Fock states with a well-defined number of photons in an oscillator have shown a wide range of applications in quantum information science. Nonetheless, their usefulness has been marred by single and multiphoton losses due to unavoidable environment-induced dissipation. Though several dissipation engineering methods have been developed to counteract the leading single-photon-loss error, averting multiple-photon losses remains elusive. Here, we experimentally demonstrate a dissipation engineering method that autonomously stabilizes multiphoton Fock states against losses of multiple photons using a cascaded selective photon-addition operation in a superconducting quantum circuit. Through measuring the photon-number populations and Wigner tomography of the oscillator states, we observe a prolonged preservation of nonclassical Wigner negativities for the stabilized Fock states |N⟩ with N=1, 2, 3 for a duration of about 10 ms. Furthermore, the dissipation engineering method demonstrated here also facilitates the implementation of a nonunitary operation for resetting a binomially encoded logical qubit. These results highlight potential applications in error-correctable quantum information processing against multiple-photon-loss errors.
Fock states with a well-defined number of photons in an oscillator have shown a wide range of applications in quantum information science. Nonetheless, their usefulness has been marred by single and multiphoton losses due to unavoidable environment-induced dissipation. Though several dissipation engineering methods have been developed to counteract the leading single-photon-loss error, averting multiple-photon losses remains elusive. Here, we experimentally demonstrate a dissipation engineering method that autonomously stabilizes multiphoton Fock states against losses of multiple photons using a cascaded selective photon-addition operation in a superconducting quantum circuit. Through measuring the photon-number populations and Wigner tomography of the oscillator states, we observe a prolonged preservation of nonclassical Wigner negativities for the stabilized Fock states |N⟩ with N=1, 2, 3 for a duration of about 10 ms. Furthermore, the dissipation engineering method demonstrated here also facilitates the implementation of a nonunitary operation for resetting a binomially encoded logical qubit. These results highlight potential applications in error-correctable quantum information processing against multiple-photon-loss errors.
Abstract To build a universal quantum computer from fragile physical qubits, effective implementation of quantum error correction (QEC)1 is an essential requirement and a central challenge. Existing demonstrations of QEC are based on an active schedule of error-syndrome measurements and adaptive recovery operations2, 3, 4, 5, 6, 7 that are hardware intensive and prone to introducing and propagating errors. In principle, QEC can be realized autonomously and continuously by tailoring dissipation within the quantum system1, 8, 9, 10, 11, 12, 13, 14, but so far it has remained challenging to achieve the specific form of dissipation required to counter the most prominent errors in a physical platform. Here we encode a logical qubit in Schrödinger cat-like multiphoton states15 of a superconducting cavity, and demonstrate a corrective dissipation process that stabilizes an error-syndrome operator: the photon number parity. Implemented with continuous-wave control fields only, this passive protocol protects the quantum information by autonomously correcting single-photon-loss errors and boosts the coherence time of the bosonic qubit by over a factor of two. Notably, QEC is realized in a modest hardware setup with neither high-fidelity readout nor fast digital feedback, in contrast to the technological sophistication required for prior QEC demonstrations. Compatible with additional phase-stabilization and fault-tolerant techniques16, 17, 18, our experiment suggests quantum dissipation engineering as a resource-efficient alternative or supplement to active QEC in future quantum computing architectures.
Quantum error correction (QEC) is essential for practical quantum computation, but conventional approaches require large numbers of physical qubits per logical qubit, imposing severe hardware overhead. Noise-biased qubits, in which one error type dominates over the others, offer a route to reducing this overhead by enabling tailored QEC codes that exploit the error asymmetry. This work demonstrates, through two separate experiments, that combining Hamiltonian and dissipation engineering provides a versatile framework for enhancing the noise-bias of superconducting qubits. In the first experiment, we focus on the Kerr-cat qubit (KCQ), a noise-biased qubit encoded in the degenerate eigenstates of a two-photon driven Kerr oscillator, and study leakage outside the KCQ manifold, a key limitation of this system. We apply microwave pulses to selectively address the leakage states and to perform the first direct measurement of their population. We find a leakage population exceeding 9 %, consistent with substantial quantum heating and twelve times larger than the thermal excited-state population of the undriven oscillator. To reduce it, we introduce frequency-selective engineered single-photon dissipation. We show that this suppresses the leakage and extends the bit-flip time to 3.6 ms, while leaving the phase-flip time unchanged and reaching a qubit noise bias of 1400. In the second experiment, we introduce the gain-engineered transmon: a qubit encoded in the |g⟩ and |f⟩ levels of a standard transmon, in which a frequency-selective engineered single-photon-gain channel on the |e⟩ ↔ |f⟩ transition autonomously corrects single-photon loss errors. We demonstrate a factor-of-17 enhancement of the relaxation time, at the cost of only a 2.1 reduction in echo coherence time, while maintaining single-qubit gate errors below 0.5 %. Numerical simulations further show that the gain-engineered transmon can serve as a noisebiased ancilla for fault-tolerant error detection, suppressing both the ancilla detection infidelity and the error backaction below those of a standard |g⟩ ↔ |e⟩ ancilla qubit. These results establish the combination of Hamiltonian and dissipation engineering as a practical strategy for protecting quantum information. Because our architectures build on standard superconducting circuits, they integrate easily into existing platforms. We envision that steady improvements to noise-biased qubits, such as those developed in this thesis, could allow them to replace the transmon as the building block of superconducting quantum processors, lowering the hardware overhead of fault-tolerant quantum computation. Beyond quantum information processing, the driven nonlinear oscillators discussed in this thesis may serve as analog simulators of complex quantum dynamics, and as platforms for studying fundamental effects in driven-dissipative systems.
