Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2302.06795

Zeptometer displacement sensing using cavity opto-magneto-mechanics

Tatiana Iakovleva, Bijita Sarma, Jason Twamley

Published Feb 14, 2023• 2 citations
arXivHTMLPDF

Abstract

Optomechanical systems have been proven to be very useful for precision sensing of a variety of forces and effects. In this work, we propose an opto-magno-mechanical setup for spatial displacement sensing where one mirror of the optical cavity is levitated in vacuum via diamagnetic forces in an inhomogenous magnetic field produced by two layers of permanent magnets. We show that the optomechanical system can sense small changes in separation between the magnet layers, as the mechanical frequency of the levitated mirror shifts with changing magnet layer separation $d$. We use Quantum Fisher Information (QFI) as a figure of merit of the displacement sensing precision, and study the fundamental precision bound that can be reached in our setup. Nonlinear interaction inherently present in the optomechanical Hamiltonian improves the precision, and we show that in the case of a pure state of the optical cavity, one can achieve extremely small displacement sensing precision of $Δd\sim36\times10^{-21}\text{m}$. Further, we incorporate decoherence into our system to study the effect of leaking photons from the optical cavity on the QFI.

DOI
10.48550/arxiv.2302.06795

Related papers

Quantum Sensing with Cavity Optomechanical Array for Gravimetry: Optimization of Entanglement Transfer

Zeynab Faroughi, Ali Ahanj

‎Improvement of precision in gravimetry is an important problem in detecting the gravitational waves. In The first demonstration of using quantum optomechanical cavity in gravimetry has recently been reported. This experiment has been done by employing a cooled levitated nano-sphere as a mechanical oscillator in its ground state coupled to a cavity electrodynamics. Following this experiment, in a recent proposal, a quantum optomechanical system has been used for ‎measuring‎ of gravitational acceleration. A generic setup for gravimetry purposes, containing two couples optomechanical cavities, where mirrors play the role of oscillating parts. We study such quantum mechanical system, by investigation the dynamics of entanglement between different parts of two coupled cavity optomechanical cells. ‎For such setup, ‎optimal conditions for predesignated entanglement behavior‎, ‎based on some important parameters of the system‎, ‎like photon-photon and photon-phonon couplings‎, ‎electromagnetic field strength and mechanical mode of moving mirrors are analyzed numerically‎. We show that there exist two different behaviors for entanglement according to selected values for the system parameters. ‎‎‎

•Apr 1, 2020•0 citations

Quantum measurement with cavity optomechanical systems

Chen Xue, Liu Xiao-Wei, Keye Zhang +2 more

Cavity optomechanics originated from the research of interferometric detection of gravitational waves, and later became a fast-growing area of techniques and approaches ranging from the fields of atomic, molecular, and optical physics to nano-science and condensed matter physics as well. Recently, it focused on the exploration of operating mechanical oscillators deep in the quantum regime, with an interest ranging from quantum-classical interface tests to high-precision quantum metrology. In this paper, recent theoretical work of our group in the field of quantum measurement with cavity optomechanical systems is reviewed. We explore the quantum measurement theory and its applications with several unconventional cavity optomechanical schemes working in the quantum regime. This review covers the basics of quantum noises in the cavity optomechanical setups and the resulting standard quantum limit of precision displacement and force measurement. Three novel quantum measurement proposals based on the hybrid optomechanical system are introduced. First, we describe a quantum back-action insulated weak force sensor. It is realized by forming a quantum-mechanics-free subsystem with two optomechanical oscillators of reversed effective mass. Then we introduce a role-reversed atomic optomechanical system which enables the preparation and the quantum tomography of a variety of non-classical states of atoms. In this system, the cavity field acts as a mechanical oscillator driven by the radiation pressure force from an ultracold atomic field. In the end, we recommend a multimode optomechanical transducer that can detect intensities significantly below the single-photon level via adiabatic transfer of the microwave signal to the optical frequency domain. These proposals demonstrate the possible applications of optomechanical devices in understanding of quantum-classical crossover and in achieving quantum measurement limit.

