Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2305.06976

Exploration of Optimizing FPGA-based Qubit Controller for Experiments on Superconducting Quantum Computing Hardware

Hans Johnson, Silvia Zorzetti, Jafar Saniie

Published May 11, 2023• 0 citations
arXivHTMLPDF

Abstract

This work explores avenues and target areas for optimizing FPGA-based control hardware for experiments conducted on superconducting quantum computing systems and serves as an introduction to some of the current research at the intersection of classical and quantum computing hardware. With the promise of building larger-scale error-corrected quantum computers based on superconducting qubit architecture, innovations to room-temperature control electronics are needed to bring these quantum realizations to fruition. The QICK (Quantum Instrumentation Control Kit) is one leading experimental FPGA-based implementations. However, its integration into other experimental quantum computing architectures, especially those using superconducting radiofrequency (SRF) cavities, is largely unexplored. We identify some key target areas for optimizing control electronics for superconducting qubit architectures and provide some preliminary results to the resolution of a control pulse waveform. With optimizations targeted at 3D superconducting qubit setups, we hope to bring to light some of the requirements in classical computational methodologies to bring out the full potential of this quantum computing architecture, and to convey the excitement of progress in this research.

DOI
10.48550/arxiv.2305.06976

Related papers

Exploration of Optimizing FPGA-based Qubit Controller for Experiments on Superconducting Quantum Computing Hardware

Hans Johnson, Silvia Zorzetti, Jafar Saniie

This work explores avenues and target areas for optimizing FPGA-based control hardware for experiments conducted on superconducting quantum computing systems and serves as an introduction to some of the current research at the intersection of classical and quantum computing hardware. With the promise of building larger-scale error-corrected quantum computers based on superconducting qubit architecture, innovations to room-temperature control electronics are needed to bring these quantum realizations to fruition. The QICK (Quantum Instrumentation Control Kit) is one leading experimental FPGA-based implementations. However, its integration into other experimental quantum computing architectures, especially those using superconducting radiofrequency (SRF) cavities, is largely unexplored. We identify some key target areas for optimizing control electronics for superconducting qubit architectures and provide some preliminary results to the resolution of a control pulse waveform. With optimizations targeted at 3D superconducting qubit setups, we hope to bring to light some of the requirements in classical computational methodologies to bring out the full potential of this quantum computing architecture, and to convey the excitement of progress in this research.

IEEE International Conference on Electro Information Technology•May 18, 2023•4 citations

Exploration of Optimizing FPGA-based Qubit Controller for Experiments on Superconducting Quantum Computing Hardware

Hans Johnson

identify some key target areas for optimizing control electronics for superconducting qubit architectures and provide some preliminary results to the resolution of a control pulse waveform. With optimizations targeted at 3D superconducting qubit setups, we hope to bring to light some of the requirements in classical computational methodologies to bring out the full potential of this quantum computing architecture, and to convey the excitement of progress in this research.

•May 26, 2023•1 citation

Investigation of Optimizations for FPGA-based Controls Hardware for Experiments using Superconducting Quantum Computing Systems

Hans Johnson

identify some key target areas for optimizing control electronics for superconducting qubit architectures and provide some preliminary results to the resolution of a control pulse waveform. With optimizations targeted at 3D superconducting qubit setups, we hope to bring to light some of the requirements in classical computational methodologies to bring out the full potential of this quantum computing architecture, and to convey the excitement of progress in this research.

