High-fidelity single- and multiqubit operations compose the backbone of quantum information processing. This fidelity is based on the ability to couple single- or two-qubit levels in an extremely coherent and precise manner. A necessary condition for coherent quantum evolution is a highly stable local oscillator driving these transitions. Here we study the effect of fast noise, that is, noise at frequencies much higher than the local oscillator linewidth, on the fidelity of one- and two-qubit gates in a trapped-ion system. We analyze and measure the effect of fast noise on single-qubit operations, including resonant $\ensuremath{\pi}$ rotations and off-resonant sideband transitions. We further numerically analyze the effect of fast phase noise on the M\o{}lmer-S\o{}rensen two-qubit gate. We find a unified and simple way to estimate the performance of all of these operations through a single parameter given by the noise power spectral density at the qubit response frequency. While our analysis focuses on phase noise and on trapped-ion systems, it is relevant for other sources of fast noise as well as for other qubit systems in which spinlike qubits are coupled by a common bosonic field. Our analysis can help in guiding the design of quantum hardware platforms and gates, improving their fidelity towards fault-tolerant quantum computing.
High-fidelity single- and multiqubit operations compose the backbone of quantum information processing. This fidelity is based on the ability to couple single- or two-qubit levels in an extremely coherent and precise manner. A necessary condition for coherent quantum evolution is a highly stable local oscillator driving these transitions. Here we study the effect of fast noise, that is, noise at frequencies much higher than the local oscillator linewidth, on the fidelity of one- and two-qubit gates in a trapped-ion system. We analyze and measure the effect of fast noise on single-qubit operations, including resonant \ensuremathπ rotations and off-resonant sideband transitions. We further numerically analyze the effect of fast phase noise on the M\o{}lmer-S\o{}rensen two-qubit gate. We find a unified and simple way to estimate the performance of all of these operations through a single parameter given by the noise power spectral density at the qubit response frequency. While our analysis focuses on phase noise and on trapped-ion systems, it is relevant for other sources of fast noise as well as for other qubit systems in which spinlike qubits are coupled by a common bosonic field. Our analysis can help in guiding the design of quantum hardware platforms and gates, improving their fidelity towards fault-tolerant quantum computing.
High-fidelity two-qubit entangling gates are essential for the realization of useful quantum algorithms on quantum processors. The Mølmer-Sørensen (MS) gate has become a common choice for trapped-ion quantum computing due to its resilience to ion temperature and its demonstrated record fidelities. However, the spectral impurity of the driving laser field impacts gate performance, with phase noise influencing the qubit dynamics through mechanisms operating on different timescales. In this work, we present a comprehensive theoretical analysis of laser phase noise in the MS gate, identifying two spectral ranges which influence the gate fidelity the most: "fast" noise at frequencies near the motional mode spectrum, and "slow" noise at frequencies on the order of the inverse gate time. We derive the noise Hamiltonians for two common laser beam geometries and obtain analytical expressions for the average gate error in terms of the laser noise power spectral density and gate parameters. For slowly varying noise spectra, we provide simplified error estimates. In addition, we validate our findings against previously published numerical simulations.
High-fidelity two-qubit gates in quantum computers are often hampered by fluctuating experimental parameters. The effects of time-varying parameter fluctuations lead to coherent noise on the qubits, which can be suppressed by designing control signals with appropriate filter functions. Here, we develop filter functions for M\o{}lmer-S\o{}rensen gates of trapped-ion quantum computers that accurately predict the change in gate error due to small parameter fluctuations at any frequency. We then design the filter functions of frequency-modulated laser pulses, and compare this method with pulses that are robust to static offsets of the motional-mode frequencies. Experimentally, we measure the noise spectrum of the motional modes and use it for designing the filter functions, which improves the gate fidelity from 99.23(7)% to 99.55(7)% in a five-ion chain.
High-fidelity two-qubit entangling gates play an important role in many quantum information processing tasks and are a necessary building block for constructing a universal quantum computer. Such high-fidelity gates have been demonstrated on trapped-ion qubits; however, control errors and noise in gate parameters may still lead to reduced fidelity. Here we propose and demonstrate a general family of two-qubit entangling gates which are robust to different sources of noise and control errors. These gates generalize the renowned Mølmer-Sørensen gate by using multitone drives. We experimentally implemented several of the proposed gates on ^{88}Sr^{+} ions trapped in a linear Paul trap and verified their resilience.