Acta Physica Sinica•Jan 1, 2015•15 citations

Superconducting levitation and control of a high-reflectivity micromirror

Philipp Koller, Jannek J. Hansen, David Walcher +9 more

We introduce a method to suspend an optical micromirror, with a total mass of \SI{30}{\micro\gram}, using superconducting magnetic levitation. The micromirror is formed on a silicon membrane, coated with a high-reflectivity dielectric stack and attached to superconducting microspheres. The object is stably levitated inside a magnetic quadrupole field at cryogenic temperatures. Magnetic feedback on the transverse motion is used to stabilize the position of the levitator within the trapping field, allowing to measure the axial displacement of the levitator using optical interferometry. The system reaches a sensitivity of order \SI{100}{\pico\metre/\sqrt{\hertz}} near the axial trap frequency of \SI{167}{Hz}. This approach enables free-standing mirrors with minimal dissipation and tunable oscillation frequencies, offering a platform for precision sensing and quantum cavity optomechanics in the microgram regime.

quant-pharXiv:2609.17787•Sep 17, 2026

Quantum effect in a hybrid bose-einstein condensate opto-magnomechanical system

Ziyad Imara, K. El Anouz, Farhan Saif +1 more

Abstract We present a hybrid opto-magno-mechanical cavity system consisting of an optical cavity that creates an opto-mechanical cavity with a fixed mirror, a magnon mode in a ferrimagnetic crystal linked to the movable mirror and an intracavity Bose–Einstein condensate. The mechanical displacement is coupled to the magnon by the magnetostriction force and to the optical cavity by the radiation pressure, and the latter is also weakly coupled to a Bose–Einstein condensate. We provide a strategy to measure and quantify entanglement using logarithmic negativity. In addition, we study the quantum or EPR steering in order to present the stationary quantum steering. We consider that all composite modes in our model are given in a Gaussian state described by a covariance matrix. In these studies, we focus on the interaction between the Bose–Einstein condensate and the magnonic modes in a ferrimagnetic crystal. It is important to note that we use experimentally controllable realizable parameters to observe the interaction of modes at temperatures in the microkelvin range.

Journal of Physics B Atomic Molecular and Optical Physics•Oct 22, 2024•6 citations

Advances in quantum optomechanical control based on cavity cold-atom systems

Baijun Li, Tianxiang Lu, Jie Wang +1 more

Cavity optomechanics represents a frontier research direction in quantum science and technology, centered on the control and exploration of interactions between electromagnetic fields and mechanical motion. Rooted in quantum mechanics, this field realizes efficient coupling and precise manipulation of optical fields and mechanical vibrations through the structural design and precise regulation of optical microcavities and mechanical oscillators, thereby revealing and harnessing novel quantum phenomena. In recent years, cavity optomechanics has evolved into an interdisciplinary frontier integrating quantum optics, condensed matter physics, and quantum precision measurement, exhibiting profound application in both fundamental physics research and quantum information science. With advancements in technologies such as nanomanufacturing and laser cooling, optomechanical interactions have been successfully demonstrated in various experimental systems. Among these platforms, cavity cold-atom systems stand out as one of the ideal platforms for implementing quantum optomechanics. Featuring exceptional environmental isolation, long quantum coherence times, and strong light-matter interaction, these systems provide a crucial testbed for exploring strong and even ultrastrong optomechanical coupling effects as well as rich nonlinear quantum phenomena. This paper reviews the recent progress in optomechanical control and manipulation based on cavity cold-atom systems. We first outline the fundamental principles of standard cavity optomechanical systems. Then, we describe the experimental realization of linear and nonlinear optomechanical couplings in cold-atom systems. After that, we focus on the representative applications of this platform in high-precision quantum sensing, quantum memory, and the preparation of macroscopic nonclassical states. Finally, we give an outlook and challenges in this field.

