Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2206.00802 · Journal of Chemical Theory and Computation

Optimized Quantum Phase Estimation for Simulating Electronic States in Various Energy Regimes

Christopher Kang, Nicholas P. Bauman, Sriram Krishnamoorthy, Karol Kowalski

Published Oct 6, 2022• 36 citations
arXivHTMLPDF

Abstract

While quantum algorithms for simulations exhibit better asymptotic scaling than their classical counterparts, they currently cannot be accurately implemented on real-world devices. Instead, chemists and computer scientists rely on costly classical simulations of these quantum algorithms. In particular, the quantum phase estimation (QPE) algorithm is among several approaches that has attracted much attention in recent years due to its genuine quantum character. However, it is memory-intensive to simulate and intractable for moderate system sizes. This paper discusses the performance and applicability of QPESIM, a new simulation of the QPE algorithm designed to take advantage of modest computational resources. In particular, we demonstrate the versatility of QPESIM in simulating various electronic states by examining the ground and core-level states of H 2 O. For these states, we also discuss the effect of the active-space size on the quality of the calculated energies. For the high-energy core-level states, we demonstrate that new QPE simulations for active spaces defined by 15 active orbitals significantly reduce the errors in core-level excitation energies compared to earlier QPE simulations using smaller active spaces.

DOI
10.1021/acs.jctc.2c00577

Related papers

Toward Quantum Computing for High-Energy Excited States in Molecular Systems: Quantum Phase Estimations of Core-Level States

Nicholas P. Bauman, Hongbin Liu, Eric J. Bylaska +9 more

This paper explores the utility of the quantum phase estimation (QPE) algorithm in calculating high-energy excited states characterized by the promotion of electrons occupying core-level shells. These states have been intensively studied over the last few decades, especially in supporting the experimental effort at light sources. Results obtained with QPE are compared with various high-accuracy many-body techniques developed to describe core-level states. The feasibility of the quantum phase estimator in identifying classes of challenging shake-up states characterized by the presence of higher-order excitation effects is discussed. We also demonstrate the utility of the QPE algorithm in targeting excitations from specific centers in a molecule. Lastly, we discuss how the lowest-order Trotter formula can be applied to reducing the complexity of the ansatz without affecting the error.

Journal of Chemical Theory and Computation•Dec 17, 2020•39 citations

Supramolecular approach-based intermolecular interaction energy calculations using quantum phase estimation algorithm

Yuhei Tachi, Akihiko Arakawa, Taisei Osawa +2 more

Accurate computation of non-covalent, intermolecular interaction energies is important to understand various chemical phenomena, and quantum computers are anticipated to accelerate it. Although the state-of-the-art quantum computers are still noisy and intermediate-scale ones, development of theoretical frameworks those are expected to work on a fault-tolerant quantum computer is an urgent issue. In this work, we explore resource-efficient implementation of the quantum phase estimation-based complete active space configuration interaction (QPE-CASCI) calculations, with the aid of the second-order Møller--Plesset perturbation theory (MP2)-based active space selection with Boys localized orbitals. We performed numerical simulations of QPE for the supramolecular approach-based intermolecular interaction energy calculations of the hydrogen-bonded water dimer, using 6 system and 6 ancilla qubits. With the aid of algorithmic error mitigation, the QPE-CASCI simulations achieved interaction energy predictions with an error of 0.02 kcal mol$^{-1}$ relative to the CASCI result, demonstrating the accuracy and efficiency of the proposed methodology. Preliminary results on quantum circuit compression for QPE are also presented to reduce the number of two-qubit gates and depth.

quant-pharXiv:2512.04587•Dec 5, 2025•0 citations

Improving the Runtime of Quantum Phase Estimation for Chemistry through Basis Set Optimization

