Recently, significant progress has been made in the demonstration of single-qutrit and coupled-qutrit gates with superconducting circuits. Coupled-qutrit gates have significantly lower fidelity than single-qutrit gates, owing to long implementation times. We present a protocol to implement the CZ universal gate for two qutrits based on a decomposition involving two partial-state swaps and local operations. The partial-state swaps can be implemented effectively using parametric coupling, which is fast and has the advantage of frequency selectivity. We perform a detailed analysis of this protocol in a system consisting of two fixed-frequency transmons coupled by a flux-tunable transmon. The application of an AC flux in the tunable transmon controls the parametric gates. This protocol has the potential to lead to fast and scalable two-qutrit gates in superconducting circuit architectures.
Recently, significant progress has been made in the demonstration of single-qutrit and coupled-qutrit gates with superconducting circuits. Coupled-qutrit gates have significantly lower fidelity than single-qutrit gates, owing to long implementation times. We present a protocol to implement the CZ universal gate for two qutrits based on a decomposition involving two partial-state swaps and local operations. The partial-state swaps can be implemented effectively using parametric coupling, which is fast and has the advantage of frequency selectivity. We perform a detailed analysis of this protocol in a system consisting of two fixed-frequency transmons coupled by a flux-tunable transmon. The application of an AC flux in the tunable transmon controls the parametric gates. This protocol has the potential to lead to fast and scalable two-qutrit gates in superconducting circuit architectures.
High-performance two-qubit gates have been reported with superconducting qubits coupled via a single-transmon coupler (STC). Most of them are implemented for qubits with a small detuning since reducing residual ZZ coupling for highly detuned qubits by an STC is challenging. In terms of the frequency crowding and crosstalk, however, highly detuned qubits are desirable. Here, we numerically demonstrate a high-performance parametric gate for highly detuned fixed-frequency qubits using a recently proposed tunable coupler called a double-transmon coupler (DTC). Applying an ac flux pulse, we can perform a maximally entangling universal gate (iSWAP) with an average fidelity over 99.99% and a short gate time of about 24 ns. This speed is comparable to resonance-based gates for slightly detuned tunable qubits. Moreover, using a dc flux pulse alternatively, we can achieve another kind of entangling gate called a CZ gate with an average fidelity over 99.99% and a gate time of about 18 ns. Given the flexibility and feasible settings, we can expect that the DTC will contribute towards realizing a high-performance quantum computer in the near future.
Future quantum information processors require tunable coupling architectures that can produce high-fidelity logical gates between two or more qubits. Parametric coupling is a powerful technique for generating tunable interactions between many qubits. Here, we present a highly flexible parametric coupling scheme with superconducting qubits that provides complete removal of residual Z Z coupling and the implementation of driven SWAP or SWAP-free controlled- Z ( C Z ) gates. Our fully integrated two-dimensional on-chip coupler design is only weakly flux tunable, cancels static linear coupling between the qubits, avoids internal coupler dynamics or excitations, and is extensible to multiqubit circuit-QED systems. Exploring gate fidelity versus gate duration allows us to maximize two-qubit gate fidelity, while providing insights into possible error sources for these gates. Randomized benchmarking over several hours reveals that the parametric SWAP C Z gate achieves an average fidelity of 99.44 ± 0.09 % in a gate duration of 70 ns and that a dispersively driven parametric SWAP-free C Z gate attains an average fidelity of 99.47 ± 0.07 % in only 30 ns. The fidelity remained above this value for over 8 h and peaked twice with a maximum of 99.67 ± 0.14 % . Overall, our parametric approach combines versatility, precision, speed, and high performance in one compact coupler design.