We show that a Kerr-nonlinear cavity coupled to an incoherently pumped two-level qubit can stabilize a nonclassical steady state with pronounced Wigner negativity. Without the qubit, two-photon drive and dissipation preserve photon-number parity and confine vacuum-initiated dynamics to the even-parity Fock subspace, preventing the emergence of odd-parity-induced central Wigner negativity. The qubit opens a frequency-selective injection channel into the odd-parity Fock subspace, while Kerr nonlinearity suppresses unwanted higher-order transitions, driving the system toward a steady state dominated by the single-photon Fock state that can approach a nearly pure state in the optimal regime. The resulting Wigner negativity remains robust over broad experimentally relevant loss and dephasing regimes, providing a route to the dissipative stabilization of nonclassical light in cavity quantum electrodynamics platforms.
Abstract Historically, noise in superconducting circuits has been considered an obstacle to be removed. A large fraction of the research effort in designing superconducting circuits has focused on noise reduction, with great success, as coherence times have increased by four orders of magnitude in the past two decades. However, noise and dissipation can never be fully eliminated, and further, a rapidly growing body of theoretical and experimental work has shown that carefully tuned noise, in the form of engineered dissipation, can be a profoundly useful tool in designing and operating quantum circuits. In this article, I review important applications of engineered dissipation, including state generation, state stabilization, and autonomous quantum error correction, where engineered dissipation can mitigate the effect of intrinsic noise, reducing logical error rates in quantum information processing. Further, I provide a pedagogical review of the basic noise processes in superconducting qubits (photon loss and phase noise), and argue that any dissipative mechanism which can correct photon loss errors is very likely to automatically suppress dephasing. I also discuss applications for quantum simulation, and possible future research directions.
Quantum states can be stabilized in the presence of intrinsic and environmental losses by either applying an active feedback condition on an ancillary system or through reservoir engineering. Reservoir engineering maintains a desired quantum state through a combination of drives and designed entropy evacuation. We propose and implement a quantum-reservoir engineering protocol that stabilizes Fock states in a microwave cavity. This protocol is realized with a circuit quantum electrodynamics platform where a Josephson junction provides direct, nonlinear coupling between two superconducting waveguide cavities. The nonlinear coupling results in a single-photon-resolved cross-Kerr effect between the two cavities enabling a photon-number-dependent coupling to a lossy environment. The quantum state of the microwave cavity is discussed in terms of a net polarization and is analyzed by a measurement of its steady state Wigner function.
Abstract Bosonic quantum error correcting codes are primarily designed to protect against single-photon loss. To correct for this type of error, one can encode the logical qubit in code spaces with a definite photon parity, such as cat codes or binomial codes. Error correction requires a recovery operation that maps the error states—which have opposite parity—back onto the code space. Here, we realize a collection of photon-number-selective, simultaneous photon addition operations on a bosonic mode, a microwave cavity, assisted by a superconducting qubit. These operations are implemented as two-photon transitions that excite the cavity and the qubit at the same time. The additional degree of freedom of the qubit makes it possible to implement a coherent, unidirectional mapping between spaces of opposite photon parity. We present the successful experimental implementation of the drives and the phase control they enable on superpositions of Fock states. The presented technique, when supplemented with qubit reset, is suitable for autonomous quantum error correction in bosonic systems and, more generally, opens the possibility to realize a range of non-unitary transformations on a bosonic mode.