Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2304.11532 · Physical Review Research

Minimizing readout-induced noise for early fault-tolerant quantum computers

Yunzhe Zheng, Keita Kanno

Published May 6, 2024• 3 citations
arXivHTMLPDF

Abstract

Quantum error correcting code can diagnose potential errors and correct them based on measured outcomes by leveraging syndrome measurement. However, mid-circuit measurement has been technically challenging for early fault-tolerant quantum computers and the readout-induced noise acts as a main contributor to the logical infidelity. We present a different method for syndrome extraction, namely , that requires only a single-shot measurement on a single ancilla, while the canonical syndrome measurement requires multiple measurements to extract the eigenvalue for each stabilizer generator. As such, we can detect the error in the logical state with minimized readout-induced noise. By adopting our method as a precheck routine for quantum error correcting cycles, we can significantly reduce the readout overhead, the idling time, and the logical error rate during syndrome measurement. We numerically analyze the performance of our protocol using Iceberg code and Steane code under realistic noise parameters based on superconducting hardware and demonstrate the advantage of our protocol in the near-term scenario. As mid-circuit measurements are still error-prone for near-term quantum hardware, our method could boost the applications of early fault-tolerant quantum computing. Published by the American Physical Society 2024

DOI
10.1103/physrevresearch.6.023129

Related papers

Fault-Tolerant Quantum Error Correction: Implementing Hamming-Based Codes with Advanced Syndrome Extraction Techniques

Soham Bhadra, Diyansha Singh, Angana Chowdhury

Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane $[\![7,1,3]\!]$ code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors - a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4$\times$ compared to standard approaches. Our implementations achieve logical error rates as low as $5.1 \times 10^{-5}$ under realistic noise conditions with physical error rates of $10^{-3}$, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.

quant-pharXiv:2601.07860•Jan 13, 2026•0 citations

Fault-Tolerant Quantum Error Correction: Implementing Hamming-Based Codes with Advanced Syndrome Extraction Techniques

Soham Bhadra, Diyansha Singh, Angana Chowdhury

Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [[7,1,3]] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors—a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we’re trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor’s cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane’s encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM’s Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4×compared to standard approaches. Our implementations achieve logical error rates as low as 5.1 ×10^−5 under realistic noise conditions with physical error rates of 10^−3, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.

•Dec 31, 2025•0 citations

Efficient learning of logical noise from syndrome data

Han Zheng, Chia-Tung Chu, Senrui Chen +4 more

Characterizing errors in quantum circuits is essential for device calibration, yet detecting rare error events requires a large number of samples. This challenge is particularly severe in calibrating fault-tolerant, error-corrected circuits, where logical error probabilities are suppressed to higher order relative to physical noise and are therefore difficult to calibrate through direct logical measurements. Recently, Wagner et al. [PRL 130, 200601 (2023)] showed that, for phenomenological Pauli noise models, the logical channel can instead be inferred from syndrome measurement data generated during error correction. Here, we extend this framework to realistic circuit-level noise models. From a unified code-theoretic perspective and spacetime code formalism, we derive necessary and sufficient conditions for learning the logical channel from syndrome data alone and explicitly characterize the learnable degrees of freedom of circuit-level Pauli faults. Using Fourier analysis and compressed sensing, we develop efficient estimators with provable guarantees on sample complexity and computational cost. We further present an end-to-end protocol and demonstrate its performance on several syndrome-extraction circuits, achieving orders-of-magnitude sample-complexity savings over direct logical benchmarking. Our results establish syndrome-based learning as a practical approach to characterizing the logical channel in fault-tolerant quantum devices.

quant-pharXiv:2601.22286•Feb 2, 2026•0 citations

Fault-Tolerant Quantum Error Correction: Implementing Hamming-Based Codes with Advanced Syndrome Extraction Techniques

Soham Bhadra, Diyansha Singh, Angana Chowdhury

Abstract Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [7,1,3] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors—a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4x compared to standard approaches. Our implementations achieve logical error rates as low as 5.1 x 10 -5 under realistic noise conditions with physical error rates of 10 -3 , while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.

