Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2203.14995 · Physica Scripta

Measurement-based interleaved randomised benchmarking using IBM processors

Conrad Strydom, Mark Tame

Published Jan 12, 2023• 3 citations
arXivHTMLPDF

Abstract

Abstract Quantum computers have the potential to outperform classical computers in a range of computational tasks, such as prime factorisation and unstructured searching. However, real-world quantum computers are subject to noise. Quantifying noise is of vital importance, since it is often the dominant factor preventing the successful realisation of advanced quantum computations. Here we propose and demonstrate an interleaved randomised benchmarking protocol for measurement-based quantum computers that can be used to estimate the fidelity of any single-qubit measurement-based gate. We tested the protocol on IBM superconducting quantum processors by estimating the fidelity of the Hadamard and T gates—a universal single-qubit gate set. Measurements were performed on entangled cluster states of up to 31 qubits. Our estimated gate fidelities show good agreement with those calculated from quantum process tomography. By artificially increasing noise, we were able to show that our protocol detects large noise variations in different implementations of a gate.

DOI
10.1088/1402-4896/acb298

Related papers

Efficient Measurement of Quantum Gate Error by Interleaved Randomized Benchmarking

Easwar Magesan, Jay Gambetta, Blake Johnson +9 more

We describe a scalable experimental protocol for estimating the average error of individual quantum computational gates. This protocol consists of interleaving random Clifford gates between the gate of interest and provides an estimate as well as theoretical bounds for the average error of the gate under test, so long as the average noise variation over all Clifford gates is small. This technique takes into account both state preparation and measurement errors and is scalable in the number of qubits. We apply this protocol to a superconducting qubit system and find a bounded average error of 0.003 [0,0.016] for the single-qubit gates X(π/2) and Y(π/2). These bounded values provide better estimates of the average error than those extracted via quantum process tomography.

arXiv:1203.4550•Physical Review Letters•Aug 24, 2012•428 citations

On the robustness of the hybrid qubit computational gates through simulated randomized benchmarking protocols

Elena Ferraro, Marco De Michielis

One of the main challenges in building a quantum processor is to characterize the environmental noise. Noise characterization can be achieved by exploiting different techniques, such as randomization where several sequences of random quantum gates are applied to the qubit under test to derive statistical characteristics about the affecting noises. A scalable and robust algorithm able to benchmark the full set of Clifford gates using randomization techniques is called randomized benchmarking. In this study, we simulated randomized benchmarking protocols in a semiconducting all-electrical three-electron double-quantum dot qubit, i.e. hybrid qubit, under different error models, that include quasi-static Gaussian and the more realistic 1/f noise model, for the input controls. The average error of specific quantum computational gates is extracted through interleaved randomized benchmarking obtained including Clifford gates between the gate of interest. It provides an estimate of the fidelity as well as theoretical bounds for the average error of the gate under test.

arXiv:2011.01585•Scientific Reports•Oct 20, 2020•6 citations

Interleaved Benchmarking with Single-Qubit References

Ilya A. Simakov, Arina V. Zotova, Tatyana A. Chudakova +10 more

Cross-entropy benchmarking (XEB) with single-qubit reference sequences is widely used to characterize multi-qubit gates in large-scale quantum processors, despite the lack of a rigorous theoretical justification. Here we show that the commonly employed additive single-qubit errors approximation underlying this approach breaks down and leads to a systematic overestimation of gate fidelities. We derive an analytical expression for the joint decay of simultaneous single-qubit reference sequences, identify when interleaved circuits generate sufficient randomization for the standard depolarizing approximation, and obtain a refined expression for the interleaved gate fidelity estimation. Experiments on a superconducting quantum processor validate the theory and demonstrate that fidelities obtained using XEB with single-qubit references agree with those extracted from standard interleaved randomized benchmarking (IRB), while achieving higher precision due to reduced reference-sequence errors. Our results establish theoretical foundation for interleaved benchmarking protocols employing single-qubit reference sequences and show that, with appropriate post-processing, they provide a simple and accurate alternative to multi-qubit Clifford reference circuits.

quant-pharXiv:2603.05422•Mar 6, 2026•0 citations

Scalable randomised benchmarking of non-Clifford gates

Andrew W. Cross, Easwar Magesan, Lev S. Bishop +2 more

Randomised benchmarking is a widely used experimental technique to characterise the average error of quantum operations. Benchmarking procedures that scale to enable the characterisation of n-qubit circuits rely on efficient procedures for manipulating those circuits and, as such, have been limited to subgroups of the Clifford group. However, universal quantum computers require additional, non-Clifford gates to approximate arbitrary unitary transformations. We define a scalable randomised benchmarking procedure over n-qubit unitary matrices that correspond to protected non-Clifford gates for a class of stabiliser codes. We present efficient methods for representing and composing group elements, sampling them uniformly and synthesising corresponding poly(n)-sized circuits. The procedure provides experimental access to two independent parameters that together characterise the average gate fidelity of a group element. A scalable procedure to determine the error of quantum operations has been developed by researchers in the United States. Andrew Cross and colleagues at the IBM T.J. Watson Research Center have expanded previously used protocols to a broader range of quantum circuits, thereby enabling error benchmarking for all common logical operations used in leading quantum computing protocols. The standard technique for error characterization in these devices is randomized benchmarking, which provides benefits such as insensitivity to measurement errors, but on the other hand only functions in a limited number of circumstances. In their theoretical study, the researchers demonstrate how randomized benchmarking approaches can be expanded to a much broader range of logical operations. The procedure can be readily implemented experimentally, and provides access to important experimental noise parameters in quantum computing.

