Quantum computers promise a great computational advantage over classical computers, which might help solve various computational challenges such as the simulation of complicated quantum systems, finding optimum in large optimization problems, and solving large-scale linear algebra problems. Current available quantum devices have only a limited amount of qubits and a high level of noise, limiting the size of problems that can be solved accurately with those devices. Variational quantum algorithms (VQAs) have emerged as a leading strategy to address these limitations by optimizing cost function based on measurement results of shallow depth circuits. Recently, various pulse engineering methods were suggested in order to improve VQA results, including optimizing pulse parameters instead of gate angles as part of the VQA optimization process. In this paper, we suggest a novel pulse-based ansatz, which is parameterized mainly by pulses’ duration of pre-defined pulse structures. This ansatz structure provides relatively low amounts of optimization parameters while maintaining high expressibility, allowing fast convergence. In addition, the ansatz has structured adaptivity to the entanglement level required by the problem, allowing low noise and accurate results. We tested this ansatz against quantum chemistry problems. Specifically, finding the ground-state energy associated with the electron configuration problem, using the variational quantum eigensolver (VQE) algorithm for several different molecules. We manage to achieve chemical accuracy both in simulation for several molecules and on one of IBM’s NISQ devices for the H2 molecule in the STO-3G basis, without the need for extensive error mitigation. Our results are compared to a common gate-based ansatz and show better accuracy and significant latency reduction—up to 7× shorter ansatz schedules.
Quantum computers promise a great computational advantage over classical computers, which might help solve various computational challenges such as the simulation of complicated quantum systems, finding optimum in large optimization problems, and solving large-scale linear algebra problems. Current available quantum devices have only a limited amount of qubits and a high level of noise, limiting the size of problems that can be solved accurately with those devices. Variational quantum algorithms (VQAs) have emerged as a leading strategy to address these limitations by optimizing cost function based on measurement results of shallow depth circuits. Recently, various pulse engineering methods were suggested in order to improve VQA results, including optimizing pulse parameters instead of gate angles as part of the VQA optimization process. In this paper, we suggest a novel pulse-based ansatz, which is parameterized mainly by pulses’ duration of pre-defined pulse structures. This ansatz structure provides relatively low amounts of optimization parameters while maintaining high expressibility, allowing fast convergence. In addition, the ansatz has structured adaptivity to the entanglement level required by the problem, allowing low noise and accurate results. We tested this ansatz against quantum chemistry problems. Specifically, finding the ground-state energy associated with the electron configuration problem, using the variational quantum eigensolver (VQE) algorithm for several different molecules. We manage to achieve chemical accuracy both in simulation for several molecules and on one of IBM’s NISQ devices for the H2 molecule in the STO-3G basis, without the need for extensive error mitigation. Our results are compared to a common gate-based ansatz and show better accuracy and significant latency reduction—up to 7× shorter ansatz schedules.
Variational quantum algorithms (VQAs) have demonstrated great potentials in the Noisy Intermediate Scale Quantum (NISQ) era. In the workflow of VQA, the parameters of ansatz are iteratively updated to approximate the desired quantum states. We have seen various efforts to draft better ansatz with less gates. Some works consider the physical meaning of the underlying circuits, while others adopt the ideas of neural architecture search (NAS) for ansatz generator. However, these designs do not exploit the full advantages of VQAs. Because most techniques target gate ansatz, and the parameters are usually rotation angles of the gates. In quantum computers, the gate ansatz will eventually be transformed into control signals such as microwave pulses on superconducting qubits. These control pulses need elaborate calibrations to minimize the errors such as over-rotation and under-rotation. In the case of VQAs, this procedure will introduce redundancy, but the variational properties of VQAs can naturally handle problems of over-rotation and under-rotation by updating the amplitude and frequency parameters. Therefore, we propose NAPA, a native-pulse ansatz generator framework for VQAs. We generate native-pulse ansatz with trainable parameters for amplitudes and frequencies. In our proposed NAPA, we are tuning parametric pulses, which are natively supported on NISQ computers. Given the limited availability of gradient-based optimizers for pulse-level quantum programs, we choose to deploy non-gradient optimizers in our framework. To constrain the number of parameters sent to the optimizer, we adopt a progressive way to generate our nativepulse ansatz. Experiments are conducted on both simulators and quantum devices for Variational Quantum Eigensolver (VQE) tasks to envaluate our methods. When adopted on NISQ machines, NAPA obtained improved the performance with decreased latency by an average of 86%. NAPA is able to achieve 96.482% and 99.336% accuracy for VQE tasks on H2 and HeH+ respectively. An average accuracy of 97.27% is achieved for medium-size quantum chemistry tasks on CO2, H2O, and NaH. NAPA also demonstrates advantages on quantum optimization tasks even with considerable noises in NISQ machines.
State-of-the-art noisy digital quantum computers can only execute short-depth quantum circuits. Variational algorithms are a promising route to unlock the potential of noisy quantum computers since the depth of the corresponding circuits can be kept well below hardware-imposed limits. Typically, the variational parameters correspond to virtual RZ gate angles, implemented by phase changes of calibrated pulses. By encoding the variational parameters directly as hardware pulse amplitudes and durations, we succeed in further shortening the pulse schedule and overall circuit duration. This decreases the impact of qubit decoherence and gate noise. As a demonstration, we apply our pulse-based variational algorithm to the calculation of the ground state of different hydrogen-based systems (H2,H3, and H4) using IBM cross-resonance-based hardware. We observe a reduction in schedule duration of up to $5\ifmmode\times\else\texttimes\fi{}$ compared to cnot-based Ans\"atze, while also reducing the measured energy. In particular, we observe a sizable improvement of the minimal energy configuration of H3 compared to a cnot-based variational form. Finally, we discuss possible future developments including error-mitigation schemes and schedule optimizations, which will enable further improvements of our approach, paving the way towards the simulation of larger systems on noisy quantum devices.
