Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2302.07424 · Sensors

Microwave Electrometry with Multi-Photon Coherence in Rydberg Atoms

Yin Zheng, Qianzhu Li, Xiaoyun Song, Zhengmao Jia, Michal P. Parniak, Xiao Lu, Yandong Peng

Published Aug 19, 2023• 2 citations
arXivHTMLPDF

Abstract

A scheme for the measurement of a microwave (MW) electric field is proposed via multi-photon coherence in Rydberg atoms. It is based on the three-photon electromagnetically induced absorption (TPEIA) spectrum. In this process, the multi-photon produces a narrow absorption peak, which has a larger magnitude than the electromagnetically induced transparency (EIT) peak under the same conditions. The TPEIA peak is sensitive to MW fields, and can be used to measure MW electric field strength. We found that the magnitude of TPEIA peaks shows a linear relationship with the MW field strength. The simulation results show that the minimum detectable strength of the MW fields is about 1/10 of that based on an common EIT effect, and the probe sensitivity could be improved by about four times. Furthermore, the MW sensing based on three-photon coherence seems to be robust against the changes in the control field and shows a broad tunability, and the scheme may be useful for designing novel MW sensing devices.

DOI
10.3390/s23167269

Related papers

Microwave electrometry with bichromatic electromagnetically induced transparency in Rydberg atoms

Mingzhi Han, He Hao, Xiaoyun Song +4 more

Abstract A scheme for measuring microwave (MW) electric (E) fields is proposed based on bichromatic electromagnetically induced transparency (EIT) in Rydberg atoms. A bichromatic control field drives the excited state transition, whose absorption shows three EIT windows. When a MW field drives the Rydberg transition, the EIT windows split and six transmission peaks appear. It is interesting to find that the peak-to-peak distance of transmission spectrum is sensitive to the MW field strength, which can be used to measure MW E-field. Simulation results show that the measurement accuracy could be increased by about 4 times, and the minimum detectable strength of the MW E-field may be improved by about 3 times compared with the common EIT scheme. After the Doppler averaging, the minimum detectable MW E-field strength is about 5 times larger than that without Doppler effect. Also, we investigate other effects on the sensitivity of the system.

EPJ Quantum Technology•Jul 14, 2023•6 citations

Cavity-enhanced microwave electric field measurement using Rydberg atoms

Yandong Peng, Jinling Wang, Aihong Yang +3 more

An enhanced measurement of the microwave electric (MW E) field by using intracavity Rydberg atoms is proposed. Based on electromagnetically induced transparency (EIT), the intracavity atomic system exhibits two EIT windows, resulting in two narrow peaks in the cavity transmission. The peak-to-peak distance is sensitive to MW fields and can be used to probe MW E-field strength. Simulation results show that the detectable minimum strength of the MW fields is nearly eight times smaller than that without a cavity. Due to cavity coupling, the transmission spectrum is greatly narrowed, which improves the measurement resolution substantially. The numerical results show that the spectrum resolution is increased by more than 20 times. Furthermore, the cavity-enhanced measurement scheme seems to be robust against the changes in the control field strength and shows a broadband tunability.

Journal of the Optical Society of America B•Aug 27, 2018•37 citations

Enhanced microwave metrology using an optical grating in Rydberg atoms

Shengfang Zhao, Yin Zheng, Song Xiaoyun +5 more

An enhanced measurement of the microwave (MW) electric (E) field is proposed using an optical grating in Rydberg atoms. Electromagnetically induced transparency (EIT) of Rydberg atoms appears driven by a probe field and a control field. The EIT transmission spectrum is modulated by an optical grating. When a MW field drives the Rydberg transition, the central principal maximum of the grating spectrum splits. It is interesting to find that the magnitude of the sharp grating spectrum changes linearly with the MW E-field strength, which can be used to measure the MW E-field. The simulation result shows that the minimum detectable E-field strength is nearly 1/8 of that without gratings, and its measurement accuracy could be enhanced by about 60 times. Other discussion of MW metrology based on a grating spectrum is also presented.