•Jan 6, 2026•0 citations

Characterising the failure mechanisms of error-corrected quantum logic gates

Robin Harper, C. Lainé, Evan T. Hockings +4 more

Mid-circuit measurements used in quantum error correction are essential in the architecture of a fault-tolerant quantum computer, as they read out syndrome data and drive logic gates. Here, we use a heavy-hex code prepared on a superconducting qubit array to investigate how different noise sources impact error-corrected logic. First, we identify that idling errors occurring during readout periods are highly detrimental to a quantum memory. We demonstrate significant improvements to the memory by designing and implementing a low-depth syndrome extraction circuit. Second, we perform a stability experiment to investigate the type of failures that can occur during logic gates due to readout assignment errors. We find that the error rate of the stability experiment improves with additional stabilizer readout cycles, revealing a trade-off as additional stability comes at the expense of time over which the memory can decay. We corroborate our results using holistic device benchmarking and by comparison to numerical simulations. Finally, by varying different parameters in our simulations we identify the key noise sources that impact the fidelity of fault-tolerant logic gates, with measurement noise playing a dominant role in logical gate performance. With rapid progress in quantum error correction, clear performance benchmarks are needed to assess readiness for fault tolerant operation. Here the authors report benchmarking and noise characterization in a superconducting quantum processor, identifying key factors that impact error-corrected logic.

arXiv:2504.07258•Nature Communications•Apr 10, 2026•2 citations

Adaptive Syndrome Extraction

Noah Berthusen, S. Tan, Eric Huang +1 more

Device error rates on current quantum computers have improved enough to where demonstrations of error correction below break even are now possible. Still, the circuits required for quantum error correction introduce significant overhead and sometimes inject more errors than they correct. In this work, we introduce adaptive syndrome extraction as a scheme to improve code performance and reduce the quantum error-correction cycle time by measuring only the stabilizer generators that are likely to provide useful syndrome information. We provide a concrete example of the scheme through the [[4,2,2]] code concatenated with a hypergraph product code and a syndrome-extraction cycle that uses quantum error detection to modify the syndrome-extraction circuits in real time. Compared to nonconcatenated codes and nonadaptive syndrome extraction, we find that the adaptive scheme achieves over an order of magnitude lower logical error rates while requiring fewer gates and physical qubits. Furthermore, we show how to achieve fault-tolerant universal logical computation with [[4,2,2]]-concatenated hypergraph product codes.

