Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2202.07229 · Physical Review Research

Saturable Purcell filter for circuit quantum electrodynamics

Ivan Iakoupov, Kazuki Koshino

Published Feb 27, 2023• 5 citations
arXivHTMLPDF

Abstract

We consider a typical circuit QED setup where an artificial atom encodes a qubit and is dispersively coupled to a measurement resonator that in turn is coupled to a transmission line. We show theoretically that by placing another artificial atom in this transmission line to act as a filter, the Purcell decay of the qubit into the transmission line is suppressed. When strong control fields are applied in the transmission line, the filter is saturated and effectively switched off. Such a Purcell filtering capability permits both the control and measurement of the qubit using the single transmission line, while maintaining the long coherence time of the qubit in the absence of the control pulses. We show that high fidelity Pauli ${\ensuremath{\sigma}}_{x}$ gates on the qubit can be realized using simple pulse shapes. For devices that already use one transmission line both for control and measurement of the qubit, our paper provides a way to completely filter out the qubit frequency without removing the possibility of controlling the system. Further, combining the proposed filter with frequency multiplexing potentially enables both control and measurement of several qubits using a single Purcell-filtered transmission line. This will enhance the scalability of superconducting quantum processors by decreasing the number of the required transmission lines.

DOI
10.1103/physrevresearch.5.013148

Related papers

Broadband bandpass Purcell filter for circuit quantum electrodynamics

Haoxiong Yan, Xuntao Wu, Andrew Lingenfelter +10 more

In circuit quantum electrodynamics, qubits are typically measured using dispersively coupled readout resonators. Coupling between each readout resonator and its electrical environment, however, reduces the qubit lifetime via the Purcell effect. Inserting a Purcell filter counters this effect while maintaining high readout fidelity but reduces measurement bandwidth and, thus, limits multiplexing readout capacity. In this Letter, we develop and implement a multi-stage bandpass Purcell filter that yields better qubit protection while simultaneously increasing measurement bandwidth and multiplexed capacity. We report on the experimental performance of our transmission-line-based implementation of this approach, a flexible design that can easily be integrated with current scaled-up, long coherence time superconducting quantum processors.

arXiv:2306.06258•Applied Physics Letters•Sep 25, 2023•15 citations

Fast Multiplexed Superconducting-Qubit Readout with Intrinsic Purcell Filtering Using a Multiconductor Transmission Line

Peter Spring, Luka Milanovic, Yoshiki Sunada +4 more

Fast and accurate qubit measurement remains a critical challenge on the path to fault-tolerant quantum computing. In superconducting quantum circuits, fast qubit measurement has been achieved using a dispersively coupled resonator with a large externally limited linewidth. This necessitates the use of a Purcell filter that protects the qubit from relaxation through the readout channel. Here, we show that a readout resonator and filter resonator, coupled to each other both capacitively and inductively via a multiconductor transmission line, can produce a compact notch-filter circuit that effectively eliminates the Purcell decay channel through destructive interference. By utilizing linewidths as large as 42 MHz, we perform simultaneous readout of four qubits using a 56-ns integration window and benchmark an average assignment fidelity of 99.77%, with the highest qubit assignment fidelity exceeding 99.9%. Including the simulated readout ring-down time, the total readout duration was between 115 and 215 ns for the four qubits, which we anticipate can be reduced to around 100 ns with active ring-down pulse shaping. These results demonstrate a significant advancement in speed and fidelity for multiplexed superconducting-qubit readout.

arXiv:2409.04967•PRX Quantum•Jun 5, 2025•36 citations

Quantum theory of a bandpass Purcell filter for qubit readout

Eyob Alebachew Sete, John M. Martinis, Alexander N. Korotkov

The measurement fidelity of superconducting transmon and Xmon qubits is partially limited by the qubit energy relaxation through the resonator into the transmission line, which is also known as the Purcell effect. One way to suppress this energy relaxation is to employ a filter which impedes microwave propagation at the qubit frequency. We present semiclassical and quantum analyses for the bandpass Purcell filter realized by E. Jeffrey et al. [Phys. Rev. Lett. 112, 190504 (2014)]. For typical experimental parameters, the bandpass filter suppresses the qubit relaxation rate by up to two orders of magnitude while maintaining the same measurement rate. We also show that in the presence of a microwave drive the qubit relaxation rate further decreases with increasing drive strength.