Pauline J. Ollitrault, Jérôme F. Gonthier, Dario Rocca +5 more

High Resolution Image Download MS PowerPoint Slide Quantum phase estimation (QPE) is a promising quantum algorithm for obtaining molecular ground-state energies with chemical accuracy. However, its computational cost, dominated by the Hamiltonian 1-norm λ and the cost of the block encoding, scales at least quadratically with the number of molecular orbitals, making it challenging to incorporate dynamic correlation by enlarging the active space. In this work, we investigate two strategies to mitigate this cost through the optimization of the basis set. First, we investigate whether adjusting the coefficients of Gaussian basis functions can minimize the 1-norm while preserving the accuracy of the ground state energy. Although this method leads to a reduction in the 1-norm up to 10%, this reduction is system-dependent and diminishes with increasing molecular size. Second, we demonstrate that employing a large-basis-set frozen natural orbital (FNO) strategy results in a substantial reduction in QPE resources without compromising accuracy. We study a data set of 58 small organic molecules and the dissociation curve of N 2, and demonstrate that an active space constructed from orbitals derived from larger basis sets captures correlation effects more effectively. This approach yields up to an 80% reduction in the 1-norm λ and also leads to a 55% reduction in the number of orbitals. Our results highlight that improving the quality, not just the size, of the orbital basis is a viable strategy for extending QPE to include dynamical correlation, making progress toward scalable and chemically accurate quantum simulations with tractable resource requirements.

arXiv:2509.05733•Journal of Chemical Theory and Computation•Nov 20, 2025•2 citations

Enabling Chemically Accurate Quantum Phase Estimation in the Early Fault-Tolerant Regime

Shota Kanasugi, Riki Toshio, Kazunori Maruyama +1 more

Quantum simulation of molecular electronic structure is one of the most promising applications of quantum computing. However, achieving chemically accurate predictions for strongly correlated systems requires quantum phase estimation (QPE) on fault-tolerant quantum computing (FTQC) devices. Existing resource estimates for typical FTQC architectures suggest that such calculations demand millions of physical qubits, thereby placing them beyond the reach of near-term devices. Here, we investigate the feasibility of performing QPE for chemically relevant molecular systems in an early-FTQC regime, characterized by partial fault tolerance, constrained qubit budgets, and limited circuit depth. Our framework is based on single-ancilla, Trotter-based QPE implementations combined with partially randomized time evolution. Within this framework, we develop a novel Hamiltonian optimization strategy, termed unitary weight concentration, that reduces algorithmic cost by reshaping linear-combination-of-unitaries representations. Applying this framework to active-space models of iron-sulfur clusters, cytochrome P450 active sites, and CO$_2$-utilization catalysts, we perform end-to-end resource estimation using the latest version of the space-time efficient analog rotation (STAR) architecture. Our results indicate that ground-state energy estimation for active spaces of approximately 20 to 50 spatial orbitals, well beyond the reach of classical full configuration interaction, is achievable using $\sim 10^5$ physical qubits, with runtimes on the order of days to weeks. These findings demonstrate that while full-fledged fault-tolerant quantum computers will be required for even larger molecular simulations, chemically meaningful quantum chemistry problems are already within reach in an experimentally relevant, early-FTQC regime.

quant-pharXiv:2603.22778•PRX Quantum•Mar 25, 2026•0 citations

A Review of the Role of Quantum Computing in Simulating Molecular Interaction

Ayaann Kaalra, Abhinav Srivastava, Shashank Awasthi +1 more

However, accurately simulating molecular interactions constitutes the central, but open question of computer chemistry. This is a core task for efforts in drug development, catalyst design, and materials science. Most classical algorithms perform well on smaller systems, but incumbent exponential scaling penalties are unavoidable as models grow larger and more complex to describe quantum behaviour. An entirely new paradigm for this problem is now introduced by quantum computing: superposition and entanglement resources natively encode quantum states and model their electronic structures. The paper will thus take a high-level view of the leading quantum algorithms, with particular regard to those called Variational Quantum Eigensolver (VQE) and Quantum Phase Estimation (QPE), while evaluating their performance on today's Noisy Intermediate Scale Quantum (NISQ) devices. Next will follow discussions on algorithm design and current hardware capabilities, before which open challenges on scalability, error mitigation, and algorithm design will be outlined. Emphasis shall also be placed on the ethics and accessibility issues as well as the timelines with which quantum computing might gain a practical advantage. Linking together the recent advances and limitations, this paper posits how quantum computer implementation may change the face of chemical modelling and scientific discovery.

