of the delta-kick collimation technique. With such ensembles, Bragg processes can be driven with an efficiency of above 95% as well as Bloch oscillations performed without large atomic losses or dephasing. Both enable efficient large momentum transfer in interferometers to enhance their sensitivity for inertial effects. In a so-called twin-lattice atom interferometers more than thousand photon recoils are used to form compact but sensitive atom interferometers. These methods not only bring in reach extremely accurate gravimeters and accelerometers but also gyroscopes. Like the Sagnac effect in ring laser or fiber gyroscopes, the sensitivity of atom interferometers to rotations increases with the space-time area enclosed by the interferometer. In the case of light interferometers, the latter can be enlarged by forming multiple fiber loops. However, the equivalent for matter-wave interferometers remains an experimental challenge. An atom interferometer with scalable area may be formed in a twin lattice combined with a relaunch mechanism to obtain multi loops as well. Due to this scalability, it offers the perspective of reaching unprecedented sensitivities for rotations in comparably compact sensor head setups. Moreover, atom-chip technologies offer the possibility to generate a BEC and perform delta-kick collimation in a fast and reliable away, paving the way for field-deployable miniaturized atomic devices. Last but not least, the extremely low expansion energies of BECs open up to extend the time atoms spend in the interferometer to tens of seconds. This brings in reach unprecedented sensitivities in space-borne applications such as satellite geodesy.
In this paper, we investigate a design approach of reinforcement learning to engineer a gyroscope in an optical lattice for the inertial sensing of rotations. Our methodology is not based on traditional atom interferometry, that is, splitting, reflecting, and recombining wavefunction components. Instead, the learning agent is assigned the task of generating lattice shaking sequences that optimize the sensitivity of the gyroscope to rotational signals in an end-to-end design philosophy. What results is an interference device that is completely distinct from the familiar Mach-Zehnder-type interferometer. For the same total interrogation time, the end-to-end design leads to a twentyfold improvement in sensitivity over traditional Bragg interferometry. Published by the American Physical Society 2024
We discuss a scheme to implement a gyroscopic atom sensor with magnetically trapped ultra-cold atoms. Unlike standard light or matter wave Sagnac interferometers no free wave propagation is used. Interferometer operation is controlled only with static, radio-frequency and microwave magnetic fields, which removes the need for interferometric stability of optical laser beams. Due to the confinement of atoms, the scheme may allow the construction of small scale portable sensors. We discuss the main elements of the scheme and report on recent results and efforts towards its experimental realization.