arXiv:2502.14835•PRX Quantum•May 28, 2025•6 citations
Quantum error correcting code can diagnose potential errors and correct them based on measured outcomes by leveraging syndrome measurement. However, mid-circuit measurement has been technically challenging for early fault-tolerant quantum computers and the readout-induced noise acts as a main contributor to the logical infidelity. We present a different method for syndrome extraction, namely , that requires only a single-shot measurement on a single ancilla, while the canonical syndrome measurement requires multiple measurements to extract the eigenvalue for each stabilizer generator. As such, we can detect the error in the logical state with minimized readout-induced noise. By adopting our method as a precheck routine for quantum error correcting cycles, we can significantly reduce the readout overhead, the idling time, and the logical error rate during syndrome measurement. We numerically analyze the performance of our protocol using Iceberg code and Steane code under realistic noise parameters based on superconducting hardware and demonstrate the advantage of our protocol in the near-term scenario. As mid-circuit measurements are still error-prone for near-term quantum hardware, our method could boost the applications of early fault-tolerant quantum computing. Published by the American Physical Society 2024
Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [ ⁣[7,1,3] ⁣][\![7,1,3]\!][[7,1,3]] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors - a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4×\times× compared to standard approaches. Our implementations achieve logical error rates as low as 5.1×10−55.1 \times 10^{-5}5.1×10−5 under realistic noise conditions with physical error rates of 10−310^{-3}10−3, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.
Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [[7,1,3]] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors—a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we’re trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor’s cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane’s encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM’s Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4×compared to standard approaches. Our implementations achieve logical error rates as low as 5.1 ×10^−5 under realistic noise conditions with physical error rates of 10^−3, while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.
Characterizing errors in quantum circuits is essential for device calibration, yet detecting rare error events requires a large number of samples. This challenge is particularly severe in calibrating fault-tolerant, error-corrected circuits, where logical error probabilities are suppressed to higher order relative to physical noise and are therefore difficult to calibrate through direct logical measurements. Recently, Wagner et al. [PRL 130, 200601 (2023)] showed that, for phenomenological Pauli noise models, the logical channel can instead be inferred from syndrome measurement data generated during error correction. Here, we extend this framework to realistic circuit-level noise models. From a unified code-theoretic perspective and spacetime code formalism, we derive necessary and sufficient conditions for learning the logical channel from syndrome data alone and explicitly characterize the learnable degrees of freedom of circuit-level Pauli faults. Using Fourier analysis and compressed sensing, we develop efficient estimators with provable guarantees on sample complexity and computational cost. We further present an end-to-end protocol and demonstrate its performance on several syndrome-extraction circuits, achieving orders-of-magnitude sample-complexity savings over direct logical benchmarking. Our results establish syndrome-based learning as a practical approach to characterizing the logical channel in fault-tolerant quantum devices.
Abstract Building reliable quantum computers requires protecting fragile quantum states from inevitable environmental noise and operational errors. While quantum error correction codes like the Steane [7,1,3] code provide elegant theoretical solutions, their practical success hinges critically on how we measure errors—a process called syndrome extraction. The challenge lies in the ancilla qubits used for measurement: when they fail, errors can cascade across the entire quantum system, destroying the very information we're trying to protect. We address this fundamental problem by implementing and comparing three sophisticated syndrome measurement strategies: Shor's cat-state approach, which distributes measurements across multiple entangled ancillas achieving 85-92% preparation success; Steane's encoded-ancilla method using complete error-corrected logical qubits reaching 97.8% syndrome fidelity; and a flexible unified framework that adapts strategies based on hardware capabilities. Through extensive simulations using IBM's Qiskit platform spanning randomized benchmarking and T-heavy circuits, we demonstrate that intelligent ancilla management improves error suppression by up to 2.4x compared to standard approaches. Our implementations achieve logical error rates as low as 5.1 x 10 -5 under realistic noise conditions with physical error rates of 10 -3 , while maintaining near-unity logical fidelity (0.99997) even for deep circuits. The threshold analysis reveals robust performance across distance-3 to distance-13 codes with characteristic threshold curves showing exponential error suppression below the critical physical error rate. These results provide immediately deployable tools for near-term quantum devices and establish practical design principles for scaling toward fault-tolerant quantum computers.
Mid-circuit measurements used in quantum error correction are essential in the architecture of a fault-tolerant quantum computer, as they read out syndrome data and drive logic gates. Here, we use a heavy-hex code prepared on a superconducting qubit array to investigate how different noise sources impact error-corrected logic. First, we identify that idling errors occurring during readout periods are highly detrimental to a quantum memory. We demonstrate significant improvements to the memory by designing and implementing a low-depth syndrome extraction circuit. Second, we perform a stability experiment to investigate the type of failures that can occur during logic gates due to readout assignment errors. We find that the error rate of the stability experiment improves with additional stabilizer readout cycles, revealing a trade-off as additional stability comes at the expense of time over which the memory can decay. We corroborate our results using holistic device benchmarking and by comparison to numerical simulations. Finally, by varying different parameters in our simulations we identify the key noise sources that impact the fidelity of fault-tolerant logic gates, with measurement noise playing a dominant role in logical gate performance. With rapid progress in quantum error correction, clear performance benchmarks are needed to assess readiness for fault tolerant operation. Here the authors report benchmarking and noise characterization in a superconducting quantum processor, identifying key factors that impact error-corrected logic.
Device error rates on current quantum computers have improved enough to where demonstrations of error correction below break even are now possible. Still, the circuits required for quantum error correction introduce significant overhead and sometimes inject more errors than they correct. In this work, we introduce adaptive syndrome extraction as a scheme to improve code performance and reduce the quantum error-correction cycle time by measuring only the stabilizer generators that are likely to provide useful syndrome information. We provide a concrete example of the scheme through the [[4,2,2]] code concatenated with a hypergraph product code and a syndrome-extraction cycle that uses quantum error detection to modify the syndrome-extraction circuits in real time. Compared to nonconcatenated codes and nonadaptive syndrome extraction, we find that the adaptive scheme achieves over an order of magnitude lower logical error rates while requiring fewer gates and physical qubits. Furthermore, we show how to achieve fault-tolerant universal logical computation with [[4,2,2]]-concatenated hypergraph product codes.