IEEE Uttar Pradesh Section Women in Engineering International Conference on Electrical, Electronics and Computer Engineering (UPWIECON)•Oct 30, 2025•0 citations

Workflow for practical quantum chemical calculations with a quantum phase estimation algorithm: electronic ground and π–π* excited states of benzene and its derivatives

Y. Ino, Misaki Yonekawa, Hideto Yuzawa +2 more

Quantum computers are expected to perform full-configuration interaction calculations with less computational resources compared to classical ones, thanks to the use of quantum phase estimation (QPE) algorithms. However, only a limited number of QPE-based quantum chemical calculations have been reported even for numerical simulations on a classical computer, and the practical workflow for the QPE computation has not yet been established. In this paper, we report the QPE simulations of the electronic ground and the π-π* excited singlet state of benzene and its chloro- and nitro-derivatives as the representative industrially important systems, with the aid of GPGPU acceleration of quantum circuit simulations. We adopted the pseudo-natural orbitals obtained from the MP2 calculation as the basis for the wave function expansion, the CISD calculation within the active space to find the main electronic configurations to be included in the input wave function of the excited state, and the technique to reduce the truncation error of the calculated total energies. The proposed computational workflow is easily applicable to other molecules and can be a standard approach for performing QPE-based quantum chemical calculations of practical molecules.

