Quantum parametric amplifiers typically generate by operating in proximity to a point of dynamical instability. We consider an alternate general strategy where quantum-limited, large-gain amplification is achieved without any proximity to a dynamical instability. Our basic mechanism (involving dynamics that conserves the number of squeezed photons) enables the design of a variety of one and two mode amplifiers that are not limited by any fundamental gain-bandwidth constraint. We focus on a particular realization that allows us to realize an ideal single-mode squeezing operation in transmission, and which has zero reflection. We present both a thorough theoretical analysis of this system (including pump-depletion effects), and also discuss results of an experimental superconducting quantum circuit implementation.
Quantum parametric amplifiers typically generate by operating in proximity to a point of dynamical instability. We consider an alternate general strategy where quantum-limited, large-gain amplification is achieved without any proximity to a dynamical instability. Our basic mechanism (involving dynamics that conserves the number of squeezed photons) enables the design of a variety of one and two mode amplifiers that are not limited by any fundamental gain-bandwidth constraint. We focus on a particular realization that allows us to realize an ideal single-mode squeezing operation in transmission, and which has zero reflection. We present both a thorough theoretical analysis of this system (including pump-depletion effects), and also discuss results of an experimental superconducting quantum circuit implementation.
Linear parametric amplification is a key operation in information processing. Our interest here is quantum-limited parametric amplification, i.e., amplification of quantum signals while adding the minimum amount of noise allowed by quantum mechanics, which is essential for any viable implementation of quantum information processing. We describe parametric amplifiers based on the dispersive nonlinearity of Josephson junctions driven with appropriate tones playing the role of pumps. We discuss two defining characteristics in the architecture of these amplifiers: the number of modes occupied by the signal, idler, and pump waves and the number of independent ports through which these waves enter into the circuit. The scattering properties of these amplifiers are also reviewed. The main focus of this work are the computations of the dynamic range and phase-space distributions of the fluctuations of the modes of the amplifiers.
One of the primary requirements for superconducting quantum information processors is high-fidelity, quantum non-demolition qubit readout. In superconducting circuits, we perform measurements with quantum-limited microwave amplifiers. These amplifiers are based on microwave cavities and powered by Josephson-junction based nonlinearities, which we drive to parametrically modulate the circuit and generate gain. However, cavity-based amplifiers generally suffer from a fixed gain-bandwidth product, a limited dynamic range, and the absence of directionality, and so they must be operated with external lossy microwave commercial components such as circulators. Many of these limitations can be circumvented by combining multiple parametric processes in a few-mode device, in particular by combining parametric drives which produce gain and those which produce gainless photon conversion. By combining balanced gain and conversion processes between a pair of modes, we have demonstrated transmission-only, phase-sensitive, gain-bandwidth-free amplification. We have also used measurements of transmon qubits with this mode of amplification to demonstrate its practical utility. More, by combining multiple instances of imbalanced gain and conversion processes among three modes, we have realized devices with non-reciprocal, transmission-only amplification, matched ports, and a large, gain-independent bandwidth. One of the biggest challenges in tuning multiple parametric processes is both inherent and dynamically-generated higher order nonlinearities in the device, which shift mode frequencies and parametric coupling strengths with pump power, preventing accurate balancing of the parametric processes. These can be controlled through engineering the Hamiltonian of the nonlinear element, in this thesis either a linearly-shunted Josephson Ring Modulator or SNAIL (Superconducting Nonlinear Asymmetric Inductive eLements), which for certain applied flux values can minimize or even change the sign of higher-order even nonlinearities. Additionally, we have explored a range of circuit parameters, allowing us to also control the relative size of odd-order nonlinearities. We have developed a series of prototypes which implement these concepts, and have achieved both high-dynamic range singly pumped amplifiers, and a promising platform for multi-parametric devices. We conclude by presenting recent progress towards implementing multiple parametric schemes that generates a practical directional amplifier, and discuss the remaining obstacles to a truly ideal parametric amplifiers.
Superconducting standing−wave parametric amplifiers are crucial for the readout of microwave quantum devices. Despite significant improvements in recent years, the need to operate near an instability point imposes a fundamental constraint: the instantaneous bandwidth decreases with increasing amplifier gain. Here we show that it is possible to obtain parametric amplification without instability by using two simultaneous drives that activate phase-preserving gain and frequency conversion. Realized in a granular aluminum dimer with Kerr nonlinearity, our method demonstrates a sixfold bandwidth increase at 20 dB gain, surpasses the conventional gain−bandwidth scaling up to 25 dB, and remains near the quantum limit.
We describe a new kind of phase-preserving quantum amplifier which utilizes dissipative interactions in a parametrically coupled three-mode bosonic system. The use of dissipative interactions provides a fundamental advantage over standard cavity-based parametric amplifiers: large photon number gains are possible with quantum-limited added noise, with no limitation on the gain-bandwidth product. We show that the scheme is simple enough to be implemented both in optomechanical systems and in superconducting microwave circuits.
One of the central challenges in the development of parametric amplifiers is the control of the dynamic range relative to its gain and bandwidth, which typically limits quantum limited amplification to signals which contain only a few photons per inverse bandwidth. Here, we discuss the control of the dynamic range of Josephson parametric amplifiers by using Josephson junction arrays. We discuss gain, bandwidth, noise, and dynamic range properties of both a transmission line and a lumped element based parametric amplifier. Based on these investigations we derive useful design criteria, which may find broad application in the development of practical parametric amplifiers.
One of the central challenges in the development of parametric amplifiers is the control of the dynamic range relative to its gain and bandwidth, which typically limits quantum limited amplification to signals which contain only a few photons per inverse bandwidth. Here, we discuss the control of the dynamic range of Josephson parametric amplifiers by using Josephson junction arrays. We discuss gain, bandwidth, noise, and dynamic range properties of both a transmission line and a lumped element based parametric amplifier. Based on these investigations we derive useful design criteria, which may find broad application in the development of practical parametric amplifiers.