npj Quantum Information•Apr 26, 2016•91 citations

Estimating the fidelity of T gates using standard interleaved randomized benchmarking

Robin Harper, Steven T. Flammia

Abstract Randomized benchmarking is an important protocol for robustly characterizing the error rates of quantum gates. The technique is typically applied to the Clifford gates since they form a group that satisfies a convenient technical condition of forming a unitary 2-design, in addition to having a tight connection to fault-tolerant quantum computing and an efficient classical simulation. In order to achieve universal quantum computing one must add at least one additional gate such as the T gate (also known as the π /8 gate). Here we propose and analyze a simple variation of the standard interleaved RB protocol that can accurately estimate the average fidelity of the T gate while retaining the many advantages of a unitary 2-design and the fidelity guarantees that such a design delivers, as well as the efficient classical simulation property of the Clifford group. Our work complements prior methods that have succeeded in estimating T gate fidelities, but only by relaxing the 2-design constraint and using a more complicated data analysis.

arXiv:1608.02943•Quantum Science and Technology•Feb 9, 2017•40 citations

Compressed Gate Characterization for Quantum Devices with Time-Correlated Noise

Michael J. Gullans, M. Caranti, Adam Mills +1 more

As quantum devices make steady progress towards intermediate scale and fault-tolerant quantum computing, it is essential to develop rigorous and efficient measurement protocols that account for known sources of noise. Most existing quantum characterization protocols such as gate-set tomography and randomized benchmarking assume the noise acting on the qubits is Markovian. However, this assumption is often not valid, as for the case of 1/f charge noise or hyperfine nuclear spin noise. Here, we present a general framework for quantum process tomography (QPT) in the presence of time-correlated noise. We further introduce fidelity benchmarks that quantify the relative strength of different sources of Markovian and non-Markovian noise. As an application of our method, we perform a comparative theoretical and experimental analysis of silicon spin qubits. We first develop a detailed noise model that accounts for the dominant sources of noise and validate the model against experimental data. Applying our framework for time-correlated QPT, we find that the number of independent parameters needed to characterize one- and two-qubit gates can be compressed by 10× and 100× , respectively, when compared to the fully generic case. These compressions reduce the amount of tomographic measurements needed in experiment, while also significantly speeding up numerical simulations of noisy quantum circuit dynamics compared to time-dependent Hamiltonian simulation. Using this compressed noise model, we find good agreement between our theoretically predicted process fidelities and two-qubit interleaved randomized benchmarking fidelities of 99.8% measured in recent experiments on silicon spin qubits. More broadly, our formalism can be directly extended to develop efficient and scalable tuning protocols for high-fidelity control of large arrays of quantum devices with non-Markovian noise. Published by the American Physical Society 2024

