Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1708.02559 · Quantum Science and Technology

The upside of noise: engineered dissipation as a resource in superconducting circuits

Eliot Kapit

Published Aug 2, 2017• 61 citations
arXivHTMLPDF

Abstract

Abstract Historically, noise in superconducting circuits has been considered an obstacle to be removed. A large fraction of the research effort in designing superconducting circuits has focused on noise reduction, with great success, as coherence times have increased by four orders of magnitude in the past two decades. However, noise and dissipation can never be fully eliminated, and further, a rapidly growing body of theoretical and experimental work has shown that carefully tuned noise, in the form of engineered dissipation, can be a profoundly useful tool in designing and operating quantum circuits. In this article, I review important applications of engineered dissipation, including state generation, state stabilization, and autonomous quantum error correction, where engineered dissipation can mitigate the effect of intrinsic noise, reducing logical error rates in quantum information processing. Further, I provide a pedagogical review of the basic noise processes in superconducting qubits (photon loss and phase noise), and argue that any dissipative mechanism which can correct photon loss errors is very likely to automatically suppress dephasing. I also discuss applications for quantum simulation, and possible future research directions.

DOI
10.1088/2058-9565/aa7e5d

Related papers

Superconducting Circuits for Quantum Information: An Outlook

Michel Devoret, Robert J. Schoelkopf

The performance of superconducting qubits has improved by several orders of magnitude in the past decade. These circuits benefit from the robustness of superconductivity and the Josephson effect, and at present they have not encountered any hard physical limits. However, building an error-corrected information processor with many such qubits will require solving specific architecture problems that constitute a new field of research. For the first time, physicists will have to master quantum error correction to design and operate complex active systems that are dissipative in nature, yet remain coherent indefinitely. We offer a view on some directions for the field and speculate on its future.

Science•Mar 7, 2013•2,117 citations

Combining Hamiltonian and Dissipation Engineering in Superconducting Circuits to Realize Noise-Biased Qubits

Francesco Adinolfi

Quantum error correction (QEC) is essential for practical quantum computation, but conventional approaches require large numbers of physical qubits per logical qubit, imposing severe hardware overhead. Noise-biased qubits, in which one error type dominates over the others, offer a route to reducing this overhead by enabling tailored QEC codes that exploit the error asymmetry. This work demonstrates, through two separate experiments, that combining Hamiltonian and dissipation engineering provides a versatile framework for enhancing the noise-bias of superconducting qubits. In the first experiment, we focus on the Kerr-cat qubit (KCQ), a noise-biased qubit encoded in the degenerate eigenstates of a two-photon driven Kerr oscillator, and study leakage outside the KCQ manifold, a key limitation of this system. We apply microwave pulses to selectively address the leakage states and to perform the first direct measurement of their population. We find a leakage population exceeding 9 %, consistent with substantial quantum heating and twelve times larger than the thermal excited-state population of the undriven oscillator. To reduce it, we introduce frequency-selective engineered single-photon dissipation. We show that this suppresses the leakage and extends the bit-flip time to 3.6 ms, while leaving the phase-flip time unchanged and reaching a qubit noise bias of 1400. In the second experiment, we introduce the gain-engineered transmon: a qubit encoded in the |g⟩ and |f⟩ levels of a standard transmon, in which a frequency-selective engineered single-photon-gain channel on the |e⟩ ↔ |f⟩ transition autonomously corrects single-photon loss errors. We demonstrate a factor-of-17 enhancement of the relaxation time, at the cost of only a 2.1 reduction in echo coherence time, while maintaining single-qubit gate errors below 0.5 %. Numerical simulations further show that the gain-engineered transmon can serve as a noisebiased ancilla for fault-tolerant error detection, suppressing both the ancilla detection infidelity and the error backaction below those of a standard |g⟩ ↔ |e⟩ ancilla qubit. These results establish the combination of Hamiltonian and dissipation engineering as a practical strategy for protecting quantum information. Because our architectures build on standard superconducting circuits, they integrate easily into existing platforms. We envision that steady improvements to noise-biased qubits, such as those developed in this thesis, could allow them to replace the transmon as the building block of superconducting quantum processors, lowering the hardware overhead of fault-tolerant quantum computation. Beyond quantum information processing, the driven nonlinear oscillators discussed in this thesis may serve as analog simulators of complex quantum dynamics, and as platforms for studying fundamental effects in driven-dissipative systems.

