Variational quantum algorithms are tailored to perform within the constraints of current quantum devices, yet they are limited by performance-degrading errors. In this study we consider a noise model that reflects realistic gate errors inherent to variational quantum algorithms. We investigate the decoherence of a variationally prepared quantum state due to this noise model, which causes a deviation from the energy estimation in the variational approach. By performing a perturbative analysis of optimized circuits, we determine the noise threshold at which the criterion set by the stability lemma is met. We assess our findings against the variational quantum eigensolver and quantum approximate optimization algorithm for various problems with up to 14 qubits. Moreover, we show that certain gate errors have a significantly smaller impact on the coherence of the state, allowing us to reduce the execution time without compromising performance.
Variational quantum algorithms are tailored to perform within the constraints of current quantum devices, yet they are limited by performance-degrading errors. In this study we consider a noise model that reflects realistic gate errors inherent to variational quantum algorithms. We investigate the decoherence of a variationally prepared quantum state due to this noise model, which causes a deviation from the energy estimation in the variational approach. By performing a perturbative analysis of optimized circuits, we determine the noise threshold at which the criterion set by the stability lemma is met. We assess our findings against the variational quantum eigensolver and quantum approximate optimization algorithm for various problems with up to 14 qubits. Moreover, we show that certain gate errors have a significantly smaller impact on the coherence of the state, allowing us to reduce the execution time without compromising performance.
Variational quantum algorithms have emerged as a cornerstone of contemporary quantum algorithms research. Practical implementations of these algorithms, despite offering certain levels of robustness against systematic errors, show a decline in performance due to the presence of stochastic errors and limited coherence time. In this work, we develop a recipe for mitigating quantum gate errors using zero-noise extrapolation. We introduce an experimentally amenable method to control error strength in the circuit. We utilize the fact that gate errors in a physical quantum device are distributed inhomogeneously over different qubits and qubit pairs. As a result, one can achieve different circuit error sums based on the manner in which abstract qubits in the circuit are mapped to a physical device. We apply the proposed protocol to variational quantum algorithms and find that the estimated energy is approximately linear with respect to the circuit error sum (CES). Consequently, a linear fit through the energy-CES data, when extrapolated to zero CES, can approximate the energy estimated by a noiseless variational algorithm. We demonstrate this numerically and investigate the applicability range of the technique.
Variational quantum algorithms (VQAs) offer the most promising path to obtaining quantum advantages via noisy intermediate-scale quantum (NISQ) processors. Such systems leverage classical optimization to tune the parameters of a parameterized quantum circuit (PQC). The goal is minimizing a cost function that depends on measurement outputs obtained from the PQC. Optimization is typically implemented via stochastic gradient descent (SGD). On NISQ computers, gate noise due to imperfections and decoherence affects the stochastic gradient estimates by introducing a bias. Quantum error mitigation (QEM) techniques can reduce the estimation bias without requiring any increase in the number of qubits, but they in turn cause an increase in the variance of the gradient estimates. This work studies the impact of quantum gate noise on the convergence of SGD for the variational eigensolver (VQE), a fundamental instance of VQAs. The main goal is ascertaining conditions under which QEM can enhance the performance of SGD for VQEs. It is shown that quantum gate noise induces a nonzero error-floor on the convergence error of SGD (evaluated with respect to a reference noiseless PQC), which depends on the number of noisy gates, the strength of the noise, as well as the eigenspectrum of the observable being measured and minimized. In contrast, with QEM, any arbitrarily small error can be obtained. Furthermore, for error levels attainable with or without QEM, QEM can reduce the number of required iterations, but only as long as the quantum noise level is sufficiently large, and a sufficiently large number of measurements is allowed at each SGD iteration. Numerical examples for a max-cut problem corroborate the main theoretical findings.
