Quantum computing is a rapidly expanding field with applications ranging from optimization all the way to complex machine learning tasks. Quantum memories, while lacking in practical quantum computers, have the potential to bring quantum advantage. In quantum machine learning applications for example, a quantum memory can simplify the data loading process and potentially accelerate the learning task. Quantum memory can also store intermediate quantum state of qubits that can be reused for computation. However, the depth, gate count and compilation time of quantum memories such as, Quantum Read Only Memory (QROM) scale exponentially with the number of address lines making them impractical in state-of-the-art Noisy Intermediate-Scale Quantum (NISQ) computers beyond 4-bit addresses. In this paper, we propose techniques such as, pre-decoding logic and qubit reset to reduce the depth and gate count of QROM circuits to target wider address ranges such as, 8-bits. The proposed approach reduces the number of gates and depth count by at least 2X compared to the naive implementation at only 36% qubit overhead. A reduction in circuit depth and gate count as high as 75X and compilation time by 85X at the cost of a maximum of 2.28X qubit overhead is observed. Experimentally, the fidelity with the proposed pre-decoding circuit compared to existing optimization approach is also higher (as much as 73% compared to 40.8%) under reduced error rates.
Quantum computing is a rapidly expanding field with applications ranging from optimization all the way to complex machine learning tasks. Quantum memories, while lacking in practical quantum computers, have the potential to bring quantum advantage. In quantum machine learning applications for example, a quantum memory can simplify the data loading process and potentially accelerate the learning task. Quantum memory can also store intermediate quantum state of qubits that can be reused for computation. However, the depth, gate count and compilation time of quantum memories such as, Quantum Read Only Memory (QROM) scale exponentially with the number of address lines making them impractical in state-of-the-art Noisy Intermediate-Scale Quantum (NISQ) computers beyond 4-bit addresses. In this paper, we propose techniques such as, pre-decoding logic and qubit reset to reduce the depth and gate count of QROM circuits to target wider address ranges such as, 8-bits. The proposed approach reduces the number of gates and depth count by at least 2X compared to the naive implementation at only 36% qubit overhead. A reduction in circuit depth and gate count as high as 75X and compilation time by 85X at the cost of a maximum of 2.28X qubit overhead is observed. Experimentally, the fidelity with the proposed pre-decoding circuit compared to existing optimization approach is also higher (as much as 73% compared to 40.8%) under reduced error rates.
Emerging quantum algorithms that process data require that classical input data be represented as a quantum state. These data-processing algorithms often follow the gate model of quantum computing-which requires qubits to be initialized to a basis state, typically| 0 〉-and thus often employ state generation circuits to transform the initialized basis state to a data-representation state. There are many ways to encode classical data in a qubit, and the oft-applied approach of basis encoding does not allow optimization to the extent that other variants do. In this work, we thus consider automatic synthesis of addressable, quantum read-only memory (QROM) circuits, which act as data-encoding state-generation circuits. We investi-gate three data encoding approaches, one of which we introduce to provide improved dynamic range and precision. We present experimental results that compare these encoding methods for QROM synthesis to better understand the implications of and applications for each.
Quantum computing faces challenges such as noise, short coherence time, and limited qubit connections. These challenges worsen as quantum circuits become more complex. One major issue is the increasing depth of quantum circuits. This research proposes an optimization framework targeting depth and gate count reduction in quantum circuits, specifically for Noisy Intermediate-Scale Quantum (NISQ) devices. The proposed approach combines unitary merging of single-qubit gates, CNOT cancellation, gate commuting, and rotation gate rewriting strategies. Consecutive gates acting on the same qubit, such asRx(θ1)⋅Rx(θ2), are algebraically merged into a single rotation, while pairs of redundant CNOT gates are eliminated based on gate identity relations. The technique is implemented using Qiskit and validated across five diverse circuits including complex, random, and multi-qubit configurations. Experimental results show an average depth reduction of 33.33% and gate count reduction of 32.14%, with runtime improvement of up to 25%. For instance, an input circuit with a depth of 7 and gate count of 11 was reduced to a depth of 2 and 4 gates. All optimized circuits preserve functional correctness with a fidelityF≥0.99. High-resolution circuit diagrams are presented to visually demonstrate improvements before and after optimization. Additionally, global phase shifts such aseiπ/4are preserved or analytically characterized where relevant. This work enhances the viability of quantum computations on near-term hardware and opens pathways for future AI-driven quantum optimizations.
Quantum computing, leveraging the principles of superposition and entanglement, holds the potential to revolutionize computational problem-solving across a wide array of fields, from cryptography to complex system simulations. However, unlocking the full power of quantum computing requires the development of advanced quantum compilation techniques that can efficiently map high-level algorithms onto physical quantum hardware. This paper delves into state-of-the-art optimization strategies within quantum compilers, with a particular focus on methods such as Relaxed Peephole Optimization (RPO), gate reordering techniques for the Quantum Approximate Optimization Algorithm (QAOA), and reinforcement learning (RL)-driven frameworks. It also explores innovative approaches like distributed quantum compilation, parity quantum optimization, and the Paulihedral framework, all designed to minimize gate counts, reduce circuit depth, and optimize overall resource utilization. A key contribution of this work is the introduction of error mitigation techniques that enhance the fidelity and scalability of quantum circuits, particularly on noisy intermediate-scale quantum (NISQ) devices. Through comprehensive empirical evaluations across a variety of quantum algorithms, the paper demonstrates significant improvements in critical performance metrics such as circuit depth, gate count, and execution efficiency, providing a promising direction for optimizing quantum circuit design tailored to diverse quantum hardware platforms.