•Jan 1, 2026•0 citations

Engineering Dissipation to Generate Entanglement Between Remote Superconducting Quantum Bits

Mollie E. Schwartz

Superconducting quantum circuits provide a promising avenue for scalable quantum computation and simulation. Their chief advantage is that, unlike physical atoms or electrons, these ``artificial atoms'' can be designed with nearly-arbitrarily large coupling to one another and to their electromagnetic environment. This strong coupling allows for fast quantum bit (qubit) operations, and for efficient readout. However, strong coupling comes at a price: a qubit that is strongly coupled to its environment is also strongly susceptible to losses and dissipation, as coherent information leaks from the quantum system under study into inaccessible ``bath'' modes. Extensive work in the field is dedicated to engineering away these losses to the extent possible, and to using error correction to undo the effects of losses that are unavoidable.This dissertation explores an alternate approach to dissipation: we study avenues by which dissipation itself can be used to generate, rather than destroy, quantum resources. We do so specifically in the context of quantum entanglement, one of the most important and most counter-intuitive aspects of quantum mechanics. Entanglement generation and stabilization is critical to most non-trivial implementations of quantum computing and quantum simulation, as it is the property that distinguishes a multi-qubit quantum system from a string of classical bits. The ability to harness dissipation to generate, purify, and stabilize entanglement is therefore highly desirable.We begin with an overview of quantum dissipation and measurement, followed by an introduction to entanglement and to the superconducting quantum information architecture. We then discuss three sets of experiments that highlight and explore the powerful uses of dissipation in quantum systems. First, we use an entangling measurement to probabilistically generate entanglement between two qubits separated by more than one meter of ordinary cable. This represents the first achievement of remote entanglement in a superconducting qubit system, which will be a critical capability as quantum computers and simulators scale. We then use a nearly-quantum limited amplifier to unravel individual quantum trajectories of the system under that entangling measurement, performing the first systematic exploration of entangled trajectories in any physical implementation. We finally demonstrate deterministic entanglement by engineering a lossy quantum environment to efficiently generate and stabilize entangled states with both frequency and symmetry selectivity. These experiments provide evidence that explicitly building dissipation into an engineered quantum system can enable, rather than hinder, the study of fundamental quantum mechanics and complex many-body Hamiltonians.

•Jan 1, 2016•0 citations

Hardware-Efficient and Fully Autonomous Quantum Error Correction in Superconducting Circuits

Eliot Kapit

Superconducting qubits are among the most promising platforms for building a quantum computer. However, individual qubit coherence times are not far past the scalability threshold for quantum error correction, meaning that millions of physical devices would be required to construct a useful quantum computer. Consequently, further increases in coherence time are very desirable. In this Letter, we blueprint a simple circuit consisting of two transmon qubits and two additional lossy qubits or resonators, which is passively protected against all single-qubit quantum error channels through a combination of continuous driving and engineered dissipation. Photon losses are rapidly corrected through two-photon drive fields implemented with driven superconducting quantum interference device couplings, and dephasing from random potential fluctuations is heavily suppressed by the drive fields used to implement the multiqubit Hamiltonian. Comparing our theoretical model to published noise estimates from recent experiments on flux and transmon qubits, we find that logical state coherence could be improved by a factor of 40 or more compared to the individual qubit T_{1} and T_{2} using this technique. We thus demonstrate that there is substantial headroom for improving the coherence of modern superconducting qubits with a fairly modest increase in device complexity.

arXiv:1510.06117•Physical Review Letters•Apr 12, 2016•80 citations

Hybrid quantum error correction in qubit architectures

Lasse Bjørn Kristensen, Morten Kjærgaard, Christian Kraglund Andersen +1 more

Noise and errors are inevitable parts of any practical implementation of a quantum computer. As a result, large-scale quantum computation will require ways to detect and correct errors in quantum information. Here we present such a quantum error-correcting scheme for correcting the dominant phase and decay errors in superconducting qubit architectures using a hybrid approach combining autonomous correction based on engineered dissipation with traditional measurement-based quantum error correction. Using numerical simulations with realistic device parameters for superconducting circuits, we show that this scheme can achieve a five- to tenfold increase in storage time while using only six qubits for the encoding and two ancillary qubits for the operation of the autonomous correction, providing a potentially large reduction of qubit overhead compared to typical measurement-based error-correction schemes. Furthermore, the scheme relies on standard interactions and qubit driving available in most major quantum computing platforms, making it implementable in a wide range of architectures.

arXiv:1909.09112•Physical Review A•Aug 3, 2023•5 citations

Engineering Dissipation with Resistive Elements in Circuit Quantum Electrodynamics

