Quantum chemistry is one of the most promising applications of quantum computers in the near future. For noisy intermediate-scale quantum devices, the quantum-classical hybrid framework based on the variational quantum eigensolver (VQE) has become the method of choice. In the literature, there are many different variants of VQE, but it is not known which one is optimal for a given molecule. For this purpose, we perform a thorough benchmarking on more than ten different kinds of VQE ansatzes (in systems up to 30 qubits), based on their performance on the energy accuracy, runtime until convergence, and number of parameters. Our results show that the ADAPT ansatz can be used to obtain more accurate energy for small systems (below 14 qubits), but it costs much more computational resources. For larger molecules, UCCSD0 has better performance. However, all the tested ansatzes can hardly reach chemical accuracy at stretched bond lengths. Our results were obtained using MindSpore Quantum, where the codes and the benchmarking toolkit are publicly available at Gitee.
Quantum chemistry is one of the most promising applications of quantum computers in the near future. For noisy intermediate-scale quantum devices, the quantum-classical hybrid framework based on the variational quantum eigensolver (VQE) has become the method of choice. In the literature, there are many different variants of VQE, but it is not known which one is optimal for a given molecule. For this purpose, we perform a thorough benchmarking on more than ten different kinds of VQE ansatzes (in systems up to 30 qubits), based on their performance on the energy accuracy, runtime until convergence, and number of parameters. Our results show that the ADAPT ansatz can be used to obtain more accurate energy for small systems (below 14 qubits), but it costs much more computational resources. For larger molecules, UCCSD0 has better performance. However, all the tested ansatzes can hardly reach chemical accuracy at stretched bond lengths. Our results were obtained using MindSpore Quantum, where the codes and the benchmarking toolkit are publicly available at Gitee.
One of the most important application areas of molecular quantum chemistry is the study and prediction of chemical reactivity. Large-scale, fully error-tolerant quantum computers could provide exact or near-exact solutions to the underlying electronic structure problem with exponentially less effort than a classical computer thus enabling highly accurate predictions for comparably large molecular systems. In the nearer future, however, only “noisy” devices with a limited number of qubits that are subject to decoherence will be available. For such near-term quantum computers the hybrid quantum-classical variational quantum eigensolver algorithm in combination with the unitary coupled-cluster ansatz (UCCSD-VQE) [Peruzzo et al. Nat. Commun. 2014, 5, 4213 and McClean et al. New J. Phys. 2016, 18, 023023] has become an intensively discussed approach that could provide accurate results before the dawn of error-tolerant quantum computing. In this work we present an implementation of UCCSD-VQE that allows for the first time to treat both open- and closed-shell molecules. We study the accuracy of the obtained energies for nine small molecular systems as well as for four exemplary chemical reactions by comparing to well-established electronic structure methods like (nonunitary) coupled-cluster and density functional theory. Finally, we roughly estimate the required quantum hardware resources to obtain “useful” results for practical purposes.
New approaches into computational quantum chemistry can be developed through the use of quantum computing. While universal, fault-tolerant quantum computers are still not available, and we want to utilize today's noisy quantum processors. One of their flagship applications is the variational quantum eigensolver (VQE)-an algorithm for calculating the minimum energy of a physical Hamiltonian. In this study, we investigate how various types of errors affect the VQE and how to efficiently use the available resources to produce precise computational results. We utilize a simulator of a noisy quantum device, an exact statevector simulator, and physical quantum hardware to study the VQE algorithm for molecular hydrogen. We find that the optimal method of running the hybrid classical-quantum optimization is to: (i) allow some noise in intermediate energy evaluations, using fewer shots per step and fewer optimization iterations, but ensure a high final readout precision; (ii) emphasize efficient problem encoding and ansatz parametrization; and (iii) run all experiments within a short time-frame, avoiding parameter drift with time. Nevertheless, current publicly available quantum resources are still very noisy and scarce/expensive, and even when using them efficiently, it is quite difficult to perform trustworthy calculations of molecular energies.