Abstract Ternary quantum information processing in superconducting devices poses a promising alternative to its more popular binary counterpart through larger, more connected computational spaces and proposed advantages in quantum simulation and error correction. Although generally operated as qubits, transmons have readily addressable higher levels, making them natural candidates for operation as quantum three-level systems (qutrits). Recent works in transmon devices have realized high fidelity single qutrit operation. Nonetheless, effectively engineering a high-fidelity two-qutrit entanglement remains a central challenge for realizing qutrit processing in a transmon device. In this work, we apply the differential AC Stark shift to implement a flexible, microwave-activated, and dynamic cross-Kerr entanglement between two fixed-frequency transmon qutrits, expanding on work performed for the Z Z interaction with transmon qubits. We then use this interaction to engineer efficient, high-fidelity qutrit CZ † and CZ gates, with estimated process fidelities of 97.3(1)% and 95.2(3)% respectively, a significant step forward for operating qutrits on a multi-transmon device.
Abstract It is advantageous for any quantum processor to support different classes of two-qubit quantum logic gates when compiling quantum circuits, a property that is typically not present in existing platforms. In particular, access to a gate set that includes support for the CZ-, iSWAP-, and SWAP-type families of gates renders conversions between these gate families unnecessary during compilation, as any two-qubit Clifford gate can be executed using at most one two-qubit gate from this set, plus additional single-qubit gates. We experimentally demonstrate that a SWAP gate can be decomposed into one iSWAP gate followed by one CZ gate, affirming a more efficient compilation strategy over the conventional approach that relies on three iSWAP or three CZ gates to replace a SWAP gate. Our implementation makes use of a superconducting quantum processor design based on fixed-frequency transmon qubits coupled together by a parametrically modulated tunable transmon coupler, extending this platform’s native gate set so that any two-qubit Clifford unitary matrix can be realized using no more than two two-qubit gates and single-qubit gates.
Qutrits offer the potential for enhanced quantum computation by exploiting an enlarged Hilbert space. However, the synthesis of high-fidelity and fast qutrit gates, particularly for single qutrits, remains an ongoing challenge, as it involves overcoming intrinsic constraints in quantum platforms. Here, we develop a novel framework for the efficient implementation of a single-qutrit gate set via coherent control, leveraging SU(3) dynamics while obviating platform-specific constraints such as those arising from the selection rule. As a proof-of-principle demonstration, we realize 35-ns qutrit hadamard and x gates using a superconducting transmon, achieving an average fidelity of 99.5%, as verified by randomized benchmarking. We further demonstrate two paradigmatic quantum circuits, which can be naturally extended to scalable qudit algorithms for phase estimation and parity check. In addition, we propose an SU(3)-based decomposition strategy for an arbitrary single-qutrit gate and numerically demonstrate its substantial efficiency improvement over conventional SU(2)-based protocols. By addressing the challenge of efficiently implementing single-qutrit gates, our protocol paves the way for realizing high-performance qutrit processors in diverse quantum platforms.
Gate-based quantum computation has been extensively investigated using quantum circuits based on qubits. In many cases, such qubits are actually made out of multilevel systems but with only two states being used for computational purpose. While such a strategy has the advantage of being in line with the common binary logic, it in some sense wastes the ready-for-use resources in the large Hilbert space of these intrinsic multidimensional systems. Quantum computation beyond qubits (e.g., using qutrits or qudits) has thus been discussed and argued to be more efficient than its qubit counterpart in certain scenarios. However, one of the essential elements for qutrit-based quantum computation, two-qutrit quantum gate, remains a major challenge. In this Letter, we propose and demonstrate a highly efficient and scalable two-qutrit quantum gate in superconducting quantum circuits. Using a tunable coupler to control the cross-Kerr coupling between two qutrits, our scheme realizes a two-qutrit conditional phase gate with fidelity 89.3% by combining simple pulses applied to the coupler with single-qutrit operations. We further use such a two-qutrit gate to prepare an EPR state of two qutrits with a fidelity of 95.5%. Our scheme takes advantage of a tunable qutrit-qutrit coupling with a large on:off ratio. It therefore offers both high efficiency and low crosstalk between qutrits, thus being friendly for scaling up. Our Letter constitutes an important step toward scalable qutrit-based quantum computation.