One of the first practical applications of quantum computers is expected to be molecular modelling. Performing this task would profoundly affect areas such as chemistry, materials science and drug synthesis. Modelling of molecules, which are classically intractable, can be achieved with just over
30 qubits, whereas state of the art quantum computers already have more than
50 qubits. The Variational Quantum Eigensolver (VQE) algorithm and VQE based protocols, are promising candidates to enable this task on emerging Noisy Intermediate-Scale Quantum (NISQ) computers. These protocols require short quantum circuits and short coherence times, and are particularly resilient to quantum errors. Nevertheless, there is still a significant gap between the accuracy and the coherence times of current NISQ computers, and the hardware requirements of VQE protocols to simulate practically interesting molecules. In this thesis, I present my contribution to narrowing this gap by developing VQE protocols for molecular modelling that are less demanding on quantum hardware. The VQE relies on the Rayleigh-Ritz variational principle to estimate the eigenvalues of a Hamiltonian operator, by minimizing its expectation value with respect to a trial quantum state, prepared by an ansatz. A major challenge for the practical realisation of VQE protocols on NISQ computers is to construct an ansatz that: (1) can accurately approximate the eigenstates of the Hamiltonian; (2) is easy to optimize; and (3) can be implemented by a shallow circuit, within the capabilities of a NISQ computer. The most widely used, unitary coupled cluster (UCC), type of ans\"atze mathematically correspond to a product of unitary evolutions of fermionic excitation operators. Owing to their fermionic structure, UCC ans\"atze preserve the symmetries of electronic wavefunctions, and thus are accurate and easy to optimize. Nevertheless, UCC ans\"atze are implemented by high depth circuits, which severely limit the size of the molecules that can be reliably simulated on NISQ computers. In this thesis, I begin by constructing efficient quantum circuits to perform evolutions of fermionic excitation operators. The circuits are optimized in the number of two-qubit entangling gates, which are the current bottleneck of NISQ computers. Compared to the standard circuits used to implement evolutions of fermionic excitation operators, the circuits derived in this thesis reduce the number of two-qubit entangling gates by more than
70% on average. As an intermediate result, I also derive efficient circuits to perform evolutions of qubit excitation operators (excitation operators that account for qubit, rather than fermionic commutation relations). Even with the fermionic-excitation-evolution circuits derived here, UCC ans\"atze still require very long circuits, with a particularly large number of two-qubit entangling gates. In this thesis, I consider the use of alternative VQE ans\"atze, based on evolutions of qubit excitation operators. Due to not accounting for fermionic anticommutation, evolutions of qubit excitation operators can be performed by circuits that require asymptotically fewer two-qubit entangling gates. Furthermore, qubit excitation operators preserve many of the physical properties of fermionic excitation operators. Performing a number of classical numerical VQE simulations for small molecules, I show that qubit-excitation-based ans\"atze can approximate molecular electronic wavefunctions almost as accurately as fermionic-excitation-based ans\"atze. Hence, I argue that evolutions of qubit excitation operators are more suitable to construct molecular ans\"atze than evolutions of fermionic excitation operators, especially in the era of NISQ computers. Motivated by the advantage of qubit-excitation-based ans\"atze, I introduce the qubit-excitation-based adaptive variational quantum eigensolver (QEB-ADAPT-VQE). The QEB-ADAPT-VQE belongs to a family of ADAPT-VQE protocols for molecular modelling that grow a problem-tailored ansatz by iteratively appending unitary operators sampled from a predefined finite-size pool of operators. The operator at each iteration is sampled based on an ansatz-growing strategy, which aims to achieve the lowest estimate for the Hamiltonian expectation value at each iteration. In this way, ADAPT-VQE protocols construct shallow-circuit, few-parameter ans\"atze tailored specifically to the molecular systems of interest. In the case of the QEB-ADAPT-VQE, the operator pool is defined by a set of evolutions of single and double qubit excitation operators. I benchmark the performance of the QEB-ADAPT-VQE, by performing classical numerical simulations. I demonstrate that it can construct ans\"atze that are several orders of magnitude more accurate, and require significantly shallower circuits, than standard UCC ans\"atze. I also compare the QEB-ADAPT-VQE against the original fermionic-ADAPT-VQE, which utilizes a pool of fermionic excitation evolutions, and the qubit-ADAPT-VQE, which utilizes a pool of Pauli-string evolutions. I demonstrate that, in terms of circuit efficiency and convergence speed, the QEB-ADAPT-VQE systematically outperforms the qubit-ADAPT-VQE, which to my knowledge was the previous most circuit-efficient, scalable VQE protocol for molecular modeling. The QEB-ADAPT-VQE protocol, therefore represents a significant improvement in the field of VQE protocols for molecular modelling and brings us closer to achieving practical quantum advantage. Lastly, I outline a modified version of the QEB-ADAPT-VQE, the excited-QEB-ADAPT-VQE, designed to estimate energies of excited molecular states. The excited-QEB-ADAPT-VQE is more robust to initial simulation conditions, at the expense of increased computational complexity.