quant-pharXiv:2610.20040•Oct 15, 2026

Quantum Magnetometer with Dual‐Coupling Optomechanics

Gui‐Lei Zhu, Jing Liu, Ying Wu +1 more

Abstract An experimentally feasible magnetometer based on a dual‐coupling optomechanical system is proposed, where the radiation‐pressure coupling transduces the magnetic signal to the optical phase, and the quadratic optomechanical interaction induces a periodic squeezing effect. The latter not only amplifies the signal to be measured, but also accelerates the signal transducing rate characterized by an experimentally observable phase accumulation efficiency. In the vicinity of opto‐mechanical decoupled time, the ultimate bound to the estimability of magnetic signal is proportional to , and then the optimized accuracy of estimation can be enhanced nearly three orders with a controllable squeezing parameter . Moreover, this proposal is robust against the mechanical thermal noise, and the sensitivity of a specific measurement can reach to the order of in the presence of dissipations and without ground state cooling of mechanical oscillator. The proposal fundamentally broadens the fields of quantum metrology and cavity optomechanics, with the potential application for on‐chip magnetic detection with high precision.

arXiv:2205.00433•Laser & Photonics Review•Jul 1, 2022•13 citations
Optomechanical systems have been proven to be very useful for precision sensing of a variety of forces and effects. In this work, we propose an opto-magno-mechanical setup for spatial displacement sensing where one mirror of the optical cavity is levitated in vacuum via diamagnetic forces in an inhomogenous magnetic field produced by two layers of permanent magnets. We show that the optomechanical system can sense small changes in separation between the magnet layers, as the mechanical frequency of the levitated mirror shifts with changing magnet layer separation ddd. We use Quantum Fisher Information (QFI) as a figure of merit of the displacement sensing precision, and study the fundamental precision bound that can be reached in our setup. Nonlinear interaction inherently present in the optomechanical Hamiltonian improves the precision, and we show that in the case of a pure state of the optical cavity, one can achieve extremely small displacement sensing precision of Δd∼36×10−21mΔd\sim36\times10^{-21}\text{m}Δd∼36×10−21m. Further, we incorporate decoherence into our system to study the effect of leaking photons from the optical cavity on the QFI.
‎Improvement of precision in gravimetry is an important problem in detecting the gravitational waves. In The first demonstration of using quantum optomechanical cavity in gravimetry has recently been reported. This experiment has been done by employing a cooled levitated nano-sphere as a mechanical oscillator in its ground state coupled to a cavity electrodynamics. Following this experiment, in a recent proposal, a quantum optomechanical system has been used for ‎measuring‎ of gravitational acceleration. A generic setup for gravimetry purposes, containing two couples optomechanical cavities, where mirrors play the role of oscillating parts. We study such quantum mechanical system, by investigation the dynamics of entanglement between different parts of two coupled cavity optomechanical cells. ‎For such setup, ‎optimal conditions for predesignated entanglement behavior‎, ‎based on some important parameters of the system‎, ‎like photon-photon and photon-phonon couplings‎, ‎electromagnetic field strength and mechanical mode of moving mirrors are analyzed numerically‎. We show that there exist two different behaviors for entanglement according to selected values for the system parameters. ‎‎‎
Cavity optomechanics originated from the research of interferometric detection of gravitational waves, and later became a fast-growing area of techniques and approaches ranging from the fields of atomic, molecular, and optical physics to nano-science and condensed matter physics as well. Recently, it focused on the exploration of operating mechanical oscillators deep in the quantum regime, with an interest ranging from quantum-classical interface tests to high-precision quantum metrology. In this paper, recent theoretical work of our group in the field of quantum measurement with cavity optomechanical systems is reviewed. We explore the quantum measurement theory and its applications with several unconventional cavity optomechanical schemes working in the quantum regime. This review covers the basics of quantum noises in the cavity optomechanical setups and the resulting standard quantum limit of precision displacement and force measurement. Three novel quantum measurement proposals based on the hybrid optomechanical system are introduced. First, we describe a quantum back-action insulated weak force sensor. It is realized by forming a quantum-mechanics-free subsystem with two optomechanical oscillators of reversed effective mass. Then we introduce a role-reversed atomic optomechanical system which enables the preparation and the quantum tomography of a variety of non-classical states of atoms. In this system, the cavity field acts as a mechanical oscillator driven by the radiation pressure force from an ultracold atomic field. In the end, we recommend a multimode optomechanical transducer that can detect intensities significantly below the single-photon level via adiabatic transfer of the microwave signal to the optical frequency domain. These proposals demonstrate the possible applications of optomechanical devices in understanding of quantum-classical crossover and in achieving quantum measurement limit.