Marco Cattaneo, Gheorghe Sorin Paraoanu

Abstract The importance of dissipation engineering ranges from universal quantum computation to non‐equilibrium quantum thermodynamics. In recent years, more and more theoretical and experimental studies have shown the relevance of this topic for circuit quantum electrodynamics, one of the major platforms in the race for a quantum computer. This article discusses how to simulate thermal baths by inserting resistive elements in networks of superconducting qubits. Apart from pedagogically reviewing the phenomenological and microscopic models of a resistor as thermal bath with Johnson–Nyquist noise, the paper introduces some new results in the weak coupling limit, showing that the most common examples of open quantum systems can be simulated through capacitively coupled superconducting qubits and resistors. The aim of the manuscript, written with a broad audience in mind, is to be both an instructive tutorial about how to derive and characterize the Hamiltonian of general dissipative superconducting circuits with capacitive coupling, and a review of the most relevant and topical theoretical and experimental works focused on resistive elements and dissipation engineering.

arXiv:2103.16946•Advanced Quantum Technologies•Sep 24, 2021•38 citations
Abstract Historically, noise in superconducting circuits has been considered an obstacle to be removed. A large fraction of the research effort in designing superconducting circuits has focused on noise reduction, with great success, as coherence times have increased by four orders of magnitude in the past two decades. However, noise and dissipation can never be fully eliminated, and further, a rapidly growing body of theoretical and experimental work has shown that carefully tuned noise, in the form of engineered dissipation, can be a profoundly useful tool in designing and operating quantum circuits. In this article, I review important applications of engineered dissipation, including state generation, state stabilization, and autonomous quantum error correction, where engineered dissipation can mitigate the effect of intrinsic noise, reducing logical error rates in quantum information processing. Further, I provide a pedagogical review of the basic noise processes in superconducting qubits (photon loss and phase noise), and argue that any dissipative mechanism which can correct photon loss errors is very likely to automatically suppress dephasing. I also discuss applications for quantum simulation, and possible future research directions.
The performance of superconducting qubits has improved by several orders of magnitude in the past decade. These circuits benefit from the robustness of superconductivity and the Josephson effect, and at present they have not encountered any hard physical limits. However, building an error-corrected information processor with many such qubits will require solving specific architecture problems that constitute a new field of research. For the first time, physicists will have to master quantum error correction to design and operate complex active systems that are dissipative in nature, yet remain coherent indefinitely. We offer a view on some directions for the field and speculate on its future.
Quantum error correction (QEC) is essential for practical quantum computation, but conventional approaches require large numbers of physical qubits per logical qubit, imposing severe hardware overhead. Noise-biased qubits, in which one error type dominates over the others, offer a route to reducing this overhead by enabling tailored QEC codes that exploit the error asymmetry. This work demonstrates, through two separate experiments, that combining Hamiltonian and dissipation engineering provides a versatile framework for enhancing the noise-bias of superconducting qubits. In the first experiment, we focus on the Kerr-cat qubit (KCQ), a noise-biased qubit encoded in the degenerate eigenstates of a two-photon driven Kerr oscillator, and study leakage outside the KCQ manifold, a key limitation of this system. We apply microwave pulses to selectively address the leakage states and to perform the first direct measurement of their population. We find a leakage population exceeding 9 %, consistent with substantial quantum heating and twelve times larger than the thermal excited-state population of the undriven oscillator. To reduce it, we introduce frequency-selective engineered single-photon dissipation. We show that this suppresses the leakage and extends the bit-flip time to 3.6 ms, while leaving the phase-flip time unchanged and reaching a qubit noise bias of 1400. In the second experiment, we introduce the gain-engineered transmon: a qubit encoded in the |g⟩ and |f⟩ levels of a standard transmon, in which a frequency-selective engineered single-photon-gain channel on the |e⟩ ↔ |f⟩ transition autonomously corrects single-photon loss errors. We demonstrate a factor-of-17 enhancement of the relaxation time, at the cost of only a 2.1 reduction in echo coherence time, while maintaining single-qubit gate errors below 0.5 %. Numerical simulations further show that the gain-engineered transmon can serve as a noisebiased ancilla for fault-tolerant error detection, suppressing both the ancilla detection infidelity and the error backaction below those of a standard |g⟩ ↔ |e⟩ ancilla qubit. These results establish the combination of Hamiltonian and dissipation engineering as a practical strategy for protecting quantum information. Because our architectures build on standard superconducting circuits, they integrate easily into existing platforms. We envision that steady improvements to noise-biased qubits, such as those developed in this thesis, could allow them to replace the transmon as the building block of superconducting quantum processors, lowering the hardware overhead of fault-tolerant quantum computation. Beyond quantum information processing, the driven nonlinear oscillators discussed in this thesis may serve as analog simulators of complex quantum dynamics, and as platforms for studying fundamental effects in driven-dissipative systems.