arXiv:2312.16375•Physical Chemistry Chemical Physics•Jan 1, 2024•10 citations
While quantum algorithms for simulations exhibit better asymptotic scaling than their classical counterparts, they currently cannot be accurately implemented on real-world devices. Instead, chemists and computer scientists rely on costly classical simulations of these quantum algorithms. In particular, the quantum phase estimation (QPE) algorithm is among several approaches that has attracted much attention in recent years due to its genuine quantum character. However, it is memory-intensive to simulate and intractable for moderate system sizes. This paper discusses the performance and applicability of QPESIM, a new simulation of the QPE algorithm designed to take advantage of modest computational resources. In particular, we demonstrate the versatility of QPESIM in simulating various electronic states by examining the ground and core-level states of H 2 O. For these states, we also discuss the effect of the active-space size on the quality of the calculated energies. For the high-energy core-level states, we demonstrate that new QPE simulations for active spaces defined by 15 active orbitals significantly reduce the errors in core-level excitation energies compared to earlier QPE simulations using smaller active spaces.
This paper explores the utility of the quantum phase estimation (QPE) algorithm in calculating high-energy excited states characterized by the promotion of electrons occupying core-level shells. These states have been intensively studied over the last few decades, especially in supporting the experimental effort at light sources. Results obtained with QPE are compared with various high-accuracy many-body techniques developed to describe core-level states. The feasibility of the quantum phase estimator in identifying classes of challenging shake-up states characterized by the presence of higher-order excitation effects is discussed. We also demonstrate the utility of the QPE algorithm in targeting excitations from specific centers in a molecule. Lastly, we discuss how the lowest-order Trotter formula can be applied to reducing the complexity of the ansatz without affecting the error.
Accurate computation of non-covalent, intermolecular interaction energies is important to understand various chemical phenomena, and quantum computers are anticipated to accelerate it. Although the state-of-the-art quantum computers are still noisy and intermediate-scale ones, development of theoretical frameworks those are expected to work on a fault-tolerant quantum computer is an urgent issue. In this work, we explore resource-efficient implementation of the quantum phase estimation-based complete active space configuration interaction (QPE-CASCI) calculations, with the aid of the second-order Møller--Plesset perturbation theory (MP2)-based active space selection with Boys localized orbitals. We performed numerical simulations of QPE for the supramolecular approach-based intermolecular interaction energy calculations of the hydrogen-bonded water dimer, using 6 system and 6 ancilla qubits. With the aid of algorithmic error mitigation, the QPE-CASCI simulations achieved interaction energy predictions with an error of 0.02 kcal mol−1^{-1}−1 relative to the CASCI result, demonstrating the accuracy and efficiency of the proposed methodology. Preliminary results on quantum circuit compression for QPE are also presented to reduce the number of two-qubit gates and depth.
High Resolution Image Download MS PowerPoint Slide Quantum phase estimation (QPE) is a promising quantum algorithm for obtaining molecular ground-state energies with chemical accuracy. However, its computational cost, dominated by the Hamiltonian 1-norm λ and the cost of the block encoding, scales at least quadratically with the number of molecular orbitals, making it challenging to incorporate dynamic correlation by enlarging the active space. In this work, we investigate two strategies to mitigate this cost through the optimization of the basis set. First, we investigate whether adjusting the coefficients of Gaussian basis functions can minimize the 1-norm while preserving the accuracy of the ground state energy. Although this method leads to a reduction in the 1-norm up to 10%, this reduction is system-dependent and diminishes with increasing molecular size. Second, we demonstrate that employing a large-basis-set frozen natural orbital (FNO) strategy results in a substantial reduction in QPE resources without compromising accuracy. We study a data set of 58 small organic molecules and the dissociation curve of N 2, and demonstrate that an active space constructed from orbitals derived from larger basis sets captures correlation effects more effectively. This approach yields up to an 80% reduction in the 1-norm λ and also leads to a 55% reduction in the number of orbitals. Our results highlight that improving the quality, not just the size, of the orbital basis is a viable strategy for extending QPE to include dynamical correlation, making progress toward scalable and chemically accurate quantum simulations with tractable resource requirements.
Quantum simulation of molecular electronic structure is one of the most promising applications of quantum computing. However, achieving chemically accurate predictions for strongly correlated systems requires quantum phase estimation (QPE) on fault-tolerant quantum computing (FTQC) devices. Existing resource estimates for typical FTQC architectures suggest that such calculations demand millions of physical qubits, thereby placing them beyond the reach of near-term devices. Here, we investigate the feasibility of performing QPE for chemically relevant molecular systems in an early-FTQC regime, characterized by partial fault tolerance, constrained qubit budgets, and limited circuit depth. Our framework is based on single-ancilla, Trotter-based QPE implementations combined with partially randomized time evolution. Within this framework, we develop a novel Hamiltonian optimization strategy, termed unitary weight concentration, that reduces algorithmic cost by reshaping linear-combination-of-unitaries representations. Applying this framework to active-space models of iron-sulfur clusters, cytochrome P450 active sites, and CO2_22​-utilization catalysts, we perform end-to-end resource estimation using the latest version of the space-time efficient analog rotation (STAR) architecture. Our results indicate that ground-state energy estimation for active spaces of approximately 20 to 50 spatial orbitals, well beyond the reach of classical full configuration interaction, is achievable using ∼105\sim 10^5∼105 physical qubits, with runtimes on the order of days to weeks. These findings demonstrate that while full-fledged fault-tolerant quantum computers will be required for even larger molecular simulations, chemically meaningful quantum chemistry problems are already within reach in an experimentally relevant, early-FTQC regime.
However, accurately simulating molecular interactions constitutes the central, but open question of computer chemistry. This is a core task for efforts in drug development, catalyst design, and materials science. Most classical algorithms perform well on smaller systems, but incumbent exponential scaling penalties are unavoidable as models grow larger and more complex to describe quantum behaviour. An entirely new paradigm for this problem is now introduced by quantum computing: superposition and entanglement resources natively encode quantum states and model their electronic structures. The paper will thus take a high-level view of the leading quantum algorithms, with particular regard to those called Variational Quantum Eigensolver (VQE) and Quantum Phase Estimation (QPE), while evaluating their performance on today's Noisy Intermediate Scale Quantum (NISQ) devices. Next will follow discussions on algorithm design and current hardware capabilities, before which open challenges on scalability, error mitigation, and algorithm design will be outlined. Emphasis shall also be placed on the ethics and accessibility issues as well as the timelines with which quantum computing might gain a practical advantage. Linking together the recent advances and limitations, this paper posits how quantum computer implementation may change the face of chemical modelling and scientific discovery.
Quantum computers are expected to perform full-configuration interaction calculations with less computational resources compared to classical ones, thanks to the use of quantum phase estimation (QPE) algorithms. However, only a limited number of QPE-based quantum chemical calculations have been reported even for numerical simulations on a classical computer, and the practical workflow for the QPE computation has not yet been established. In this paper, we report the QPE simulations of the electronic ground and the π-π* excited singlet state of benzene and its chloro- and nitro-derivatives as the representative industrially important systems, with the aid of GPGPU acceleration of quantum circuit simulations. We adopted the pseudo-natural orbitals obtained from the MP2 calculation as the basis for the wave function expansion, the CISD calculation within the active space to find the main electronic configurations to be included in the input wave function of the excited state, and the technique to reduce the truncation error of the calculated total energies. The proposed computational workflow is easily applicable to other molecules and can be a standard approach for performing QPE-based quantum chemical calculations of practical molecules.