arXiv:1504.06030•Physical Review A•Jul 21, 2015•115 citations

Subharmonic Control of a Fluxonium Qubit via a Purcell-Protected Flux Line

J. Schirk, Florian Wallner, L. Huang +21 more

Protecting qubits from environmental noise while maintaining strong coupling for fast high-fidelity control is a central challenge for quantum information processing. Here, we demonstrate a control scheme for superconducting fluxonium qubits that eliminates qubit decay through the control channel by suppressing the environmental density of states at the transition frequency. Adding a low-pass filter on the flux line allows for flux-biasing and, at the same time, coherently controlling the fluxonium qubit by parametrically driving it at integer fractions of its transition frequency. We compare the filtered to the unfiltered configuration and find a 5-times-longer T 1 , and a 10-times-improved T 2 -echo time in the filtered case. We demonstrate coherent control with up to 11-photon subharmonic drives, highlighting the strong nonlinearity of the fluxonium potential. Measured Rabi frequencies and drive-induced frequency shifts show excellent agreement with numerical and analytical models. Furthermore, we show the equivalence of a 3-photon subharmonic drive to an on-resonance drive by benchmarking subharmonic gate fidelities above 99.94%. These results open up a scalable path for full qubit control through a single Purcell-protected channel, providing strong suppression of control-induced decoherence and enabling wiring-efficient superconducting quantum processors.

arXiv:2410.00495•PRX Quantum•Jun 24, 2025•9 citations

First-principles study of dispersive readout in circuit QED

Angela Riva, Prakritish Gogoi, Nicolas Gheeraert +4 more

The speed and fidelity of dispersive readout of superconducting qubits should improve by increasing the amplitude of the measurement drive. Experiments show, however, that beyond some drive amplitude there is always a saturation or drop in fidelity, often associated with a decrease in qubit energy relaxation time $T_1$. A simple Lindblad master equation does not capture the latter effect. More involved approaches based on effective master equations rely on strong assumptions about the spectra of the system and the bath and only partially agree with observations. Here, we perform a first-principles simulation of the full unitary dynamics of dispersive readout by considering the circuit QED Hamiltonian coupled to a microscopic model for the measurement transmission line, allowing for its arbitrary spectrum, including filters. Our access to the dynamics of the bath degrees of freedom allows us to investigate the emission spectrum of the system as a function of drive power. We show how the dependence of qubit $T_1$ on readout drive amplitude is sensitive to the details of the bath spectrum. In particular, we find that $T_1$ drops with increasing drive amplitude when a Purcell notch filter is placed at the qubit frequency, and that the Lindblad master equation shows general qualitative defects compared to the first-principles model.

quant-pharXiv:2604.11722•Apr 14, 2026•0 citations

Sub-resonant wideband superconducting Purcell filters

Basil M. Smitham, Jeronimo G. C. Martinez, Christie Chiu +1 more

In superconducting quantum devices, Purcell filters protect qubit information from decaying into external lines by reducing external coupling at qubit frequencies while maintaining it at readout frequencies. Here, we introduce and demonstrate a novel Purcell filter design that places the readout resonator frequencies in a "linewidth plateau" below the filter's first resonant mode. This approach, based on direct admittance engineering, can simultaneously achieve strong qubit protection and nearly constant external coupling across a wide readout bandwidth, addressing the traditional tradeoff between these properties. We first present a lumped-element analysis of our filters. We then experimentally demonstrate a compact on-chip linewidth-plateau filter, coupled to four resonators across its approximately 1 GHz readout band. We compare the measured linewidths to numerical predictions, and show how the filter protects a frequency-tunable transmon qubit from external decay. We envision that our flexible design paradigm will aid in efforts to create multiplexed readout architectures for superconducting quantum circuits, with well-controlled external couplings.