Superconducting quantum circuits provide a promising avenue for scalable quantum computation and simulation. Their chief advantage is that, unlike physical atoms or electrons, these ``artificial atoms'' can be designed with nearly-arbitrarily large coupling to one another and to their electromagnetic environment. This strong coupling allows for fast quantum bit (qubit) operations, and for efficient readout. However, strong coupling comes at a price: a qubit that is strongly coupled to its environment is also strongly susceptible to losses and dissipation, as coherent information leaks from the quantum system under study into inaccessible ``bath'' modes. Extensive work in the field is dedicated to engineering away these losses to the extent possible, and to using error correction to undo the effects of losses that are unavoidable.This dissertation explores an alternate approach to dissipation: we study avenues by which dissipation itself can be used to generate, rather than destroy, quantum resources. We do so specifically in the context of quantum entanglement, one of the most important and most counter-intuitive aspects of quantum mechanics. Entanglement generation and stabilization is critical to most non-trivial implementations of quantum computing and quantum simulation, as it is the property that distinguishes a multi-qubit quantum system from a string of classical bits. The ability to harness dissipation to generate, purify, and stabilize entanglement is therefore highly desirable.We begin with an overview of quantum dissipation and measurement, followed by an introduction to entanglement and to the superconducting quantum information architecture. We then discuss three sets of experiments that highlight and explore the powerful uses of dissipation in quantum systems. First, we use an entangling measurement to probabilistically generate entanglement between two qubits separated by more than one meter of ordinary cable. This represents the first achievement of remote entanglement in a superconducting qubit system, which will be a critical capability as quantum computers and simulators scale. We then use a nearly-quantum limited amplifier to unravel individual quantum trajectories of the system under that entangling measurement, performing the first systematic exploration of entangled trajectories in any physical implementation. We finally demonstrate deterministic entanglement by engineering a lossy quantum environment to efficiently generate and stabilize entangled states with both frequency and symmetry selectivity. These experiments provide evidence that explicitly building dissipation into an engineered quantum system can enable, rather than hinder, the study of fundamental quantum mechanics and complex many-body Hamiltonians.
Superconducting qubits are among the most promising platforms for building a quantum computer. However, individual qubit coherence times are not far past the scalability threshold for quantum error correction, meaning that millions of physical devices would be required to construct a useful quantum computer. Consequently, further increases in coherence time are very desirable. In this Letter, we blueprint a simple circuit consisting of two transmon qubits and two additional lossy qubits or resonators, which is passively protected against all single-qubit quantum error channels through a combination of continuous driving and engineered dissipation. Photon losses are rapidly corrected through two-photon drive fields implemented with driven superconducting quantum interference device couplings, and dephasing from random potential fluctuations is heavily suppressed by the drive fields used to implement the multiqubit Hamiltonian. Comparing our theoretical model to published noise estimates from recent experiments on flux and transmon qubits, we find that logical state coherence could be improved by a factor of 40 or more compared to the individual qubit T_{1} and T_{2} using this technique. We thus demonstrate that there is substantial headroom for improving the coherence of modern superconducting qubits with a fairly modest increase in device complexity.
Noise and errors are inevitable parts of any practical implementation of a quantum computer. As a result, large-scale quantum computation will require ways to detect and correct errors in quantum information. Here we present such a quantum error-correcting scheme for correcting the dominant phase and decay errors in superconducting qubit architectures using a hybrid approach combining autonomous correction based on engineered dissipation with traditional measurement-based quantum error correction. Using numerical simulations with realistic device parameters for superconducting circuits, we show that this scheme can achieve a five- to tenfold increase in storage time while using only six qubits for the encoding and two ancillary qubits for the operation of the autonomous correction, providing a potentially large reduction of qubit overhead compared to typical measurement-based error-correction schemes. Furthermore, the scheme relies on standard interactions and qubit driving available in most major quantum computing platforms, making it implementable in a wide range of architectures.
Abstract The importance of dissipation engineering ranges from universal quantum computation to non‐equilibrium quantum thermodynamics. In recent years, more and more theoretical and experimental studies have shown the relevance of this topic for circuit quantum electrodynamics, one of the major platforms in the race for a quantum computer. This article discusses how to simulate thermal baths by inserting resistive elements in networks of superconducting qubits. Apart from pedagogically reviewing the phenomenological and microscopic models of a resistor as thermal bath with Johnson–Nyquist noise, the paper introduces some new results in the weak coupling limit, showing that the most common examples of open quantum systems can be simulated through capacitively coupled superconducting qubits and resistors. The aim of the manuscript, written with a broad audience in mind, is to be both an instructive tutorial about how to derive and characterize the Hamiltonian of general dissipative superconducting circuits with capacitive coupling, and a review of the most relevant and topical theoretical and experimental works focused on resistive elements and dissipation engineering.