arXiv:2307.14432•PRX Quantum•Jan 18, 2024•8 citations
Abstract Quantum computers have the potential to outperform classical computers in a range of computational tasks, such as prime factorisation and unstructured searching. However, real-world quantum computers are subject to noise. Quantifying noise is of vital importance, since it is often the dominant factor preventing the successful realisation of advanced quantum computations. Here we propose and demonstrate an interleaved randomised benchmarking protocol for measurement-based quantum computers that can be used to estimate the fidelity of any single-qubit measurement-based gate. We tested the protocol on IBM superconducting quantum processors by estimating the fidelity of the Hadamard and T gates—a universal single-qubit gate set. Measurements were performed on entangled cluster states of up to 31 qubits. Our estimated gate fidelities show good agreement with those calculated from quantum process tomography. By artificially increasing noise, we were able to show that our protocol detects large noise variations in different implementations of a gate.
We describe a scalable experimental protocol for estimating the average error of individual quantum computational gates. This protocol consists of interleaving random Clifford gates between the gate of interest and provides an estimate as well as theoretical bounds for the average error of the gate under test, so long as the average noise variation over all Clifford gates is small. This technique takes into account both state preparation and measurement errors and is scalable in the number of qubits. We apply this protocol to a superconducting qubit system and find a bounded average error of 0.003 [0,0.016] for the single-qubit gates X(π/2) and Y(π/2). These bounded values provide better estimates of the average error than those extracted via quantum process tomography.
One of the main challenges in building a quantum processor is to characterize the environmental noise. Noise characterization can be achieved by exploiting different techniques, such as randomization where several sequences of random quantum gates are applied to the qubit under test to derive statistical characteristics about the affecting noises. A scalable and robust algorithm able to benchmark the full set of Clifford gates using randomization techniques is called randomized benchmarking. In this study, we simulated randomized benchmarking protocols in a semiconducting all-electrical three-electron double-quantum dot qubit, i.e. hybrid qubit, under different error models, that include quasi-static Gaussian and the more realistic 1/f noise model, for the input controls. The average error of specific quantum computational gates is extracted through interleaved randomized benchmarking obtained including Clifford gates between the gate of interest. It provides an estimate of the fidelity as well as theoretical bounds for the average error of the gate under test.
Cross-entropy benchmarking (XEB) with single-qubit reference sequences is widely used to characterize multi-qubit gates in large-scale quantum processors, despite the lack of a rigorous theoretical justification. Here we show that the commonly employed additive single-qubit errors approximation underlying this approach breaks down and leads to a systematic overestimation of gate fidelities. We derive an analytical expression for the joint decay of simultaneous single-qubit reference sequences, identify when interleaved circuits generate sufficient randomization for the standard depolarizing approximation, and obtain a refined expression for the interleaved gate fidelity estimation. Experiments on a superconducting quantum processor validate the theory and demonstrate that fidelities obtained using XEB with single-qubit references agree with those extracted from standard interleaved randomized benchmarking (IRB), while achieving higher precision due to reduced reference-sequence errors. Our results establish theoretical foundation for interleaved benchmarking protocols employing single-qubit reference sequences and show that, with appropriate post-processing, they provide a simple and accurate alternative to multi-qubit Clifford reference circuits.
Randomised benchmarking is a widely used experimental technique to characterise the average error of quantum operations. Benchmarking procedures that scale to enable the characterisation of n-qubit circuits rely on efficient procedures for manipulating those circuits and, as such, have been limited to subgroups of the Clifford group. However, universal quantum computers require additional, non-Clifford gates to approximate arbitrary unitary transformations. We define a scalable randomised benchmarking procedure over n-qubit unitary matrices that correspond to protected non-Clifford gates for a class of stabiliser codes. We present efficient methods for representing and composing group elements, sampling them uniformly and synthesising corresponding poly(n)-sized circuits. The procedure provides experimental access to two independent parameters that together characterise the average gate fidelity of a group element. A scalable procedure to determine the error of quantum operations has been developed by researchers in the United States. Andrew Cross and colleagues at the IBM T.J. Watson Research Center have expanded previously used protocols to a broader range of quantum circuits, thereby enabling error benchmarking for all common logical operations used in leading quantum computing protocols. The standard technique for error characterization in these devices is randomized benchmarking, which provides benefits such as insensitivity to measurement errors, but on the other hand only functions in a limited number of circumstances. In their theoretical study, the researchers demonstrate how randomized benchmarking approaches can be expanded to a much broader range of logical operations. The procedure can be readily implemented experimentally, and provides access to important experimental noise parameters in quantum computing.
Abstract Randomized benchmarking is an important protocol for robustly characterizing the error rates of quantum gates. The technique is typically applied to the Clifford gates since they form a group that satisfies a convenient technical condition of forming a unitary 2-design, in addition to having a tight connection to fault-tolerant quantum computing and an efficient classical simulation. In order to achieve universal quantum computing one must add at least one additional gate such as the T gate (also known as the π /8 gate). Here we propose and analyze a simple variation of the standard interleaved RB protocol that can accurately estimate the average fidelity of the T gate while retaining the many advantages of a unitary 2-design and the fidelity guarantees that such a design delivers, as well as the efficient classical simulation property of the Clifford group. Our work complements prior methods that have succeeded in estimating T gate fidelities, but only by relaxing the 2-design constraint and using a more complicated data analysis.
As quantum devices make steady progress towards intermediate scale and fault-tolerant quantum computing, it is essential to develop rigorous and efficient measurement protocols that account for known sources of noise. Most existing quantum characterization protocols such as gate-set tomography and randomized benchmarking assume the noise acting on the qubits is Markovian. However, this assumption is often not valid, as for the case of 1/f charge noise or hyperfine nuclear spin noise. Here, we present a general framework for quantum process tomography (QPT) in the presence of time-correlated noise. We further introduce fidelity benchmarks that quantify the relative strength of different sources of Markovian and non-Markovian noise. As an application of our method, we perform a comparative theoretical and experimental analysis of silicon spin qubits. We first develop a detailed noise model that accounts for the dominant sources of noise and validate the model against experimental data. Applying our framework for time-correlated QPT, we find that the number of independent parameters needed to characterize one- and two-qubit gates can be compressed by 10× and 100× , respectively, when compared to the fully generic case. These compressions reduce the amount of tomographic measurements needed in experiment, while also significantly speeding up numerical simulations of noisy quantum circuit dynamics compared to time-dependent Hamiltonian simulation. Using this compressed noise model, we find good agreement between our theoretically predicted process fidelities and two-qubit interleaved randomized benchmarking fidelities of 99.8% measured in recent experiments on silicon spin qubits. More broadly, our formalism can be directly extended to develop efficient and scalable tuning protocols for high-fidelity control of large arrays of quantum devices with non-Markovian noise. Published by the American Physical Society 2024