Solid-state spin defects are promising quantum sensors for a large variety of sensing targets. Some of these defects couple appreciably to strain in the host material. We propose to use this strain coupling for mechanically mediated dispersive single-shot spin readout by an optomechanically induced transparency measurement. Surprisingly, the estimated measurement times for negatively charged silicon-vacancy defects in diamond are an order of magnitude shorter than those for single-shot optical fluorescence readout. Our scheme can also be used for general parameter-estimation metrology and offers a higher sensitivity than conventional schemes using continuous position detection.
Solid-state spin defects are promising quantum sensors for a large variety of sensing targets. Some of these defects couple appreciably to strain in the host material. We propose to use this strain coupling for mechanically mediated dispersive single-shot spin readout by an optomechanically induced transparency measurement. Surprisingly, the estimated measurement times for negatively charged silicon-vacancy defects in diamond are an order of magnitude shorter than those for single-shot optical fluorescence readout. Our scheme can also be used for general parameter-estimation metrology and offers a higher sensitivity than conventional schemes using continuous position detection.
Abstract Quantum sensors based on nitrogen vacancy (NV) defects in diamond have a demonstrated capability to detect nuclear magnetic resonance (NMR) spectra from proximate molecular nuclei, thereby promising an alternative with higher sensitivity to conventional NMR spectrometers for micro-scale samples. Fluorescence-based readout of these sensors is limited by higher shot noise due to the small number of emitters and photoionisation induced instabilities, meaning there is still significant scope to maximise their sensitivity and temporal resolution. In this work, we demonstrate a new readout protocol based on parameter fitting to a precise model of the NV photo-physics, thereby demonstrating an improvement of 36% in sensitivity and 85% gain in measurement speed. Whereas typical approaches to improvement involve expensive diamond material, and optical and microwave engineering, our method can be readily implemented into existing NV quantum sensing protocols.
Abstract Solid-state spin defects, such as color centers in diamond, are among the most promising candidates for scalable and integrated quantum technologies. In particular, the good optical properties of silicon-vacancy centers in diamond, combined with naturally occurring and exceptionally coherent nuclear spins, serve as a building block for quantum networking applications. Here, we show that leveraging an ultra-high-strained silicon-vacancy center inside a nanodiamond allows us to coherently and efficiently control its electron spin, while mitigating phonon-induced dephasing at liquid helium temperature. Moreover, we indirectly control and characterize a 13C nuclear spin and establish a quantum register. We overcome limited nuclear spin initialization by implementing single-shot nuclear spin readout. Lastly, we demonstrate coherent optical control with GHz rates, thus opening a potential connection of the register to the optical domain. Our work paves the way for future integration of quantum network registers into conventional, well-established photonics and hybrid quantum communication systems.
The negatively charged tin-vacancy center in diamond (SnV−) is a highly promising candidate for next-generation long-distance quantum networks, owing to its bright emission, robustness against electronic noise, and extended spin coherence times at higher temperatures. We demonstrate the measurement of a single SnV− electronic spin with a single-shot readout fidelity of 87.4%, which can be further enhanced to 98.5% using conditional readout. Our findings show that SnV− centers are compatible with rapid microwave spin control, overcoming the typical trade-off between optical readout and spin control found in group-IV centers in diamond. Additionally, we investigate measurement-induced dephasing through weak quantum measurement, shedding light on the fundamental interplay between measurement and decoherence in quantum mechanics, and utilizing the qubit’s spin coherence as a metrological tool. These advancements represent a significant milestone in SnV− based quantum technologies, providing techniques and insights widely applicable to solid-state quantum emitters.
The negatively charged silicon-vacancy (SiV^{-}) color center in diamond has recently emerged as a promising system for quantum photonics. Its symmetry-protected optical transitions enable the creation of indistinguishable emitter arrays and deterministic coupling to nanophotonic devices. Despite this, the longest coherence time associated with its electronic spin achieved to date (∼250 ns) has been limited by coupling to acoustic phonons. We demonstrate coherent control and suppression of phonon-induced dephasing of the SiV^{-} electronic spin coherence by 5 orders of magnitude by operating at temperatures below 500 mK. By aligning the magnetic field along the SiV^{-} symmetry axis, we demonstrate spin-conserving optical transitions and single-shot readout of the SiV^{-} spin with 89% fidelity. Coherent control of the SiV^{-} spin with microwave fields is used to demonstrate a spin coherence time T_{2} of 13 ms and a spin relaxation time T_{1} exceeding 1 s at 100 mK. These results establish the SiV^{-} as a promising solid-state candidate for the realization of quantum networks.
Solid-state quantum sensors based on ensembles of nitrogen-vacancy (NV) centers in diamond have emerged as powerful platforms for high-precision metrology. Coupling the NV ensemble to a microwave cavity mode in a cavity quantum electrodynamics (cQED) configuration enables spin readout that surpasses the limitations of conventional optical detection, achieving sub-picotesla magnetic sensitivities. However, existing continuous-wave cQED approaches remain far from the intrinsic spin-projection-noise limit due to spin saturation and power broadening. Here, we introduce a dispersive cQED readout technique to overcome these fundamental limitations in NV ensemble sensing. We develop a comprehensive theoretical framework describing the dispersive interaction and analyze the time-domain dynamics of a strongly-coupled NV-cavity system. Our results indicate near-unity inverse readout fidelity and femtotesla-level sensitivity using a commercially available diamond NV ensemble. Importantly, the dispersive readout exhibits a distinct sensitivity scaling that improves as 1/N with increasing number of spins N, providing a practical pathway toward approaching the standard quantum limit for solid-state spin-ensemble sensors.
Crystal-strain variation imposes significant limitations on many quantum sensing and information applications for solid-state defect qubits in diamond. Thus, the precision measurement and control of diamond crystal strain is a key challenge. Here, we report diamond strain measurements with a unique set of capabilities, including micron-scale spatial resolution, a millimeter-scale field of view, and a 2-order-of-magnitude improvement in volume-normalized sensitivity over previous work, reaching $5(2)\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}8}/\sqrt{\mathrm{Hz}\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}{\mathrm{m}}^{\ensuremath{-}3}}$ (with spin-strain coupling coefficients representing the dominant systematic uncertainty). We use strain-sensitive spin-state interferometry on ensembles of nitrogen-vacancy (N-V) color centers in single-crystal bulk diamond with low strain gradients. This quantum interferometry technique provides insensitivity to magnetic-field inhomogeneity from the electronic and nuclear spin bath, thereby enabling long N-V--ensemble electronic spin dephasing times and enhanced strain sensitivity, as well as broadening the potential applications of the technique beyond isotopically enriched or high-purity diamond. We demonstrate the strain-sensitive measurement protocol first on a confocal scanning laser microscope, providing quantitative measurement of sensitivity as well as three-dimensional strain mapping; and second on a wide-field-imaging quantum diamond microscope. Our strain-microscopy technique enables fast, sensitive characterization for diamond material engineering and nanofabrication; as well as diamond-based sensing of strains applied externally, as in diamond anvil cells or embedded diamond stress sensors, or internally, as by crystal damage due to particle-induced nuclear recoils.