Phonons, the ubiquitous quanta of vibrational energy, play a vital role in the performance of quantum technologies. Conversely, unintended coupling to phonons degrades qubit performance and can lead to correlated errors in superconducting qubit systems. Regardless of whether phonons play an enabling or deleterious role, they do not typically admit control over their spectral properties, nor the possibility of engineering their dissipation to be used as a resource. Here we show that coupling a superconducting qubit to a bath of piezoelectric surface acoustic wave phonons enables a novel platform for investigating open quantum systems. By shaping the loss spectrum of the qubit via the bath of lossy surface phonons, we demonstrate preparation and dynamical stabilization of superposition states through the combined effects of drive and dissipation. These experiments highlight the versatility of engineered phononic dissipation and advance the understanding of mechanical losses in superconducting qubit systems.Phonons, the ubiquitous quanta of vibrational energy, play a vital role in the performance of quantum technologies. Conversely, unintended coupling to phonons degrades qubit performance and can lead to correlated errors in superconducting qubit systems. Regardless of whether phonons play an enabling or deleterious role, they do not typically admit control over their spectral properties, nor the possibility of engineering their dissipation to be used as a resource. Here we show that coupling a superconducting qubit to a bath of piezoelectric surface acoustic wave phonons enables a novel platform for investigating open quantum systems. By shaping the loss spectrum of the qubit via the bath of lossy surface phonons, we demonstrate preparation and dynamical stabilization of superposition states through the combined effects of drive and dissipation. These experiments highlight the versatility of engineered phononic dissipation and advance the understanding of mechanical losses in superconducting qubit systems.

Nature CommunicationsJul 3, 202331 citations

Interface Piezoelectric Loss in Superconducting Qubits

Haoxin Zhou, Kangdi Yu, Yashwanth Balaji +5 more

Dissipation remains a central obstacle to improving superconducting quantum circuits, yet the microscopic origins of loss in widely used materials platforms are not fully understood. Here, we report the observation of interface piezoelectricity-induced dissipation in superconducting qubits fabricated on high-resistivity silicon. Our devices use a transmon qubit with a shunt capacitor that simultaneously serves as an interdigital transducer embedded in a surface acoustic wave resonator. By tuning the qubit transition into resonance with discrete mechanical modes, we observe up to a factor-of-two reduction in qubit lifetime, consistent with energy exchange between the qubit and mechanical modes mediated by piezoelectric coupling at the aluminum-silicon interface. Our findings provide direct evidence for interface piezoelectricity as a distinct loss channel in superconducting qubits. Combined with multiphysics simulations, these findings suggest that interface piezoelectric loss can dominate over loss from two-level systems at sufficiently high frequencies.Dissipation remains a central obstacle to improving superconducting quantum circuits, yet the microscopic origins of loss in widely used materials platforms are not fully understood. Here, we report the observation of interface piezoelectricity-induced dissipation in superconducting qubits fabricated on high-resistivity silicon. Our devices use a transmon qubit with a shunt capacitor that simultaneously serves as an interdigital transducer embedded in a surface acoustic wave resonator. By tuning the qubit transition into resonance with discrete mechanical modes, we observe up to a factor-of-two reduction in qubit lifetime, consistent with energy exchange between the qubit and mechanical modes mediated by piezoelectric coupling at the aluminum-silicon interface. Our findings provide direct evidence for interface piezoelectricity as a distinct loss channel in superconducting qubits. Combined with multiphysics simulations, these findings suggest that interface piezoelectric loss can dominate over loss from two-level systems at sufficiently high frequencies.