Variational quantum eigensolvers (VQEs) are among the most promising quantum algorithms for solving electronic structure problems in quantum chemistry, particularly during the noisy intermediate-scale quantum (NISQ) era. In this study, we investigate the capabilities and limitations of VQE algorithms implemented on current quantum hardware for determining molecular ground-state energies, focusing on the adaptive derivative-assembled pseudo-Trotter ansatz VQE (ADAPT-VQE). To address the significant computational challenges posed by molecular Hamiltonians, we explore various well known strategies to simplify the Hamiltonian, optimize the ansatz, and improve classical parameter optimization through modifications of the COBYLA optimizer. These enhancements are integrated into a tailored quantum computing implementation designed to minimize the circuit depth and computational cost. Using benzene as a benchmark system, we demonstrate the application of these optimizations on an IBM quantum computer. Despite these improvements, our results highlight the limitations imposed by current quantum hardware, particularly the impact of quantum noise on state preparation and energy measurement. The noise levels in today's devices prevent meaningful evaluations of molecular Hamiltonians with sufficient accuracy to produce reliable quantum chemical insights. Finally, we extrapolate the requirements for future quantum hardware to enable practical and scalable quantum chemistry calculations using VQE algorithms. This work provides an assessment of current quantum algorithms for molecular modeling on real quantum hardware, highlighting the impact of noise and hardware limitations on the achievable accuracy.
Variational quantum eigensolver (VQE) is demonstrated to be the promising methodology for quantum chemistry based on near-term quantum devices. However, many problems are yet to be investigated for this methodology, such as the influences of optimization algorithm and basis size on the accuracy and efficiency for quantum computing. To address these issues, five molecules (H2, LiH, HF, N2 and F2) are studied in this work based on the VQE method using unitary coupled cluster (UCC) ansatz. The performance of the gradient optimization L-BFGS-B is compared with that of the direct search method COBYLA. The former converges more quickly, but the accuracy of energy surface is a little lower. The basis set shows a vital influence on the accuracy and efficiency. A large basis set generally provides an accurate energy surface, but induces a significant increase in computing time. The 631g basis is generally required from the energy surface of the simplest H2 molecule. For practical applications of VQE, complete active space (CAS) is suggested based on limited quantum resources. With the same number of qubits, more occupied orbitals included in CAS gives a better accuracy for the energy surface and a smaller evaluation number in the VQE optimization. Additionally, the electronic structure, such as filling fraction of orbitals, the bond strength of a molecule and the maximum nuclear charge also influences the performance of optimization, where half occupation of orbitals generally requires a large computation cost.
The Variational Quantum Eigensolver (VQE) is a promising quantum algorithm for applications in chemistry within the Noisy Intermediate-Scale Quantum (NISQ) era. The ability for a quantum computer to simulate electronic structures with high accuracy would have a profound impact on material and biochemical science with potential applications e.g., to the development of new drugs. However, considering the variety of quantum hardware architectures, it is still uncertain which hardware concept is most suited to execute the VQE for e.g., the simulation of molecules. Aspects to consider here are the required connectivity of the quantum circuit used, the size and the depth and thus the susceptibility to noise effects. Besides theo-retical considerations, empirical studies using available quantum hardware may help to clarify the question of which hardware technology might be better suited for a certain given application and algorithm. Going one step into this direction, within this work, we present results using the VQE for the simulation of the hydrogen molecule, comparing superconducting and ion trap quantum computers. The experiments are carried out with a standardized setup of ansatz and optimizer, selected to reduce the number of required iterations. The findings are analyzed considering different quantum processor types, calibration data as well as the depth and gate counts of the circuits required for the different hardware concepts after transpilation.
Quantum computing promises to efficiently and accurately solve many important problems in quantum chemistry which elude classical solvers, such as the electronic structure problem of highly correlated materials. Two leading methods in solving the ground state problem are the Variational Quantum Eigensolver (VQE) and Adiabatic Quantum Computing (AQC) algorithms. VQE often struggles with convergence due to the energy landscape being highly non-convex and the existence of barren plateaux, and implementing AQC is beyond the capabilities of current quantum devices as it requires deep circuits. Adiabatically-inspired algorithms aim to fill this gap. In this paper, we first present a unifying framework for these algorithms and then benchmark the following methods: the Adiabatically Assisted VQE (AAVQE) (Garcia-Saez and Latorre (2018)), the Variational Adiabatic Quantum Computing (VAQC) (Harwood et al (2022)), and the Adiabatic Quantum Computing with Parametrized Quantum Circuits (AQC-PQC) (Kolotouros et al (2025)) algorithms. Second, we introduce a novel hybrid approach termed G-AQC-PQC, which generalizes the AQC-PQC method, and combines adiabatic-inspired initialization with the low-memory BFGS optimizer, reducing the quantum computational cost of the method. Third, we compare the accuracy of the methods for chemistry applications using the beryllium hydride molecule (BeH2). We compare the approaches across a number of different choices (ansätze types, depth, discretization steps, initial Hamiltonian, adiabatic schedules and method used). Our results show that the G-AQC-PQC outperforms conventional VQE. We further discuss limitations such as the zero-gradient problem and identify regimes where adiabatically-inspired methods offer a tangible advantage for near-term quantum chemistry applications.