Common methods to achieve photon number resolution rely on fast on-off single-photon detectors in conjunction with temporal or spatial mode multiplexing. Yet, these methods suffer from an inherent trade-off between the efficiency of photon number discrimination and photon detection rate. Here, we introduce a method of photon number resolving detection that overcomes these limitations by replacing mode multiplexing with coherent absorption of a single optical mode in a distributed detector array. Distributed coherent absorption ensures complete and uniform absorption of light among the constituent detectors, enabling fast and efficient photon number resolution. As a proof-of-concept, we consider the case of a distributed array of superconducting nanowire single-photon detectors with realistic parameters and show that deterministic absorption and arbitrarily high photon number discrimination efficiency can be achieved by increasing the number of detectors in the array. Photon number resolution without optical mode multiplication provides a simple yet effective method to discriminate an arbitrary number of photons in large arrays of on-off detectors or in smaller arrays of mode multiplexed detectors.
Common methods to achieve photon number resolution rely on fast on-off single-photon detectors in conjunction with temporal or spatial mode multiplexing. Yet, these methods suffer from an inherent trade-off between the efficiency of photon number discrimination and photon detection rate. Here, we introduce a method of photon number resolving detection that overcomes these limitations by replacing mode multiplexing with coherent absorption of a single optical mode in a distributed detector array. Distributed coherent absorption ensures complete and uniform absorption of light among the constituent detectors, enabling fast and efficient photon number resolution. As a proof-of-concept, we consider the case of a distributed array of superconducting nanowire single-photon detectors with realistic parameters and show that deterministic absorption and arbitrarily high photon number discrimination efficiency can be achieved by increasing the number of detectors in the array. Photon number resolution without optical mode multiplication provides a simple yet effective method to discriminate an arbitrary number of photons in large arrays of on-off detectors or in smaller arrays of mode multiplexed detectors.
Standard linear optical detectors have a maximum sensitivity in the few hundreds of photons range, limited by amplifier noise. On the other hand, single photon detectors, which are the most sensitive detectors, are strongly nonlinear: One or more photons result in the same output signal. Photon number resolving (PNR) detectors, which have the ability to discriminate the number of photons in a weak optical pulse, are of great importance in the field of quantum information processing and quantum cryptography. Moreover, a PNR detector with large dynamic range can cover the gap between these two detection modes. Such detectors are greatly desirable not only in quantum information science and technology, but also in any application dealing with low light levels. In this work, we propose a novel approach to photon number resolving detectors based on spatial multiplexing of nanowire superconducting single-photon detectors. In the proposed approach, N superconducting nanowires, each connected in parallel to an integrated resistor, are connected in series. Photon absorption in a nanowire switches its bias current to the parallel resistor, forming a voltage pulse across it. The sum of these voltages, proportional to the number of absorbed photons, is measured at the output. The use of a cryogenic preamplifier with high input impedance for the read-out increases the linearity, the signal to noise ratio, and the speed. With this combination, we expect to be able to count up to few tens of photons with high fidelity, excellent timing resolution, and very high sensitivity in the telecommunication wavelength range.
High Resolution Image Download MS PowerPoint Slide Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR) capabilities, they are hampered by low detection speed, timing jitter, and complex cooling and readout requirements. In this work, we present a significant advancement toward achieving high-fidelity PNR single-photon detectors by combing high efficiency superconducting nanowire single-photon detector and spatial multiplexing technology. The unique twin-layer configuration of superconducting nanowire atop a dielectric mirror ensures the near-unity detection efficiency. The segmented design, where each section is shunted by a resistor, enables spatial multiplexing, establishing a mapping relationship between pulse amplitude and registered photons. The fabricated detector exhibits impressive performance metrics, including a single-photon system detection efficiency (SDE) of ∼98% at a dark count rate of 20 cps and photon-number resolution capability up to 32. Further characterization through detector tomography reveals high fidelities for two-, three-, and four-photon events, approximately 87%, 73%, and 40% respectively. Moreover, the detector operates at a high count rate of 41 MHz at 3 dB-SDE, with a low timing jitter of as low as 40 ps. With its near-unity efficiency, high photon-number resolution, low dark count rate, fast detection speed, and superior timing resolution, we expect significant interest in these detectors, promising substantial benefits for weak light detection and optical quantum information applications.
Abstract Single-photon detectors are ubiquitous in quantum information science and quantum sensing. They are key enabling technologies for numerous scientific discoveries and fundamental tests of quantum optics. Photon-number-revolving detectors are the ultimate measurement tool of light. However, few detectors to date can provide high-fidelity photon number resolution at few-photon levels. Here, we demonstrate an on-chip detector that can resolve up to 100 photons by spatiotemporally multiplexing an array of superconducting nanowires along a single waveguide. The unparalleled photon number resolution paired with the high-speed response exclusively allows us to unveil the quantum photon statistics of a true thermal light source for the first time, which is realized by direct measurement of high-order correlation function g(N) with N up to 15, observation of photon-subtraction-induced photon number enhancement, and quantum-limited state discrimination against a coherent light source. Our detector provides a viable route towards various important applications, including photonic quantum computation and quantum metrology.
The conventional optical detectors operate in a linear mode, but their sensitivity is limited due to the noise in the readout electronics. Single photon detectors, on the other hand, have the highest sensitivity, but are strongly nonlinear. Photon number resolving detectors, which can precisely determine the number of photons in weak optical pulses, are potential candidates to fill the gap between these two detection modes. We present the design of photon number resolving detectors with large dynamic range, based on spatial multiplexing of superconducting single photon detectors, with excellent timing resolution and very high sensitivity at the telecommunication wavelength range.