Variational Quantum Algorithms (VQAs) are a class of hybrid quantum-classical algorithms that leverage on classical optimization tools to find the optimal parameters for a parameterized quantum circuit. One relevant application of VQAs is the Variational Quantum Eigensolver (VQE), which aims at steering the output of the quantum circuit to the ground state of a certain Hamiltonian. Recent works have provided global convergence guarantees for VQEs under suitable local surjectivity and smoothness hypotheses, but little has been done in characterizing convergence of these algorithms when the underlying quantum circuit is affected by noise. In this work, we derive an upper bound on the error on the optimal parameters of a VQE under the effect of different coherent and incoherent noise processes. We then procced to show robust convergence guarantees of the algorithm to the perturbed optimal parameters. Our work provides novel theoretical insight into the behavior of VQAs subject to noise. Furthermore, we accompany our results with numerical simulations implemented via Pennylane.
We simulate the effects of different types of noise in state preparation circuits of variational quantum algorithms. We first use a variational quantum eigensolver to find the ground state of a Hamiltonian in the presence of noise and adopt two quality measures in addition to the energy, namely, fidelity and concurrence. We then extend the task to the one of constructing, with a layered quantum circuit ansatz, a set of general random target states. We determine the optimal circuit depth for different types and levels of noise, and observe that the variational algorithms mitigate the effects of noise by adapting the optimized parameters. We find that the inclusion of redundant parameterized gates makes the quantum circuits more resilient to noise. For such overparameterized circuits, different sets of parameters can result in the same final state in the noiseless case, which we denote as parameter degeneracy. Numerically, we show that this degeneracy can be lifted in the presence of noise, with some states being significantly more resilient to noise than others. We also show that the average deviation from the target state is linear in the noise level, as long as this is small compared to a circuit-dependent threshold. In this region, the deviation is well described by a stochastic model. Above the threshold, the optimization can converge to states with largely different physical properties from the true target state, so for practical applications it is critical to ensure that noise levels are below this threshold.
Abstract Noisy Intermediate-Scale Quantum (NISQ) devices are near-term quantum computing devices that inherently suffer from imperfect gate implementation, decoherence, and measurement noise. The main type of variational quantum algorithms(VQAs) is based on Parameterized Quantum Circuits (PQCs), which, however, face practical challenges due to optimization instability of optimization caused by noise and reduced performance. In this paper, we suggest a comprehensive noise-resilient optimization framework for PQCs, which explicitly incorporates noise-resilient circuit architecture design, incorporating noise-aware training strategies into the variational optimization loop. The framework uses circuit structures that are efficient in depth and are hardware compatible in addition to adaptive optimizer choice, stochastic optimization, and averaging as a part of repeated measurement to reduce the impacts of realistic noise. Large-scale experiments are performed with different amounts of qubits, depths of the circuit and noise strengths with realistic noise models. The findings indicate that the convergence rate is faster, the stability is increased, the variability of run-to-run variability is minimized, and other robustness is better than the noise-unaware optimization techniques. Moreover, systematic studies determine optimal operating regions that optimally trade-off expressibility and noise tolerance to offer useful design advice on trusted implementation of VQAs with near-term quantum hardware.
Quantum computers offer a route to outperform classical methods in tasks such as molecular simulation, motivating hybrid algorithms like the Variational Quantum Eigensolver (VQE) for near-term devices. Silicon spin qubits are a promising platform for scalable quantum computation, but their performance is limited by hardware imperfections -- most notably charge-noise-induced potential fluctuations and static miscalibration of gate-electrode voltages -- which degrade quantum gate fidelities and, ultimately, algorithmic accuracy. Here we develop a hardware-algorithm co-simulation framework for silicon quantum-dot processors that links 3D electrostatics to effective g-factors and exchange couplings, and propagates voltage-level noise through realistic control pulses. Using VQE for H2 ground-state energy estimation as a circuit-level testbed, we study both static scaling/offset errors on the gate-electrode voltages and stochastic fluctuations modeled as random-telegraph noise with tunable amplitudes and switching times. At the gate level, we show that exchange-based two-qubit gates are roughly an order of magnitude more sensitive to these types of noise than ESR-driven single-qubit rotations. Quantum process tomography and Kraus-operator analysis further distinguish coherent and incoherent contributions and quantify the fraction of error that is, in principle, correctable by a compensating unitary. Embedding these noise models into the VQE circuit, we identify regimes of miscalibration strength and noise switching time compatible with chemically accurate energy estimates, and discuss how statistical post-processing based on the full distribution of noisy energy estimates could further improve accuracy.