Quantum computing has emerged as a transformative approach for tackling complex problems in quantum chemistry, particularly in simulating multielectron systems and electron-phonon interactions. However, the current noisy intermediate-scale quantum (NISQ) devices face significant challenges in implementing practical quantum algorithms due to error accumulation caused by increased circuit depth, qubit counts, and gate operations. To address these challenges, we present TenCirChem, an open-source Python package specifically designed for implementing variational quantum algorithms in quantum computational chemistry. TenCirChem demonstrates exceptional performance in simulating unitary coupled-cluster circuits through its innovative use of compact representations for quantum states and excitation operators. This package supports noisy circuit simulation and provides advanced algorithms for variational quantum dynamics, enabling researchers to explore complex chemical phenomena. Its capabilities are exemplified in various applications, including the calculation of potential energy curves and the investigation of quantum gate error impacts on molecular systems. Moreover, TenCirChem’s seamless integration with real quantum hardware makes it a versatile tool for both simulation and experimentation. A key innovation developed within the TenCirChem framework is the Clifford-based Hamiltonian engineering approach for molecules (CHEM). This algorithm addresses the critical challenge of achieving chemical accuracy with shallow quantum circuits, a fundamental requirement for practical applications on NISQ devices. CHEM employs a sophisticated Clifford-based Hamiltonian transformation that operates within the variational quantum eigensolver (VQE) framework using hardware-efficient ansatz. The method ensures four crucial advantages: (1) generation of initial circuit parameters corresponding to Hartree-Fock energy, (2) maximization of initial energy gradients with respect to circuit parameters, (3) minimal classical processing overhead without additional quantum resource requirements, and (4) compatibility with any circuit topology. Through quantum hardware emulator demonstrations, CHEM has achieved chemical accuracy for systems up to 12 qubits with fewer than 30 two-qubit gates, representing a significant advancement in practical quantum computational chemistry. To enhance the efficiency of variational quantum algorithms, we developed the sequential optimization with approximate parabola (SOAP) method, specifically designed for parameter optimization in unitary coupled-cluster ansatz. SOAP addresses the critical bottleneck of measurement requirements in VQE by implementing an innovative optimization strategy that approximates the energy landscape as quadratic functions. This approach minimizes the number of energy evaluations while incorporating parameter correlations through the integration of average directions from previous iterations. Benchmark studies demonstrate SOAP’s superior performance, showing faster convergence and enhanced noise robustness compared to traditional optimization methods. The method’s scalability has been validated through numerical simulations of up to 20 qubits, and its practical efficacy has been confirmed through experiments on superconducting quantum computers. For simulating electron-phonon systems, we introduce a variational basis state encoding algorithm that significantly reduces resource requirements compared to conventional unary and binary encoding schemes. Our approach achieves smaller scaling than traditional methods for qubits and gates for systems obeying the area law of entanglement entropy, this remarkable reduction in resource requirements comes at the cost of a constant amount of additional measurements. The algorithm’s effectiveness has been validated through both numerical simulations and quantum hardware experiments, demonstrating that using just one or two qubits per phonon mode can produce quantitatively accurate results across various coupling regimes. The integration of these innovations within the TenCirChem library represents a significant advancement in quantum computational chemistry. The software package provides researchers with a comprehensive toolkit for developing, testing, and implementing quantum algorithms, while the novel methods address fundamental challenges in circuit depth, parameter optimization, and resource efficiency. These developments collectively enhance the practicality of quantum computing for addressing real-world chemical problems in the NISQ era, offering improved accuracy, efficiency, and noise robustness.