•Apr 27, 2023•0 citations

Superconducting qubit readout and control system based on FPGA and development of a pulse sequencer

BOVE, LEONARDO

This thesis presents the development of a superconducting qubit control and readout system based on FPGA technology, with a focus on the design of a pulse sequencer and the integration of frequency-multiplexed control. The system leverages the Quantum Instrumentation Control Kit (QICK), an open-source Xilinx RFSoC-based platform capable of direct digital synthesis and acquisition of microwave signals up to 10 GHz. The QICK firmware was extended to support the simultaneous generation and readout of multiple frequency-multiplexed tones, enabling the control and measurement of several qubits coupled to a shared feedline. This approach optimizes the number of controllable qubits relative to the available ADC and DAC resources on the RFSoC 4x2 board. Furthermore, this work includes the development of Qubase, a Python-based pulse sequencer that allows users to easily define and execute complex sequences of control and measurement pulses through the QICK Python interface. The resulting architecture is both flexible and scalable, providing a foundation for efficient multi-qubit experiments and enabling advanced techniques such as quantum error correction and real-time feedback.

•Sep 27, 2025•0 citations

Quantum Control Architecture and Circuit Blocks for Solid-State Microwave Qubits

Fatemeh Nikbakhtnasrabadi, Martin P. Weides

Quantum computing has made significant strides, with hardware platforms now advanced enough to tackle the challenges of scaling up to larger and more robust systems. Central to this progression is the interface between quantum processors, comprising isolated qubits, and the classical systems required for their control and readout. As these systems transition from few-qubit devices to fault-tolerant architectures, the complexity of this quantum-classical interaction poses significant engineering challenges. Field-Programmable Gate Arrays (FPGAs) have emerged as an adaptable and efficient solution, offering realtime control, low-latency operations, and seamless integration. This review delves into current FPGA-based platforms, including commercial systems, as well as open-source solutions developed by academic research groups. The architecture, features, and contributions of these platforms to addressing scalability and integration issues are thoroughly examined. Additionally, the review highlights innovations in cryogeniccompatible controllers and explores the potential of Cryo-FPGAs to reduce noise and improve fidelity in quantum systems. By providing a comprehensive analysis of current technologies and identifying opportunities for advancement, this review offers valuable insights for researchers and engineers working to develop scalable quantum computing solutions.

•Feb 11, 2025•0 citations

A quantum computing measurement and control system with an FPGA-based scheduling system

Yijun Liu, Yi Li

Large-scale qubit systems represent the future of superconducting quantum computing. As the number of qubits and functions increases, the current qubit control architectures struggle to achieve large-scale expansion. To address this issue, we have developed a field-programmable gate array-based scheduling system, which serves as a control architecture deployed on measurement and control hardware. This system achieves the generation of multi-channel long sequence pulses using minimal storage space, with reusable envelope and instruction designs. The envelopes and instructions are preloaded into the electronics, with each instruction corresponding to a different segment of the output waveform. The architecture we designed allows for extended pulse control lengths and more complex experiments without the requirement for external storage resources. We present the resource utilization of the implementation and compare it with previous measurements under different qubit counts. To verify the functionality of the system, we conducted a series of performance tests and characterization experiments on the deployed electronics. The measured single-qubit relaxation time T1 is 34.1 μs, and the dephasing time T2* is 25.8 μs. We characterized the quality of the control pulses using a randomized benchmarking protocol, achieving an average fidelity of 99.962%.

