Semiconductor quantum dots are favorable candidates for quantum information processing due to their long coherence time and potential scalability. However, the calibration and characterization of interconnected quantum dot arrays have proven to be challenging tasks. One method to characterize the configuration of such an array involves using the Hubbard model. In this paper, we present an automated characterization algorithm that efficiently extracts the Hubbard model parameters, including tunnel coupling and capacitive coupling energy, from experimental stability diagrams. Leveraging the dual annealing optimizer, we determine the set of Hubbard parameters that best characterize the experimental data. We compare our method with an alternate, well-established measure of the tunnel coupling and find good agreement within the investigated regime. Our extracted tunnel couplings range from 69 to 517 $μ$eV, and we discuss the limiting factors of our method.
Semiconductor quantum dots are favorable candidates for quantum information processing due to their long coherence time and potential scalability. However, the calibration and characterization of interconnected quantum dot arrays have proven to be challenging tasks. One method to characterize the configuration of such an array involves using the Hubbard model. In this paper, we present an automated characterization algorithm that efficiently extracts the Hubbard model parameters, including tunnel coupling and capacitive coupling energy, from experimental stability diagrams. Leveraging the dual annealing optimizer, we determine the set of Hubbard parameters that best characterize the experimental data. We compare our method with an alternate, well-established measure of the tunnel coupling and find good agreement within the investigated regime. Our extracted tunnel couplings range from 69 to 517 μeV, and we discuss the limiting factors of our method.
Semiconductor quantum dots are favorable candidates for quantum information processing due to their long coherence time and potential scalability. However, the calibration and characterization of interconnected quantum dot arrays have proven to be challenging tasks. One method to characterize the configuration of such an array involves using the Hubbard model. In this paper, we present an efficient characterization algorithm that efficiently extracts the Hubbard model parameters, including tunnel coupling and capacitive coupling energy, from experimental stability diagrams. Leveraging the dual-annealing optimizer, we determine the set of Hubbard parameters that best characterize the experimental data. We compare our method with an alternate, well-established measure of tunnel coupling and find good agreement within the investigated regime. Our extracted tunnel couplings range from 69 to 517 μeV, and we discuss the limiting factors of our method.
Semiconductor quantum dot arrays defined electrostatically in a 2D electron gas provide a scalable platform for quantum information processing and quantum simulations. For the operation of quantum dot arrays, appropriate voltages need to be applied to the gate electrodes that define the quantum dot potential landscape. Tuning the gate voltages has proven to be a time-consuming task, because of initial electrostatic disorder and capacitive cross-talk effects. Here, we report on the automated tuning of the inter-dot tunnel coupling in gate-defined semiconductor double quantum dots. The automation of the tuning of the inter-dot tunnel coupling is the next step forward in scalable and efficient control of larger quantum dot arrays. This work greatly reduces the effort of tuning semiconductor quantum dots for quantum information processing and quantum simulation.
We present efficient methods to reliably characterize and tune gate-defined semiconductor spin qubits. Our methods are developed for double quantum dots in GaAs heterostructures, but they can easily be adapted to other quantum-dot-based qubit systems. These tuning procedures include the characterization of the interdot tunnel coupling, the tunnel coupling to the surrounding leads, and the identification of various fast initialization points for the operation of the qubit. Since semiconductor-based spin qubits are compatible with standard semiconductor process technology and hence promise good prospects of scalability, the challenge of efficiently tuning the dot’s parameters will only grow in the near future, once the multiqubit stage is reached. With the anticipation of being used as the basis for future automated tuning protocols, all measurements presented here are fast-to-execute and easy-to-analyze characterization methods. They result in quantitative measures of the relevant qubit parameters within a couple of seconds and require almost no human interference.
Spin qubits in quantum dots are a compelling platform for fault-tolerant quantum computing due to the potential to fabricate dense two-dimensional arrays with nearest neighbour couplings, a requirement to implement the surface code. However, due to the proximity of the surface gate electrodes, cross-coupling capacitances can be substantial, making it difficult to control each quantum dot independently. Increasing the number of quantum dots increases the complexity of the calibration process, which becomes impractical to do heuristically. Inspired by recent demonstrations of industrial-grade silicon quantum dot bilinear arrays, we develop a theoretical framework to mitigate the effect of cross-capacitances in 2x2 arrays of quantum dots and extend it to 2xN and NxN arrays. The method is based on extracting the gradients in gate-voltage space of different charge transitions in multiple two-dimensional charge stability diagrams to determine the system's virtual gates. To automate the process, we train an ensemble of regression models to extract the gradients from a Hough transformation of charge stability diagrams and validate the algorithm on simulated and experimental data of a 2x2 quantum dot array. Our method provides a completely automated tool to mitigate cross-capacitance effects in arrays of QDs which could be utilised to study variability in device electrostatics across large arrays.
As quantum dot (QD)-based spin qubits advance toward larger, more complex device architectures, rapid, automated device characterization and data analysis tools become critical. The orientation and spacing of transition lines in a charge stability diagram (CSD) contain a fingerprint of a QD device's capacitive environment, making these measurements useful tools for device characterization. However, manually interpreting these features is time-consuming, error-prone, and impractical at scale. Here, we present an automated protocol for extracting underlying capacitive properties from CSDs. Our method integrates machine learning, image processing, and object detection to identify and track charge transitions across large datasets without manual labeling. We demonstrate this method using experimentally measured data from a strained-germanium single-quantum-well (planar) and a strained-germanium double-quantum-well (bilayer) QD device. Unlike for planar QD devices, CSDs in bilayer germanium heterostructure exhibit a larger set of transitions, including interlayer tunneling and distinct loading lines for the vertically stacked QDs, making them a powerful testbed for automation methods. By analyzing the properties of many CSDs, we can statistically estimate physically relevant quantities, like relative lever arms and capacitive couplings. Thus, our protocol enables rapid extraction of useful, nontrivial information about QD devices.
Abstract Recent progress in building large-scale quantum devices for exploring quantum computing and simulation has relied upon effective tools for achieving and maintaining good experimental parameters, i.e., tuning up devices. In many cases, including quantum dot-based architectures, the parameter space grows substantially with the number of qubits, and may become a limit to scalability. Fortunately, machine learning techniques for pattern recognition and image classification, using so-called deep neural networks, have shown surprising successes for computer-aided understanding of complex systems. We propose a new paradigm for fully automated experimental initialization through a closed-loop system relying on machine learning and optimization techniques. We use deep convolutional neural networks to characterize states and charge configurations of semiconductor quantum dot arrays when only measurements of a current−voltage characteristic of transport are available. For simplicity, we model a semiconductor nanowire connected to leads and capacitively coupled to depletion gates using the Thomas−Fermi approximation and Coulomb blockade physics. We then generate labeled training data for the neural networks, and find at least 90 % accuracy for charge and state identification for single and double dots. Using these characterization networks, we can then optimize the parameter space to achieve a desired configuration of the array, a technique we call “auto-tuning”. Finally, we show how such techniques can be implemented in an experimental setting by applying our approach to an experimental dataset, and outline further problems in this domain, from using charge sensing data to extensions to full one- and two-dimensional arrays, that can be tackled with machine learning.