© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:2307.10785 · Physical Review Applied

Object detection and range finding with quantum states using simple detection

Richard J. Murchie, Jonathan D. Pritchard, John Jeffers

Published Jun 5, 2024• 5 citations

Abstract

The task of sensing the presence of a target object using a weak light source is challenging when the object is embedded in a noisy environment. One possibility is to use quantum illumination to do this, as it can outperform classical illumination in determining the object presence and range. This advantage persists even when both classical and quantum illumination are restricted to identical suboptimal object-detection measurements based on nonsimultaneous, phase-insensitive coincidence counts. Motivated by realistic experimental protocols, we present a theoretical framework for analyzing coincident multishot data with simple detectors. This approach allows for the often-overlooked noncoincidence data to be included, as well as providing a calibration-free threshold for inferring an object’s presence and range, enabling a fair comparison between different detection regimes. Our results quantify the advantage of quantum over classical illumination when performing target discrimination in a noisy thermal environment, including estimating the number of shots required to detect a target with a given confidence level. Published by the American Physical Society 2024

DOI: 10.1103/physrevapplied.21.064008

Related papers

Optimization of direct-detection quantum illumination

Thomas Brougham, John Jeffers

Quantum illumination uses quantum correlations to improve the detection of objects in the presence of background noise. A simple and common practical approach to quantum illumination is to use threshold detectors to measure the idler mode. We investigate the optimization of these protocols. Surprisingly, we find that there can be an advantage to having a signal detector whose quantum efficiency is significantly less than perfect, one that does not vanish for low object reflectivities or signal strengths. We also show that decreasing the separation between pulses, while keeping the rate of photons transmitted per second fixed, can improve the performance, under appropriate conditions. We further show that postselecting on the idler detector firing is less efficient at object detection than not postselecting. Published by the American Physical Society 2024

Physical Review A•May 7, 2024•1 citation

Theoretical comparison of quantum and classical illumination for simple detection-based LIDAR

Richard J. Murchie, Jonathan D. Pritchard, John Jeffers

Use of non-classical light in a quantum illumination scheme provides an advantage over classical illumination when used for LIDAR with a simple and realistic detection scheme based on Geiger-mode single photon detectors. Here we provide an analysis that accounts for the additional information gained when detectors do not fire that is typically neglected and show an improvement in performance of quantum illumination. Moreover, we provide a theoretical framework quantifying performance of both quantum and classical illumination for simple target detection, showing parameters for which a quantum advantage exists. Knowledge of the regimes that demonstrate a quantum advantage will inform where possible practical quantum LIDAR utilising non-classical light could be realised.

•Aug 1, 2021•3 citations

Theoretical comparison of quantum and classical illumination for simple detection-based LIDAR

Richard Murchie, Jonathan Pritchard, John Jeffers

Use of non-classical light in a quantum illumination scheme provides an advantage over classical illumination when used for LIDAR with a simple and realistic detection scheme based on Geiger-mode single photon detectors. Here we provide an analysis that accounts for the additional information gained when detectors do not fire that is typically neglected and show an improvement in performance of quantum illumination. Moreover, we provide a theoretical framework quantifying performance of both quantum and classical illumination for simple target detection, showing parameters for which a quantum advantage exists. Knowledge of the regimes that demonstrate a quantum advantage will inform where possible practical quantum LIDAR utilising non-classical light could be realised.

arXiv:2108.08281•Quantum Communications and Quantum Imaging•Jul 30, 2021•4 citations

Quantum Illumination with Multiplexed Photodetection

Hao Dong Yang, Nigam Samantaray, John Jeffers

The advantages of using quantum states of light for object detection are often highlighted in schemes that use simultaneous and optimal measurements. Here, we describe a theoretical but experimentally realizable quantum illumination scheme based on nonsimultaneous and nonoptimal measurements, which can maintain this advantage. In particular, we examine the multiclick-heralded two-mode-squeezed vacuum state as a probe signal in a quantum illumination process. The increase in conditioned signal intensity associated with multiclick heralding is greater than that from a single detector-heralded signal. Our results show, for lossy external conditions, the presence of the target object can be revealed earlier using multiclick measurements. We demonstrate this through sequential shot measurements based on Monte Carlo simulation.

arXiv:2209.11117•Physical Review Applied•Sep 9, 2022•13 citations

Quantum Illumination: A Laboratory Investigation

Bhashyam Balaji, Duncan G. England

Quantum illumination is an idea for detection of targets in the presence of a noisy background using a photon pair that is entangled in some degree of freedom, such as frequency. This paper provides a simple and illustrative proof-of-concept setup of a quantum illumination investigation. Detection and imaging is investigated in the optical regime using a correlated source and the performance of classical illumination and quantum illumination are compared for detection and imaging experiments. The quantum advantage is demonstrated in the acquired data and possible application spaces and technological requirements are identified for developing practical systems.