Review of Scientific Instruments•Nov 1, 2024•1 citation
This work explores avenues and target areas for optimizing FPGA-based control hardware for experiments conducted on superconducting quantum computing systems and serves as an introduction to some of the current research at the intersection of classical and quantum computing hardware. With the promise of building larger-scale error-corrected quantum computers based on superconducting qubit architecture, innovations to room-temperature control electronics are needed to bring these quantum realizations to fruition. The QICK (Quantum Instrumentation Control Kit) is one leading experimental FPGA-based implementations. However, its integration into other experimental quantum computing architectures, especially those using superconducting radiofrequency (SRF) cavities, is largely unexplored. We identify some key target areas for optimizing control electronics for superconducting qubit architectures and provide some preliminary results to the resolution of a control pulse waveform. With optimizations targeted at 3D superconducting qubit setups, we hope to bring to light some of the requirements in classical computational methodologies to bring out the full potential of this quantum computing architecture, and to convey the excitement of progress in this research.
This work explores avenues and target areas for optimizing FPGA-based control hardware for experiments conducted on superconducting quantum computing systems and serves as an introduction to some of the current research at the intersection of classical and quantum computing hardware. With the promise of building larger-scale error-corrected quantum computers based on superconducting qubit architecture, innovations to room-temperature control electronics are needed to bring these quantum realizations to fruition. The QICK (Quantum Instrumentation Control Kit) is one leading experimental FPGA-based implementations. However, its integration into other experimental quantum computing architectures, especially those using superconducting radiofrequency (SRF) cavities, is largely unexplored. We identify some key target areas for optimizing control electronics for superconducting qubit architectures and provide some preliminary results to the resolution of a control pulse waveform. With optimizations targeted at 3D superconducting qubit setups, we hope to bring to light some of the requirements in classical computational methodologies to bring out the full potential of this quantum computing architecture, and to convey the excitement of progress in this research.
This thesis presents the development of a superconducting qubit control and readout system based on FPGA technology, with a focus on the design of a pulse sequencer and the integration of frequency-multiplexed control. The system leverages the Quantum Instrumentation Control Kit (QICK), an open-source Xilinx RFSoC-based platform capable of direct digital synthesis and acquisition of microwave signals up to 10 GHz. The QICK firmware was extended to support the simultaneous generation and readout of multiple frequency-multiplexed tones, enabling the control and measurement of several qubits coupled to a shared feedline. This approach optimizes the number of controllable qubits relative to the available ADC and DAC resources on the RFSoC 4x2 board. Furthermore, this work includes the development of Qubase, a Python-based pulse sequencer that allows users to easily define and execute complex sequences of control and measurement pulses through the QICK Python interface. The resulting architecture is both flexible and scalable, providing a foundation for efficient multi-qubit experiments and enabling advanced techniques such as quantum error correction and real-time feedback.
Quantum computing has made significant strides, with hardware platforms now advanced enough to tackle the challenges of scaling up to larger and more robust systems. Central to this progression is the interface between quantum processors, comprising isolated qubits, and the classical systems required for their control and readout. As these systems transition from few-qubit devices to fault-tolerant architectures, the complexity of this quantum-classical interaction poses significant engineering challenges. Field-Programmable Gate Arrays (FPGAs) have emerged as an adaptable and efficient solution, offering realtime control, low-latency operations, and seamless integration. This review delves into current FPGA-based platforms, including commercial systems, as well as open-source solutions developed by academic research groups. The architecture, features, and contributions of these platforms to addressing scalability and integration issues are thoroughly examined. Additionally, the review highlights innovations in cryogeniccompatible controllers and explores the potential of Cryo-FPGAs to reduce noise and improve fidelity in quantum systems. By providing a comprehensive analysis of current technologies and identifying opportunities for advancement, this review offers valuable insights for researchers and engineers working to develop scalable quantum computing solutions.
Large-scale qubit systems represent the future of superconducting quantum computing. As the number of qubits and functions increases, the current qubit control architectures struggle to achieve large-scale expansion. To address this issue, we have developed a field-programmable gate array-based scheduling system, which serves as a control architecture deployed on measurement and control hardware. This system achieves the generation of multi-channel long sequence pulses using minimal storage space, with reusable envelope and instruction designs. The envelopes and instructions are preloaded into the electronics, with each instruction corresponding to a different segment of the output waveform. The architecture we designed allows for extended pulse control lengths and more complex experiments without the requirement for external storage resources. We present the resource utilization of the implementation and compare it with previous measurements under different qubit counts. To verify the functionality of the system, we conducted a series of performance tests and characterization experiments on the deployed electronics. The measured single-qubit relaxation time T1 is 34.1 μs, and the dephasing time T2* is 25.8 μs. We characterized the quality of the control pulses using a randomized benchmarking protocol, achieving an average fidelity of 99.962%.