arXiv:2503.10750•Mar 13, 2025•0 citations
We consider a typical circuit QED setup where an artificial atom encodes a qubit and is dispersively coupled to a measurement resonator that in turn is coupled to a transmission line. We show theoretically that by placing another artificial atom in this transmission line to act as a filter, the Purcell decay of the qubit into the transmission line is suppressed. When strong control fields are applied in the transmission line, the filter is saturated and effectively switched off. Such a Purcell filtering capability permits both the control and measurement of the qubit using the single transmission line, while maintaining the long coherence time of the qubit in the absence of the control pulses. We show that high fidelity Pauli \ensuremathσx{\ensuremath{\sigma}}_{x}\ensuremathσx​ gates on the qubit can be realized using simple pulse shapes. For devices that already use one transmission line both for control and measurement of the qubit, our paper provides a way to completely filter out the qubit frequency without removing the possibility of controlling the system. Further, combining the proposed filter with frequency multiplexing potentially enables both control and measurement of several qubits using a single Purcell-filtered transmission line. This will enhance the scalability of superconducting quantum processors by decreasing the number of the required transmission lines.
In circuit quantum electrodynamics, qubits are typically measured using dispersively coupled readout resonators. Coupling between each readout resonator and its electrical environment, however, reduces the qubit lifetime via the Purcell effect. Inserting a Purcell filter counters this effect while maintaining high readout fidelity but reduces measurement bandwidth and, thus, limits multiplexing readout capacity. In this Letter, we develop and implement a multi-stage bandpass Purcell filter that yields better qubit protection while simultaneously increasing measurement bandwidth and multiplexed capacity. We report on the experimental performance of our transmission-line-based implementation of this approach, a flexible design that can easily be integrated with current scaled-up, long coherence time superconducting quantum processors.
Fast and accurate qubit measurement remains a critical challenge on the path to fault-tolerant quantum computing. In superconducting quantum circuits, fast qubit measurement has been achieved using a dispersively coupled resonator with a large externally limited linewidth. This necessitates the use of a Purcell filter that protects the qubit from relaxation through the readout channel. Here, we show that a readout resonator and filter resonator, coupled to each other both capacitively and inductively via a multiconductor transmission line, can produce a compact notch-filter circuit that effectively eliminates the Purcell decay channel through destructive interference. By utilizing linewidths as large as 42 MHz, we perform simultaneous readout of four qubits using a 56-ns integration window and benchmark an average assignment fidelity of 99.77%, with the highest qubit assignment fidelity exceeding 99.9%. Including the simulated readout ring-down time, the total readout duration was between 115 and 215 ns for the four qubits, which we anticipate can be reduced to around 100 ns with active ring-down pulse shaping. These results demonstrate a significant advancement in speed and fidelity for multiplexed superconducting-qubit readout.
The measurement fidelity of superconducting transmon and Xmon qubits is partially limited by the qubit energy relaxation through the resonator into the transmission line, which is also known as the Purcell effect. One way to suppress this energy relaxation is to employ a filter which impedes microwave propagation at the qubit frequency. We present semiclassical and quantum analyses for the bandpass Purcell filter realized by E. Jeffrey et al. [Phys. Rev. Lett. 112, 190504 (2014)]. For typical experimental parameters, the bandpass filter suppresses the qubit relaxation rate by up to two orders of magnitude while maintaining the same measurement rate. We also show that in the presence of a microwave drive the qubit relaxation rate further decreases with increasing drive strength.
Protecting qubits from environmental noise while maintaining strong coupling for fast high-fidelity control is a central challenge for quantum information processing. Here, we demonstrate a control scheme for superconducting fluxonium qubits that eliminates qubit decay through the control channel by suppressing the environmental density of states at the transition frequency. Adding a low-pass filter on the flux line allows for flux-biasing and, at the same time, coherently controlling the fluxonium qubit by parametrically driving it at integer fractions of its transition frequency. We compare the filtered to the unfiltered configuration and find a 5-times-longer T 1 , and a 10-times-improved T 2 -echo time in the filtered case. We demonstrate coherent control with up to 11-photon subharmonic drives, highlighting the strong nonlinearity of the fluxonium potential. Measured Rabi frequencies and drive-induced frequency shifts show excellent agreement with numerical and analytical models. Furthermore, we show the equivalence of a 3-photon subharmonic drive to an on-resonance drive by benchmarking subharmonic gate fidelities above 99.94%. These results open up a scalable path for full qubit control through a single Purcell-protected channel, providing strong suppression of control-induced decoherence and enabling wiring-efficient superconducting quantum processors.
The speed and fidelity of dispersive readout of superconducting qubits should improve by increasing the amplitude of the measurement drive. Experiments show, however, that beyond some drive amplitude there is always a saturation or drop in fidelity, often associated with a decrease in qubit energy relaxation time T1T_1T1​. A simple Lindblad master equation does not capture the latter effect. More involved approaches based on effective master equations rely on strong assumptions about the spectra of the system and the bath and only partially agree with observations. Here, we perform a first-principles simulation of the full unitary dynamics of dispersive readout by considering the circuit QED Hamiltonian coupled to a microscopic model for the measurement transmission line, allowing for its arbitrary spectrum, including filters. Our access to the dynamics of the bath degrees of freedom allows us to investigate the emission spectrum of the system as a function of drive power. We show how the dependence of qubit T1T_1T1​ on readout drive amplitude is sensitive to the details of the bath spectrum. In particular, we find that T1T_1T1​ drops with increasing drive amplitude when a Purcell notch filter is placed at the qubit frequency, and that the Lindblad master equation shows general qualitative defects compared to the first-principles model.
In superconducting quantum devices, Purcell filters protect qubit information from decaying into external lines by reducing external coupling at qubit frequencies while maintaining it at readout frequencies. Here, we introduce and demonstrate a novel Purcell filter design that places the readout resonator frequencies in a "linewidth plateau" below the filter's first resonant mode. This approach, based on direct admittance engineering, can simultaneously achieve strong qubit protection and nearly constant external coupling across a wide readout bandwidth, addressing the traditional tradeoff between these properties. We first present a lumped-element analysis of our filters. We then experimentally demonstrate a compact on-chip linewidth-plateau filter, coupled to four resonators across its approximately 1 GHz readout band. We compare the measured linewidths to numerical predictions, and show how the filter protects a frequency-tunable transmon qubit from external decay. We envision that our flexible design paradigm will aid in efforts to create multiplexed readout architectures for superconducting quantum circuits, with well-controlled external couplings.