Variational quantum algorithms (VQAs) have demonstrated great potentials in the Noisy Intermediate Scale Quantum (NISQ) era. In the workflow of VQA, the parameters of ansatz are iteratively updated to approximate the desired quantum states. We have seen various efforts to draft better ansatz with less gates. Some works consider the physical meaning of the underlying circuits, while others adopt the ideas of neural architecture search (NAS) for ansatz generator. However, these designs do not exploit the full advantages of VQAs. Because most techniques target gate ansatz, and the parameters are usually rotation angles of the gates. In quantum computers, the gate ansatz will eventually be transformed into control signals such as microwave pulses on superconducting qubits. These control pulses need elaborate calibrations to minimize the errors such as over-rotation and under-rotation. In the case of VQAs, this procedure will introduce redundancy, but the variational properties of VQAs can naturally handle problems of over-rotation and under-rotation by updating the amplitude and frequency parameters. Therefore, we propose NAPA, a native-pulse ansatz generator framework for VQAs. We generate native-pulse ansatz with trainable parameters for amplitudes and frequencies. In our proposed NAPA, we are tuning parametric pulses, which are natively supported on NISQ computers. Given the limited availability of gradient-based optimizers for pulse-level quantum programs, we choose to deploy non-gradient optimizers in our framework. To constrain the number of parameters sent to the optimizer, we adopt a progressive way to generate our native-pulse ansatz. Experiments are conducted on both simulators and quantum devices for Variational Quantum Eigensolver (VQE) tasks to evaluate our methods.
Variational quantum eigensolvers (VQEs) are among the most promising quantum algorithms for solving electronic structure problems in quantum chemistry, particularly during the noisy intermediate-scale quantum (NISQ) era. In this study, we investigate the capabilities and limitations of VQE algorithms implemented on current quantum hardware for determining molecular ground-state energies, focusing on the adaptive derivative-assembled pseudo-Trotter ansatz VQE (ADAPT-VQE). To address the significant computational challenges posed by molecular Hamiltonians, we explore various well known strategies to simplify the Hamiltonian, optimize the ansatz, and improve classical parameter optimization through modifications of the COBYLA optimizer. These enhancements are integrated into a tailored quantum computing implementation designed to minimize the circuit depth and computational cost. Using benzene as a benchmark system, we demonstrate the application of these optimizations on an IBM quantum computer. Despite these improvements, our results highlight the limitations imposed by current quantum hardware, particularly the impact of quantum noise on state preparation and energy measurement. The noise levels in today's devices prevent meaningful evaluations of molecular Hamiltonians with sufficient accuracy to produce reliable quantum chemical insights. Finally, we extrapolate the requirements for future quantum hardware to enable practical and scalable quantum chemistry calculations using VQE algorithms. This work provides an assessment of current quantum algorithms for molecular modeling on real quantum hardware, highlighting the impact of noise and hardware limitations on the achievable accuracy.
Quantum chemistry is one of the most promising applications of quantum computers in the near future. For noisy intermediate-scale quantum devices, the quantum-classical hybrid framework based on the variational quantum eigensolver (VQE) has become the method of choice. In the literature, there are many different variants of VQE, but it is not known which one is optimal for a given molecule. For this purpose, we perform a thorough benchmarking on more than ten different kinds of VQE ansatzes (in systems up to 30 qubits), based on their performance on the energy accuracy, runtime until convergence, and number of parameters. Our results show that the ADAPT ansatz can be used to obtain more accurate energy for small systems (below 14 qubits), but it costs much more computational resources. For larger molecules, UCCSD0 has better performance. However, all the tested ansatzes can hardly reach chemical accuracy at stretched bond lengths. Our results were obtained using MindSpore Quantum, where the codes and the benchmarking toolkit are publicly available at Gitee.
In recent years, the Variational Quantum Eigensolver (VQE) has emerged as one of the most popular algorithms for solving the electronic structure problem on near-term quantum computers. The utility of VQE is often hindered by the limitations of current quantum hardware, including, but not limited to, short qubit coherence times and low gate fidelities. These limitations become particularly pronounced when VQE is used along with deep quantum circuits, such as those required by the ”Unitary Coupled Cluster Singles and Doubles” (UCCSD) ansatz, often resulting in significant errors. To address these issues, we propose a low-depth ansatz based on parallelized Givens rotations, which can recover substantial correlation energy while drastically reducing circuit depth and two-qubit gate counts for an arbitrary active space (AS). Also, considering the current hardware architectures with low qubit counts, we introduce a systematic way to select molecular orbitals to define active spaces (ASs) that retain significant electron correlation. We validate our approach by computing bond dissociation profiles of water and strongly correlated systems, such as molecular nitrogen and oxygen, across various ASs. Noiseless simulations using the new ansatz yield ground-state energies comparable to those from the UCCSD ansatz while reducing circuit depth by 50–70%. Moreover, in noisy simulations, our approach achieves energy error rates an order of magnitude lower than that of UCCSD. Considering the efficiency and practical usage of our ansatz, we hope that it becomes a potential choice for performing quantum chemistry calculations on near-term quantum devices.