Electron spins trapped in quantum dots have recently proven to be a promising technology for the implementation of qubits, already demonstrating high fidelity single- and two-qubits gates. The next step towards fault-tolerant quantum computing is to increase the number of so-called spin qubits on the processor. However, this poses several challenges, one of which being how to implement single-qubit gates in multi-qubit systems, with high fidelity. This work focused on two aspects. The first one was to identify the physical phenomena and limitations that hinder the realisation of high fidelity single-qubit gates in multi-qubit environments. The second objective was to investigate, implement and optimise methods in order to minimise the impact of these perturbing phenomena. The identified perturbing effects include unwanted driving between a pulse and the neighbouring qubits, as well as frequency shifts induced by drive-spin coupling and non-ideal pulse in experimental setups. Crosstalk was addressed using pulse shaping (i.e. amplitude or phase modulation of the driving pulse to tailor its spectral characteristics and reduce the energy transmitted at unwanted frequencies). The performance of shapes taken from both NMR and signal processing literature was investigated, for various pulse parameters, through an extensive grid search. In addition, a frequency correction algorithm was devised: off-resonant drive frequencies are selected so that the shifted qubits are resonantly driven. It currently accounts for two phenomena: the AC Stark and Bloch-Siegert shifts. The algorithm furthermore tracks the changes caused by the time-dependent characteristics of the shaped pulses. The proposed frequency correction algorithm was shown to almost entirely negate the effects of the considered shifts, leading to unitary fidelity improvements by up to 55%. In addition, pulse shaping was demonstrated to noticeably improve the fidelity of simultaneous single-qubit rotations compared to unshaped driving. Rotations with fidelities as high as 99.98% were obtained for pi/2 rotations on two-qubits systems. Moreover, shapes whose Fourier transform is narrow and sharp, associated with low Rabi frequencies, were demonstrated to generally provide the highest fidelities of the tested configurations. Lastly, the trends and guidelines highlighted by these results were shown to scale to systems with larger numbers of qubits. The correction techniques investigated in this work have proven promising for the implementation of high fidelity single-qubit gates in multi-qubit systems. In particular, the guidelines for selecting a well-performing pulse shape should also be useful for the design of optimised driving schemes, regardless of the number of qubits involved. Additionally, the proposed frequency shift correction algorithm is expected to be able to handle arbitrary shifts, and so to be easily adaptable to use in experiments.
We present novel techniques for modelling and mitigating the effects of time-dependent noise created by interactions between a quantum system and its environment, and by errors in applied controls. Our scope encompasses quantum storage and nontrivial QIP tasks in both single- and multi-qubit systems, with a particular focus on control operations applied to trapped-ion qubits. The work begins with the introduction of a computationally efficient approach to characterizing the impact of time-dependent noise in single-qubit systems, in terms of the spectral characteristics of the noise and a set of generalized control filter functions. In conjunction with brute-force numerical simulation, we show that this novel analytical technique can used to model the evolution of a noisy single-qubit system subject to an arbitrary piecewise-constant control sequence, and to accurately predict the effects of experimentally engineered noise in single-qubit trapped ion systems. We also obtain a number of new and important results that extend the range of utility of state-preserving dynamical decoupling control sequences. These device-independent results provide a means to create a practically useful high-fidelity, long-time quantum memory in both single- and multi-qubit systems. We go on to explain how, given the freedom to arbitrarily and quasi-instantaneously change the phase of the interaction between a system of qubits and a finite collection of oscillators, frequency-specific phase modulation protocols can be implemented that decouple the qubits from targeted oscillator modes at pre-determined times. This technique can be used to generate fast, high-fidelity multi-qubit entangling operations in, for example, ion trap QIP devices.
Abstract As qubit decoherence times are increased and readout technologies are improved, nonidealities in the drive signals, such as phase noise, are going to represent a crucial limitation to the fidelity achievable at the end of complex control pulse sequences. While prior studies have addressed the impact of reference oscillator phase noise on qubit performance, its interaction with realistic control pulses and its role in fidelity degradation have not been examined in sufficient detail. Furthermore, previous analyses grounded in the filter-function formalism identify high-frequency spectral components as the dominant source of fidelity loss, a conclusion that has also been used as a compelling marketing feature by some hardware vendors. Here we reevaluate this assertion by means of direct time-domain numerical simulations, in which phase noise realizations with a given power spectral density are applied to the carrier of realistic control pulse sequences, and the resulting qubit evolution is computed with Qiskit-Dynamics and averaged over multiple noise realizations. We show that the claimed dominance of high-frequency components originates from an oversight in interpreting the conversion between the phase-noise and the frequency-noise power spectral densities: at equal power, the components close to the Rabi frequency are by far the most detrimental, while those far from the carrier act only marginally, mainly through residual amplitude modulation. We performed an analysis using both two- and three-level models, the latter capturing leakage outside the computational subspace. We further show that, for realistic phase noise spectra of local oscillators, whose power is concentrated in the low-offset region, the fidelity loss is dominated by such high-power low-frequency components.