quant-pharXiv:2605.15554May 18, 20260 citations

Observation of Interface Piezoelectricity in Superconducting Devices on Silicon

Haoxin Zhou, Li, Eric, Kadircan Godeneli +7 more

The evolution of superconducting quantum processors is driven by the need to reduce errors and scale for fault-tolerant computation. Reducing physical qubit error rates requires further advances in the microscopic modeling and control of decoherence mechanisms in superconducting qubits. Piezoelectric interactions contribute to decoherence by mediating energy exchange between microwave photons and acoustic phonons. Centrosymmetric materials like silicon and sapphire do not display piezoelectricity and are the preferred substrates for superconducting qubits. However, the broken centrosymmetry at material interfaces may lead to piezoelectric losses in qubits. While this loss mechanism was predicted two decades ago, interface piezoelectricity has not been experimentally observed in superconducting devices. Here, we report the observation of interface piezoelectricity at an aluminum-silicon junction and show that it constitutes an important loss channel for superconducting devices. We fabricate aluminum interdigital surface acoustic wave transducers on silicon and demonstrate piezoelectric transduction from room temperature to millikelvin temperatures. We find an effective electromechanical coupling factor of $K^2\approx 2 \times 10^{-5}\%$ comparable to weakly piezoelectric substrates. We model the impact of the measured interface piezoelectric response on superconducting qubits and find that the piezoelectric surface loss channel limits qubit quality factors to $Q\sim10^4-10^8$ for designs with different surface participation ratios and electromechanical mode matching. These results identify electromechanical surface losses as a significant dissipation channel for superconducting qubits, and show the need for heterostructure and phononic engineering to minimize errors in next-generation superconducting qubits.The evolution of superconducting quantum processors is driven by the need to reduce errors and scale for fault-tolerant computation. Reducing physical qubit error rates requires further advances in the microscopic modeling and control of decoherence mechanisms in superconducting qubits. Piezoelectric interactions contribute to decoherence by mediating energy exchange between microwave photons and acoustic phonons. Centrosymmetric materials like silicon and sapphire do not display piezoelectricity and are the preferred substrates for superconducting qubits. However, the broken centrosymmetry at material interfaces may lead to piezoelectric losses in qubits. While this loss mechanism was predicted two decades ago, interface piezoelectricity has not been experimentally observed in superconducting devices. Here, we report the observation of interface piezoelectricity at an aluminum-silicon junction and show that it constitutes an important loss channel for superconducting devices. We fabricate aluminum interdigital surface acoustic wave transducers on silicon and demonstrate piezoelectric transduction from room temperature to millikelvin temperatures. We find an effective electromechanical coupling factor of $K^2\approx 2 \times 10^{-5}\%$ comparable to weakly piezoelectric substrates. We model the impact of the measured interface piezoelectric response on superconducting qubits and find that the piezoelectric surface loss channel limits qubit quality factors to $Q\sim10^4-10^8$ for designs with different surface participation ratios and electromechanical mode matching. These results identify electromechanical surface losses as a significant dissipation channel for superconducting qubits, and show the need for heterostructure and phononic engineering to minimize errors in next-generation superconducting qubits.

arXiv:2409.10626Sep 16, 20240 citations

Decoherence of surface phonons in a quantum acoustic system

C. Undershute, J. M. Kitzman, Camille A. Mikolas +1 more

Phononic resonators are becoming increasingly important in quantum information science, both for applications in quantum computing, communication, and sensing as well as in experiments investigating fundamental physics. Here, we study the decoherence of phonons confined in a surface acoustic wave (SAW) resonator strongly coupled $(g/2\ensuremath{\pi}\ensuremath{\approx}9\phantom{\rule{0.16em}{0ex}}\mathrm{MHz})$ to a superconducting transmon qubit. By comparing experimental data with numerical solutions to the Markovian master equation, we report a surface phononic energy decay rate of ${\ensuremath{\kappa}}_{1}/2\ensuremath{\pi}=480\phantom{\rule{0.16em}{0ex}}\mathrm{kHz}$ and a pure dephasing rate of ${\ensuremath{\kappa}}_{\ensuremath{\phi}}/2\ensuremath{\pi}=180\phantom{\rule{0.16em}{0ex}}\mathrm{kHz}$. These rates are in good agreement with the level of decoherence we extract from qubit-assisted spectroscopic measurements of the SAW resonator. We additionally find that the timescales over which coherent driven dynamics and decoherence occur are comparable, highlighting the need to model the composite device as an open quantum system. We discuss possible sources of decoherence in SAW-based quantum acoustic devices and the application of these devices in future quantum acoustic dissipation engineering experiments. The decoherence characterization techniques we employ are broadly applicable for investigating and benchmarking the effects of loss and dephasing on mechanical resonators in the quantum regime.Phononic resonators are becoming increasingly important in quantum information science, both for applications in quantum computing, communication, and sensing as well as in experiments investigating fundamental physics. Here, we study the decoherence of phonons confined in a surface acoustic wave (SAW) resonator strongly coupled $(g/2\ensuremath{\pi}\ensuremath{\approx}9\phantom{\rule{0.16em}{0ex}}\mathrm{MHz})$ to a superconducting transmon qubit. By comparing experimental data with numerical solutions to the Markovian master equation, we report a surface phononic energy decay rate of ${\ensuremath{\kappa}}_{1}/2\ensuremath{\pi}=480\phantom{\rule{0.16em}{0ex}}\mathrm{kHz}$ and a pure dephasing rate of ${\ensuremath{\kappa}}_{\ensuremath{\phi}}/2\ensuremath{\pi}=180\phantom{\rule{0.16em}{0ex}}\mathrm{kHz}$. These rates are in good agreement with the level of decoherence we extract from qubit-assisted spectroscopic measurements of the SAW resonator. We additionally find that the timescales over which coherent driven dynamics and decoherence occur are comparable, highlighting the need to model the composite device as an open quantum system. We discuss possible sources of decoherence in SAW-based quantum acoustic devices and the application of these devices in future quantum acoustic dissipation engineering experiments. The decoherence characterization techniques we employ are broadly applicable for investigating and benchmarking the effects of loss and dephasing on mechanical resonators in the quantum regime.