Applied Optics•Apr 13, 2023•3 citations

Microwave electric-field measurement with active Raman gain

Aihong Yang, Yandong Peng, Wenpeng Zhou +3 more

An active-Raman-gain (ARG) spectrum of Rydberg atoms is investigated and proposed to measure a microwave (MW) electric (E) field. A strong Raman field couples the ground-state transition with large frequency detuning, and a probe field drives the metastable transition, whose transmission shows a large gain. When a MW field couples the Rydberg transition, the gain peak splits. It is interesting to find that the frequency splitting of gain peaks shows a linear relationship with the MW-field strength, which can be used to measure the MW E field. Moreover, the ARG spectrum has a large peak value that is about 10 times larger than that of common electromagnetically induced transparency schemes. For weak MW fields, the Doppler effect will greatly narrow the gain spectrum if the probe and Raman fields copropagate through the atomic cell, which increases the probe sensitivity dramatically. After the Doppler averaging, the probe sensitivity is enhanced by about 10 times, and the linewidth is narrowed to 1/10 compared to the case without the Doppler effect.

Journal of the Optical Society of America B•Jul 16, 2019•11 citations

Study of microwave quantum electrometric sensors via electromagnetically induced transparency in thermal Rydberg atoms

Zubair Iqbal Dar, Amanjot Kaur, Bindiya Arora +1 more

Abstract Quantum electrometric sensing properties of a four-level system are theoretically investigated for microwave (MW) field measurement in thermal Rydberg atoms. In the considered system, the phenomenon of electromagnetically induced transparency (EIT) is invoked to study the impact of microwave (MW) field strength on its optical response. The amplitude of the MW electric field is obtained directly by measuring the height and frequency of EIT peaks. Further, for MW frequency measurement, the probe spectra are examined for red and blue MW detuned cases. It is found that the responsiveness of 133Cs for MW electric field as well as frequency is relatively higher than 87Rb. The overall sensitivity of both these atoms can be enhanced by the convenient setting of the system and field parameters.

Physica Scripta•Sep 6, 2023•3 citations

Enhanced sensing of 3.4 GHz microwave in multi-level Rydberg atomic system

Jingjing XUE, Ruonan LI, Hu Xuesong +3 more

The Rydberg-based microwave detection is an all-optical technology that uses the strong coherent interaction between Rydberg atoms and microwave field. Different from the traditional microwave meter, the Rydberg atomic sensing is a new-type microwave detector that transforms the microwave spectrum into a coherent optical spectrum, and arouses increasingly the interests due to its high sensibility. For this kind of sensor, the coherence effect induced by coupling atoms with microwave plays a key role, and the decoherence may reduce the sensitivity. A multi-level Rydberg atomic scheme with optimized quantum coherence, which enhances both the bandwidth and the sensitivity for 4 GHz microwave sensing, is demonstrated experimentally in this work. The enhanced quantum coherence of Rydberg electromagnetically induced transparency (EIT) and microwave induced Autler-Townes (AT) splitting in EIT windows are shown using optical pumping at D1 line. The enhanced sensitivity at 3.4 GHz with 0.3 GHz bandwidth can be realized, based on the enhanced EIT-AT spectrum. The experimental results show that in the stepped Rydberg EIT system, the spectral width of EIT and microwave field EIT-AT can be narrowed by optical pumping (OP), so the sensitivity of microwave electric field measurement can be improved. After optimizing the EIT amplitude and adding single-frequency microwaves, the sensitivity of the microwave electric field measurement observed by the AT splitting interval is improved by 1.3 times. This work provides a reference for utilizing atomic microwave detection.