We introduce a method to suspend an optical micromirror, with a total mass of \SI{30}{\micro\gram}, using superconducting magnetic levitation. The micromirror is formed on a silicon membrane, coated with a high-reflectivity dielectric stack and attached to superconducting microspheres. The object is stably levitated inside a magnetic quadrupole field at cryogenic temperatures. Magnetic feedback on the transverse motion is used to stabilize the position of the levitator within the trapping field, allowing to measure the axial displacement of the levitator using optical interferometry. The system reaches a sensitivity of order \SI{100}{\pico\metre/\sqrt{\hertz}} near the axial trap frequency of \SI{167}{Hz}. This approach enables free-standing mirrors with minimal dissipation and tunable oscillation frequencies, offering a platform for precision sensing and quantum cavity optomechanics in the microgram regime.
Abstract We present a hybrid opto-magno-mechanical cavity system consisting of an optical cavity that creates an opto-mechanical cavity with a fixed mirror, a magnon mode in a ferrimagnetic crystal linked to the movable mirror and an intracavity Bose–Einstein condensate. The mechanical displacement is coupled to the magnon by the magnetostriction force and to the optical cavity by the radiation pressure, and the latter is also weakly coupled to a Bose–Einstein condensate. We provide a strategy to measure and quantify entanglement using logarithmic negativity. In addition, we study the quantum or EPR steering in order to present the stationary quantum steering. We consider that all composite modes in our model are given in a Gaussian state described by a covariance matrix. In these studies, we focus on the interaction between the Bose–Einstein condensate and the magnonic modes in a ferrimagnetic crystal. It is important to note that we use experimentally controllable realizable parameters to observe the interaction of modes at temperatures in the microkelvin range.
Cavity optomechanics represents a frontier research direction in quantum science and technology, centered on the control and exploration of interactions between electromagnetic fields and mechanical motion. Rooted in quantum mechanics, this field realizes efficient coupling and precise manipulation of optical fields and mechanical vibrations through the structural design and precise regulation of optical microcavities and mechanical oscillators, thereby revealing and harnessing novel quantum phenomena. In recent years, cavity optomechanics has evolved into an interdisciplinary frontier integrating quantum optics, condensed matter physics, and quantum precision measurement, exhibiting profound application in both fundamental physics research and quantum information science. With advancements in technologies such as nanomanufacturing and laser cooling, optomechanical interactions have been successfully demonstrated in various experimental systems. Among these platforms, cavity cold-atom systems stand out as one of the ideal platforms for implementing quantum optomechanics. Featuring exceptional environmental isolation, long quantum coherence times, and strong light-matter interaction, these systems provide a crucial testbed for exploring strong and even ultrastrong optomechanical coupling effects as well as rich nonlinear quantum phenomena. This paper reviews the recent progress in optomechanical control and manipulation based on cavity cold-atom systems. We first outline the fundamental principles of standard cavity optomechanical systems. Then, we describe the experimental realization of linear and nonlinear optomechanical couplings in cold-atom systems. After that, we focus on the representative applications of this platform in high-precision quantum sensing, quantum memory, and the preparation of macroscopic nonclassical states. Finally, we give an outlook and challenges in this field.
Abstract An experimentally feasible magnetometer based on a dual‐coupling optomechanical system is proposed, where the radiation‐pressure coupling transduces the magnetic signal to the optical phase, and the quadratic optomechanical interaction induces a periodic squeezing effect. The latter not only amplifies the signal to be measured, but also accelerates the signal transducing rate characterized by an experimentally observable phase accumulation efficiency. In the vicinity of opto‐mechanical decoupled time, the ultimate bound to the estimability of magnetic signal is proportional to , and then the optimized accuracy of estimation can be enhanced nearly three orders with a controllable squeezing parameter . Moreover, this proposal is robust against the mechanical thermal noise, and the sensitivity of a specific measurement can reach to the order of in the presence of dissipations and without ground state cooling of mechanical oscillator. The proposal fundamentally broadens the fields of quantum metrology and cavity optomechanics, with the potential application for on‐chip magnetic detection with high precision.