arXiv:2410.03005Physical Review AJan 13, 20254 citations

Acoustic radiation from a superconducting qubit: From spontaneous emission to Rabi oscillations

Vijay Jain, Vladislav D. Kurilovich, Yanni D. Dahmani +6 more

Acoustic spontaneous emission into bulk dielectrics can be a strong source of decoherence in quantum devices, especially when a qubit is in the presence of piezoelectric materials. We study the dynamics of a qubit coupled to an acoustic resonator by a piezoelectric film. By varying the surface topography of the resonator from rough to polished to shaped, we explore the crossover from fast decay of an excited qubit to quantum-coherent coupling between the qubit and an isolated phonon mode. Our experimental approach may be used for precision measurements of crystalline vibrations, the design of quantum memories, and the study of electro-mechanical contributions to dielectric loss.Acoustic spontaneous emission into bulk dielectrics can be a strong source of decoherence in quantum devices, especially when a qubit is in the presence of piezoelectric materials. We study the dynamics of a qubit coupled to an acoustic resonator by a piezoelectric film. By varying the surface topography of the resonator from rough to polished to shaped, we explore the crossover from fast decay of an excited qubit to quantum-coherent coupling between the qubit and an isolated phonon mode. Our experimental approach may be used for precision measurements of crystalline vibrations, the design of quantum memories, and the study of electro-mechanical contributions to dielectric loss.

arXiv:2211.07475Nov 14, 20220 citations

Observation of interface piezoelectricity in superconducting devices on silicon

Haoxin Zhou, Eric Li, Kadircan Godeneli +7 more

Abstract The development of superconducting quantum processors relies on understanding and mitigating decoherence in superconducting qubits. Piezoelectric coupling contributes to decoherence by mediating energy exchange between microwave photons and acoustic phonons. Although bulk centrosymmetric materials like silicon and sapphire are non-piezoelectric and commonly used as qubit substrates, the lack of centrosymmetry at interfaces may induce piezoelectric losses. This effect was predicted decades ago but never experimentally observed in superconducting devices. Here, we report interface piezoelectricity at aluminum-silicon junctions and demonstrate it as a significant loss channel in superconducting devices. Using aluminum interdigital transducers on silicon, we observe piezoelectric transduction from room to millikelvin temperatures, with an effective electromechanical coupling factor K 2 ≈ (3 ± 0.4) × 10 −5 %, comparable to weakly piezoelectric substrates. Modeling shows this mechanism limits qubit quality factors to Q ~ 10 4 − 10 8 , depending on surface participation and mode matching. These findings reveal interface piezoelectricity as a major dissipation channel and highlight the need for heterostructure and phononic engineering in next-generation superconducting qubits.Abstract The development of superconducting quantum processors relies on understanding and mitigating decoherence in superconducting qubits. Piezoelectric coupling contributes to decoherence by mediating energy exchange between microwave photons and acoustic phonons. Although bulk centrosymmetric materials like silicon and sapphire are non-piezoelectric and commonly used as qubit substrates, the lack of centrosymmetry at interfaces may induce piezoelectric losses. This effect was predicted decades ago but never experimentally observed in superconducting devices. Here, we report interface piezoelectricity at aluminum-silicon junctions and demonstrate it as a significant loss channel in superconducting devices. Using aluminum interdigital transducers on silicon, we observe piezoelectric transduction from room to millikelvin temperatures, with an effective electromechanical coupling factor K 2 ≈ (3 ± 0.4) × 10 −5 %, comparable to weakly piezoelectric substrates. Modeling shows this mechanism limits qubit quality factors to Q ~ 10 4 − 10 8 , depending on surface participation and mode matching. These findings reveal interface piezoelectricity as a major dissipation channel and highlight the need for heterostructure and phononic engineering in next-generation superconducting qubits.

Nature CommunicationsDec 5, 20253 citations

K^2\approx 2 \times 10^{-5}\%

comparable to weakly piezoelectric substrates. We model the impact of the measured interface piezoelectric response on superconducting qubits and find that the piezoelectric surface loss channel limits qubit quality factors to

Q\sim10^4-10^8

for designs with different surface participation ratios and electromechanical mode matching. These results identify electromechanical surface losses as a significant dissipation channel for superconducting qubits, and show the need for heterostructure and phononic engineering to minimize errors in next-generation superconducting qubits.