Acta Physica Sinica•Jan 1, 2025•1 citation
A scheme for the measurement of a microwave (MW) electric field is proposed via multi-photon coherence in Rydberg atoms. It is based on the three-photon electromagnetically induced absorption (TPEIA) spectrum. In this process, the multi-photon produces a narrow absorption peak, which has a larger magnitude than the electromagnetically induced transparency (EIT) peak under the same conditions. The TPEIA peak is sensitive to MW fields, and can be used to measure MW electric field strength. We found that the magnitude of TPEIA peaks shows a linear relationship with the MW field strength. The simulation results show that the minimum detectable strength of the MW fields is about 1/10 of that based on an common EIT effect, and the probe sensitivity could be improved by about four times. Furthermore, the MW sensing based on three-photon coherence seems to be robust against the changes in the control field and shows a broad tunability, and the scheme may be useful for designing novel MW sensing devices.
Abstract A scheme for measuring microwave (MW) electric (E) fields is proposed based on bichromatic electromagnetically induced transparency (EIT) in Rydberg atoms. A bichromatic control field drives the excited state transition, whose absorption shows three EIT windows. When a MW field drives the Rydberg transition, the EIT windows split and six transmission peaks appear. It is interesting to find that the peak-to-peak distance of transmission spectrum is sensitive to the MW field strength, which can be used to measure MW E-field. Simulation results show that the measurement accuracy could be increased by about 4 times, and the minimum detectable strength of the MW E-field may be improved by about 3 times compared with the common EIT scheme. After the Doppler averaging, the minimum detectable MW E-field strength is about 5 times larger than that without Doppler effect. Also, we investigate other effects on the sensitivity of the system.
An enhanced measurement of the microwave electric (MW E) field by using intracavity Rydberg atoms is proposed. Based on electromagnetically induced transparency (EIT), the intracavity atomic system exhibits two EIT windows, resulting in two narrow peaks in the cavity transmission. The peak-to-peak distance is sensitive to MW fields and can be used to probe MW E-field strength. Simulation results show that the detectable minimum strength of the MW fields is nearly eight times smaller than that without a cavity. Due to cavity coupling, the transmission spectrum is greatly narrowed, which improves the measurement resolution substantially. The numerical results show that the spectrum resolution is increased by more than 20 times. Furthermore, the cavity-enhanced measurement scheme seems to be robust against the changes in the control field strength and shows a broadband tunability.
An enhanced measurement of the microwave (MW) electric (E) field is proposed using an optical grating in Rydberg atoms. Electromagnetically induced transparency (EIT) of Rydberg atoms appears driven by a probe field and a control field. The EIT transmission spectrum is modulated by an optical grating. When a MW field drives the Rydberg transition, the central principal maximum of the grating spectrum splits. It is interesting to find that the magnitude of the sharp grating spectrum changes linearly with the MW E-field strength, which can be used to measure the MW E-field. The simulation result shows that the minimum detectable E-field strength is nearly 1/8 of that without gratings, and its measurement accuracy could be enhanced by about 60 times. Other discussion of MW metrology based on a grating spectrum is also presented.
An active-Raman-gain (ARG) spectrum of Rydberg atoms is investigated and proposed to measure a microwave (MW) electric (E) field. A strong Raman field couples the ground-state transition with large frequency detuning, and a probe field drives the metastable transition, whose transmission shows a large gain. When a MW field couples the Rydberg transition, the gain peak splits. It is interesting to find that the frequency splitting of gain peaks shows a linear relationship with the MW-field strength, which can be used to measure the MW E field. Moreover, the ARG spectrum has a large peak value that is about 10 times larger than that of common electromagnetically induced transparency schemes. For weak MW fields, the Doppler effect will greatly narrow the gain spectrum if the probe and Raman fields copropagate through the atomic cell, which increases the probe sensitivity dramatically. After the Doppler averaging, the probe sensitivity is enhanced by about 10 times, and the linewidth is narrowed to 1/10 compared to the case without the Doppler effect.
Abstract Quantum electrometric sensing properties of a four-level system are theoretically investigated for microwave (MW) field measurement in thermal Rydberg atoms. In the considered system, the phenomenon of electromagnetically induced transparency (EIT) is invoked to study the impact of microwave (MW) field strength on its optical response. The amplitude of the MW electric field is obtained directly by measuring the height and frequency of EIT peaks. Further, for MW frequency measurement, the probe spectra are examined for red and blue MW detuned cases. It is found that the responsiveness of 133Cs for MW electric field as well as frequency is relatively higher than 87Rb. The overall sensitivity of both these atoms can be enhanced by the convenient setting of the system and field parameters.
The Rydberg-based microwave detection is an all-optical technology that uses the strong coherent interaction between Rydberg atoms and microwave field. Different from the traditional microwave meter, the Rydberg atomic sensing is a new-type microwave detector that transforms the microwave spectrum into a coherent optical spectrum, and arouses increasingly the interests due to its high sensibility. For this kind of sensor, the coherence effect induced by coupling atoms with microwave plays a key role, and the decoherence may reduce the sensitivity. A multi-level Rydberg atomic scheme with optimized quantum coherence, which enhances both the bandwidth and the sensitivity for 4 GHz microwave sensing, is demonstrated experimentally in this work. The enhanced quantum coherence of Rydberg electromagnetically induced transparency (EIT) and microwave induced Autler-Townes (AT) splitting in EIT windows are shown using optical pumping at D1 line. The enhanced sensitivity at 3.4 GHz with 0.3 GHz bandwidth can be realized, based on the enhanced EIT-AT spectrum. The experimental results show that in the stepped Rydberg EIT system, the spectral width of EIT and microwave field EIT-AT can be narrowed by optical pumping (OP), so the sensitivity of microwave electric field measurement can be improved. After optimizing the EIT amplitude and adding single-frequency microwaves, the sensitivity of the microwave electric field measurement observed by the AT splitting interval is improved by 1.3 times. This work provides a reference for utilizing atomic microwave detection.