IEEE International Carnahan Conference on Security Technology (ICCST)•Oct 1, 2018•18 citations

Quantum illumination via quantum-enhanced sensing

Su‐Yong Lee, Yong Sup Ihn, Zaeill Kim

Quantum-enhanced sensing has a goal of enhancing a parameter sensitivity with input quantum states, while quantum illumination has a goal of enhancing a target detection capability with input entangled states in a heavy noise environment. Here we propose a concatenation between quantum-enhanced sensing and quantum illumination that can take quantum advantage over the classical limit. First, phase sensing in an interferometry is connected to a target sensing via quantum Fisher information. Second, the target sensitivity is investigated in noisy quantum-enhanced sensing. Under the same input state energy, for example, $N$-photon entangled states can exhibit better performance than a two-mode squeezed vacuum state and a separable coherent state. Incorporating a photon-number difference measurement, finally, the noisy target sensitivity is connected to a signal-to-noise ratio which is associated with a minimum error probability of discriminating the presence and absence of the target. We show that both the target sensitivity and the signal-to-noise ratio can be enhanced with increasing thermal noise.

arXiv:2004.09234•Physical Review A•Jan 15, 2021•30 citations

The task of sensing the presence of a target object using a weak light source is challenging when the object is embedded in a noisy environment. One possibility is to use quantum illumination to do this, as it can outperform classical illumination in determining the object presence and range. This advantage persists even when both classical and quantum illumination are restricted to identical suboptimal object-detection measurements based on nonsimultaneous, phase-insensitive coincidence counts. Motivated by realistic experimental protocols, we present a theoretical framework for analyzing coincident multishot data with simple detectors. This approach allows for the often-overlooked noncoincidence data to be included, as well as providing a calibration-free threshold for inferring an object’s presence and range, enabling a fair comparison between different detection regimes. Our results quantify the advantage of quantum over classical illumination when performing target discrimination in a noisy thermal environment, including estimating the number of shots required to detect a target with a given confidence level. Published by the American Physical Society 2024

Quantum illumination uses quantum correlations to improve the detection of objects in the presence of background noise. A simple and common practical approach to quantum illumination is to use threshold detectors to measure the idler mode. We investigate the optimization of these protocols. Surprisingly, we find that there can be an advantage to having a signal detector whose quantum efficiency is significantly less than perfect, one that does not vanish for low object reflectivities or signal strengths. We also show that decreasing the separation between pulses, while keeping the rate of photons transmitted per second fixed, can improve the performance, under appropriate conditions. We further show that postselecting on the idler detector firing is less efficient at object detection than not postselecting. Published by the American Physical Society 2024

Use of non-classical light in a quantum illumination scheme provides an advantage over classical illumination when used for LIDAR with a simple and realistic detection scheme based on Geiger-mode single photon detectors. Here we provide an analysis that accounts for the additional information gained when detectors do not fire that is typically neglected and show an improvement in performance of quantum illumination. Moreover, we provide a theoretical framework quantifying performance of both quantum and classical illumination for simple target detection, showing parameters for which a quantum advantage exists. Knowledge of the regimes that demonstrate a quantum advantage will inform where possible practical quantum LIDAR utilising non-classical light could be realised.

Use of non-classical light in a quantum illumination scheme provides an advantage over classical illumination when used for LIDAR with a simple and realistic detection scheme based on Geiger-mode single photon detectors. Here we provide an analysis that accounts for the additional information gained when detectors do not fire that is typically neglected and show an improvement in performance of quantum illumination. Moreover, we provide a theoretical framework quantifying performance of both quantum and classical illumination for simple target detection, showing parameters for which a quantum advantage exists. Knowledge of the regimes that demonstrate a quantum advantage will inform where possible practical quantum LIDAR utilising non-classical light could be realised.

The advantages of using quantum states of light for object detection are often highlighted in schemes that use simultaneous and optimal measurements. Here, we describe a theoretical but experimentally realizable quantum illumination scheme based on nonsimultaneous and nonoptimal measurements, which can maintain this advantage. In particular, we examine the multiclick-heralded two-mode-squeezed vacuum state as a probe signal in a quantum illumination process. The increase in conditioned signal intensity associated with multiclick heralding is greater than that from a single detector-heralded signal. Our results show, for lossy external conditions, the presence of the target object can be revealed earlier using multiclick measurements. We demonstrate this through sequential shot measurements based on Monte Carlo simulation.

Quantum illumination is an idea for detection of targets in the presence of a noisy background using a photon pair that is entangled in some degree of freedom, such as frequency. This paper provides a simple and illustrative proof-of-concept setup of a quantum illumination investigation. Detection and imaging is investigated in the optical regime using a correlated source and the performance of classical illumination and quantum illumination are compared for detection and imaging experiments. The quantum advantage is demonstrated in the acquired data and possible application spaces and technological requirements are identified for developing practical systems.

Quantum-enhanced sensing has a goal of enhancing a parameter sensitivity with input quantum states, while quantum illumination has a goal of enhancing a target detection capability with input entangled states in a heavy noise environment. Here we propose a concatenation between quantum-enhanced sensing and quantum illumination that can take quantum advantage over the classical limit. First, phase sensing in an interferometry is connected to a target sensing via quantum Fisher information. Second, the target sensitivity is investigated in noisy quantum-enhanced sensing. Under the same input state energy, for example,

N

-photon entangled states can exhibit better performance than a two-mode squeezed vacuum state and a separable coherent state. Incorporating a photon-number difference measurement, finally, the noisy target sensitivity is connected to a signal-to-noise ratio which is associated with a minimum error probability of discriminating the presence and absence of the target. We show that both the target sensitivity and the signal-to-noise ratio can be enhanced with increasing thermal noise.