The current phase of quantum computing is in the Noisy Intermediate-Scale Quantum (NISQ) era. On NISQ devices, two-qubit gates such as CNOTs are much noisier than single-qubit gates, so it is essential to minimize their count. Quantum circuit synthesis is a process of decomposing an arbitrary unitary into a sequence of quantum gates, and can be used as an optimization tool to produce shorter circuits to improve overall circuit fidelity. However, the time-to-solution of synthesis grows exponentially with the number of qubits. As a result, synthesis is intractable for circuits on a large qubit scale.
In this paper, we propose a hierarchical, block-by-block optimization framework, QGo, for quantum circuit optimization. Our approach allows an exponential cost optimization to scale to large circuits. QGo uses a combination of partitioning and synthesis: 1) partition the circuit into a sequence of independent circuit blocks; 2) re-generate and optimize each block using quantum synthesis; and 3) re-compose the final circuit by stitching all the blocks together. We perform our analysis and show the fidelity improvements in three different regimes: small-size circuits on real devices, medium-size circuits on noise simulations, and large-size circuits on analytical models. Using a set of NISQ benchmarks, we show that QGo can reduce the number of CNOT gates by 29.9% on average and up to 50% when compared with industrial compilers such as t|ket>. When executed on the IBM Athens system, shorter depth leads to higher circuit fidelity. We also demonstrate the scalability of our QGo technique to optimize circuits of 60+ qubits. Our technique is the first demonstration of successfully employing and scaling synthesis in the compilation toolchain for large circuits. Overall, our approach is robust for direct incorporation in production compiler toolchains.
Hybridizing machine learning (ML) with quantum computing has become an attractive strategy to increase computational power on Noisy Intermediate Scale Quantum (NISQ) devices. Although these can be potentially quantum advantage devices, their qubit numbers and noise are bounded and there are challenges when it comes to practical quantum circuit realization. This work concentrates on the creation of optimized quantum circuits via ML-based strategies, to enhance the performance of the circuits, to reduce the error rate and to accommodate the particular noise profile of the hardware of NISQ devices. The resulting suboptimal mappings with little or no consideration of noise and hardware topology in traditional quantum compilers can ruin the fidelity of quantum algorithm. Leveraging machine learning, and specifically reinforcement and supervised learning methods, our method learns to optimize compilation strategy for specific quantum hardware architecture. The paper proposes a framework that uses machine learning models to predict qubit mappings, gate decompositions, and transpilation paths that minimize gate depth and error accumulation. We also investigate transfer learning methods for propagating the learned compilation strategies to novel NISQ machines. Such methods are empirically validated on both simulated and real quantum hardware backends, providing evidence of circuit depth, execution time and error reductions. The results show that ML-assisted compilation can achieve better success probabilities for benchmark quantum algorithms like VQE and QAOA than conventional compilers. Furthermore, the work examines the interpretability of ML models providing hardware-aware optimization recommendations and understanding the noise patterns and methods of error correction. Our work highlights the key role of ML for transferring between theoretical quantum algorithms and their practical NISQ implementations. This integration boosts the immediate applicability of existing quantum devices and provides a basis for adaptive and scalable likelihood-based compilation for the era of fault-tolerant quantum computation. Our results motivate further investigation of hybrid classical-quantum workflows, in which ML iteratively improves compilation in accordance with changing hardware noise and capabilities. By improving quantum circuit compilation onNISQ computers, this work is taking steps toward the realization of quantum advantage in application scenarios such as optimization, cryptography, and quantum simulation without needing to wait for fully fault-tolerant large-scale quantum computers.
The design of quantum algorithms typically assumes the availability of an ideal quantum computer, characterized by full connectivity, noiseless operation, and unlimited coherence time. However, Noisy Intermediate-Scale Quantum (NISQ) devices present a stark contrast, with a limited number of qubits, non-negligible quantum operation errors, and stringent constraints on the connectivity of physical qubits within a Quantum Processing Unit (QPU). This necessitates the dynamic remapping of logical qubits to physical qubits within the compiler to facilitate the execution of two-qubit gates in the algorithm. However, this introduces additional operations, consequently reducing the fidelity of the algorithm. Therefore, minimizing the number of added gates becomes crucial. Finding such an optimal routing problem is NP-hard, and the task is conventionally addressed using human-crafted heuristics to search for SWAP sequences, but these lack performance guarantees. In this study, we employ a Seq2Seq machine learning model for the qubit routing task, incorporating a Transformer neural network to learn the routing information in the gate and SWAP sequence. Compared to heuristic search-based algorithms, our approach significantly reduces the overhead of quantum computing resources required to adapt logical circuits to physical circuits executable on specific quantum backend hardware.