Quantum chemistry is one of the most promising applications of quantum computers in the near future. For noisy intermediate-scale quantum devices, the quantum-classical hybrid framework based on the variational quantum eigensolver (VQE) has become the method of choice. In the literature, there are many different variants of VQE, but it is not known which one is optimal for a given molecule. For this purpose, we perform a thorough benchmarking on more than ten different kinds of VQE ansatzes (in systems up to 30 qubits), based on their performance on the energy accuracy, runtime until convergence, and number of parameters. Our results show that the ADAPT ansatz can be used to obtain more accurate energy for small systems (below 14 qubits), but it costs much more computational resources. For larger molecules, UCCSD0 has better performance. However, all the tested ansatzes can hardly reach chemical accuracy at stretched bond lengths. Our results were obtained using MindSpore Quantum, where the codes and the benchmarking toolkit are publicly available at Gitee.
Variational quantum eigensolvers (VQEs) are among the most promising quantum algorithms for solving electronic structure problems in quantum chemistry, particularly during the noisy intermediate-scale quantum (NISQ) era. In this study, we investigate the capabilities and limitations of VQE algorithms implemented on current quantum hardware for determining molecular ground-state energies, focusing on the adaptive derivative-assembled pseudo-Trotter ansatz VQE (ADAPT-VQE). To address the significant computational challenges posed by molecular Hamiltonians, we explore various well known strategies to simplify the Hamiltonian, optimize the ansatz, and improve classical parameter optimization through modifications of the COBYLA optimizer. These enhancements are integrated into a tailored quantum computing implementation designed to minimize the circuit depth and computational cost. Using benzene as a benchmark system, we demonstrate the application of these optimizations on an IBM quantum computer. Despite these improvements, our results highlight the limitations imposed by current quantum hardware, particularly the impact of quantum noise on state preparation and energy measurement. The noise levels in today's devices prevent meaningful evaluations of molecular Hamiltonians with sufficient accuracy to produce reliable quantum chemical insights. Finally, we extrapolate the requirements for future quantum hardware to enable practical and scalable quantum chemistry calculations using VQE algorithms. This work provides an assessment of current quantum algorithms for molecular modeling on real quantum hardware, highlighting the impact of noise and hardware limitations on the achievable accuracy.
Abstract Variational quantum‐classical hybrid algorithms are emerging as important tools for simulating quantum chemistry with quantum devices. These algorithms can be applied to evaluate various molecular properties, including potential energy surfaces. Here in, recent progresses on the development of the so‐called variational quantum eigensolver (VQE) are surveyed. The eigensolver aims at reducing the consumption of quantum resources as much as possible. The key feature of VQE is that variation quantum states are optimized by a feedback process, where the measurement of the Hamiltonian is implemented term by term. This approach avoids the need of encoding all of the information about the molecular Hamiltonian in a quantum circuit. The VQE method is also compatible with classical methods in quantum chemistry, such as unitary coupled‐cluster ansatz. Furthermore, basic elements of VQE are covered, such as qubit encoding, mapping rules of the fermionic operators, ansatz preparation, together with several techniques for improving the performance, including constraining, and error mitigation.
We present a self-consistent field (SCF) approach within the adaptive derivative-assembled problem-tailored ansatz variational quantum eigensolver (ADAPT-VQE) framework for efficient quantum simulations of chemical systems on near-term quantum computers. To this end, our ADAPT-VQE-SCF approach combines the idea of generating an ansatz with a small number of parameters, resulting in shallow-depth quantum circuits with a direct minimization of an energy expression that is correct to second order with respect to changes in the molecular orbital basis. Our numerical analysis, including calculations for the transition-metal complex ferrocene [Fe (C 5 H 5 ) 2 ], indicates that convergence in the self-consistent orbital optimization loop can be reached without a considerable increase in the number of two-qubit gates in the quantum circuit by comparison to a VQE optimization in the initial molecular orbital basis. Moreover, the orbital optimization can be carried out simultaneously within each iteration of the ADAPT-VQE cycle. ADAPT-VQE-SCF thus allows us to implement a routine analogous to the complete active space SCF, a cornerstone of state-of-the-art computational chemistry, in a hardware-efficient manner on near-term quantum computers. Hence, ADAPT-VQE-SCF paves the way toward a paradigm shift for quantitative quantum-chemistry simulations on quantum computers by requiring fewer qubits and opening up for the use of large and flexible atomic orbital basis sets in contrast to earlier methods that are predominantly based on the idea of full active spaces with minimal basis sets.