Within the many different models that appeared with the use of cold atoms to design BECs the bubble trap shaped potential has been of great interest. For the anisotropic bubble trap physics in the thin-shell limit the relationship between the physical parameters and the resulting manifold geometry is yet to be fully understood. In this paper, we work towards this goal showing how the parameters of the system must be manipulated in order to allow for a non-collapsing thin-shell limit. In such a limit, a dimensional compactification takes place thus leading to an effective 2D Hamiltonian which relates to up-to-date bubble trap experiments. At last, our Hamiltonian is pertubatively solved for some particular cases as applications of our theory.
Within the many different models that appeared with the use of cold atoms to design BECs the bubble trap shaped potential has been of great interest. For the anisotropic bubble trap physics in the thin-shell limit the relationship between the physical parameters and the resulting manifold geometry is yet to be fully understood. In this paper, we work towards this goal showing how the parameters of the system must be manipulated in order to allow for a non-collapsing thin-shell limit. In such a limit, a dimensional compactification takes place thus leading to an effective 2D Hamiltonian which relates to up-to-date bubble trap experiments. At last, our Hamiltonian is pertubatively solved for some particular cases as applications of our theory.
Abstract Within the many different models, that appeared with the use of cold atoms to create BECs, the bubble trap shaped potential has been of great interest. However, the relationship between the physical parameters and the resulting manifold geometry remains yet to be fully understood for the anisotropic bubble trap physics in the thin-shell limit. In this paper, we work towards this goal by showing how the parameters of the system must be manipulated in order to allow for a non-collapsing thin-shell limit. In such a limit, a dimensional compactification takes place, thus leading to an effective 2D Hamiltonian which relates to up-to-date bubble trap experiments. At last, the resulting Hamiltonian is perturbatively solved for both the ground-state wave function and the excitation frequencies in the leading order of deviations from a spherical bubble trap.
Inspired by investigations of Bose-Einstein condensates (BECs) produced in the Cold Atom Laboratory (CAL) aboard the International Space Station, we present a study of thermodynamic properties of shell-shaped BECs. Within the context of a spherically symmetric ``bubble trap'' potential, we study the evolution of the system from small filled spheres to hollow, large, thin shells via the tuning of trap parameters. We analyze the bubble trap spectrum and states and track the distinct changes in spectra between radial and angular modes across the evolution. This separation of the excitation spectrum provides a basis for quantifying dimensional crossover to quasi-2D physics at a given temperature. Using the spectral data, for a range of trap parameters, we compute the critical temperature for a fixed number of particles to form a BEC. For a set of initial temperatures, we also evaluate the change in temperature that would occur in adiabatic expansion from small filled sphere to large thin shell were the trap to be dynamically tuned. We show that the system cools during this expansion but that the decrease in critical temperature occurs more rapidly, thus resulting in depletion of any initial condensate. We contrast our spectral methods with standard semiclassical treatments, which we find must be used with caution in the thin-shell limit. With regard to interactions, using energetic considerations and corroborated through Bogoliubov treatments, we demonstrate that they would be less important for thin shells due to reduced density but vortex physics would become more predominant. Finally, we apply our treatments to traps that realistically model CAL experiments and borrow from the thermodynamic insights found in the idealized bubble case during adiabatic expansion.
Extending the understanding of Bose-Einstein condensate (BEC) physics to new geometries and topologies has a long and varied history in ultracold atomic physics. One such new geometry is that of a bubble, where a condensate would be confined to the surface of an ellipsoidal shell. Study of this geometry would give insight into new collective modes, self-interference effects, topology-dependent vortex behavior, dimensionality crossovers from thick to thin shells, and the properties of condensates pushed into the ultradilute limit. Here we propose to implement a realistic experimental framework for generating shell-geometry BEC using radiofrequency dressing of magnetically trapped samples. Such a tantalizing state of matter is inaccessible terrestrially due to the distorting effect of gravity on experimentally feasible shell potentials. The debut of an orbital BEC machine (NASA Cold Atom Laboratory, aboard the International Space Station) has enabled the operation of quantum-gas experiments in a regime of perpetual freefall, and thus has permitted the planning of microgravity shell-geometry BEC experiments. We discuss specific experimental configurations, applicable inhomogeneities and other experimental challenges, and outline potential experiments.
We present a pedagogical introduction to Bose–Einstein condensation in traps with spherical symmetry, namely, the spherical box and the thick shell, sometimes called bubble trap. In order to obtain the critical temperature for Bose–Einstein condensation, we describe how to calculate the cumulative state number and density of states in these geometries, using numerical and analytical (semi-classical) approaches. The differences in the results of both methods are a manifestation of Weyl's theorem, i.e., they reveal how the geometry of the trap (boundary condition) affects the number of the eigenstates counted. Using the same calculation procedure, we analyzed the impact of going from three-dimensions to two-dimensions, as we move from a thick shell to a two-dimensional shell. The temperature range we obtained, for the most commonly used atomic species and reasonable confinement volumes, is compatible with current cold atom experiments, which demonstrates that these trapping potentials may be employed in experiments.
The recent developments of microgravity experiments with ultracold atoms have produced a relevant boost in the study of shell-shaped ellipsoidal Bose-Einstein condensates. For realistic bubble-trap parameters, here we calculate the critical temperature of Bose-Einstein condensation, which, if compared to the one of the bare harmonic trap with the same frequencies, shows a strong reduction. We simulate the zero-temperature density distribution with the Gross-Pitaevskii equation, and we study the free expansion of the hollow condensate. While part of the atoms expands in the outward direction, the condensate self-interferes inside the bubble trap, filling the hole in experimentally observable times. For a mesoscopic number of particles in a strongly interacting regime, for which more refined approaches are needed, we employ quantum Monte Carlo simulations, proving that the nontrivial topology of a thin shell allows superfluidity. Our work constitutes a reliable benchmark for the forthcoming scientific investigations with bubble traps.
We discuss a method to create two-dimensional (2D) traps as well as atomic shell, or bubble, states for a Bose-Einstein condensate initially prepared in a conventional magnetic trap. The scheme relies on the use of time-dependent, radio-frequency-induced adiabatic potentials. These are shown to form a versatile and robust tool to generate interesting trapping potentials. Our shell states take the form of thin, highly stable matter-wave bubbles and can serve as stepping stones to prepare atoms in highly excited trap eigenstates or to study ``collapse and revival phenomena.'' Their creation requires gravitational effects to be compensated by applying additional optical dipole potentials. However, in our scheme gravitation can also be exploited to provide a route to two-dimensional atom trapping. We demonstrate the loading process for such a trap and examine experimental conditions under which a 2D condensate may be prepared.