Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2202.05727 · Physical Review Research

Narrow-line imaging of single strontium atoms in shallow optical tweezers

Alexander Urech, Ivo H. A. Knottnerus, R. J. C. Spreeuw, Florian Schreck

Published Jun 27, 2022• 35 citations
arXivHTMLPDF

Abstract

Single strontium atoms held in optical tweezers have so far only been imaged using the broad ${}^{1}{S}_{0}{\text{\ensuremath{-}}}^{1}{P}_{1}\phantom{\rule{0.16em}{0ex}}$transition. For Yb, use of the narrow (183-kHz wide) ${}^{1}{S}_{0}{\text{\ensuremath{-}}}^{3}{P}_{1}\phantom{\rule{0.16em}{0ex}}$transition for simultaneous imaging and cooling has been demonstrated in tweezers with a magic wavelength for the imaging transition. We demonstrate high-fidelity imaging of single Sr atoms using its even narrower (7.4-kHz wide) ${}^{1}{S}_{0}{\text{\ensuremath{-}}}^{3}{P}_{1}\phantom{\rule{0.16em}{0ex}}$transition. The atoms are trapped in nonmagic-wavelength tweezers. We detect the photons scattered during Sisyphus cooling, thus keeping the atoms near the motional ground state of the tweezer throughout imaging. The fidelity of detection is 0.9991(4) with a survival probability of 0.97(2). An atom in a tweezer can be held under imaging conditions for 79(3) seconds allowing for hundreds of images to be taken, limited mainly by background gas collisions. The use of a fully closed (cycling) transition for imaging will provide a useful tool for state specific detection. We detect atoms in an array of 36 tweezers with 813.4-nm light and trap depths of 135(20) $\ensuremath{\mu}$K. This trap depth is three times shallower than typically used for imaging on the broad ${}^{1}{S}_{0}{\text{\ensuremath{-}}}^{1}{P}_{1}\phantom{\rule{0.16em}{0ex}}$transition. Narrow-line imaging opens the possibility to even further reduce this trap depth, as long as all trap frequencies are kept larger than the imaging transition linewidth. Imaging using a narrow-linewidth transition in a nonmagic-wavelength tweezer also allows for selective imaging of a given tweezer. As a demonstration, we selectively image (hide) a single tweezer from the array. This provides a useful tool for quantum error correction protocols.

DOI
10.1103/physrevresearch.4.023245

Related papers

Microscopic Control and Detection of Ultracold Strontium in Optical-Tweezer Arrays

Matthew A. Norcia, Aaron W. Young, Adam M. Kaufman

Optical tweezers provide a versatile platform for the manipulation and detection of single atoms.Here, we use optical tweezers to demonstrate a set of tools for the microscopic control of atomic strontium, which has two valence electrons.Compared to the single-valence-electron atoms typically used with tweezers, strontium has a more complex internal state structure with a variety of transition wavelengths and linewidths.We report single-atom loading into an array of subwavelength scale optical tweezers and lightshift-free control of a narrow-linewidth optical transition.We use this transition to perform threedimensional ground-state cooling and to enable high-fidelity nondestructive imaging of single atoms on subwavelength spatial scales.These capabilities, combined with the rich internal structure of strontium, open new possibilities including tweezer-based metrology, new quantum computing architectures, and new paths to low-entropy many-body physics.

arXiv:1810.06626•Physical Review X•Dec 28, 2018•214 citations

High-Fidelity Detection of Large-Scale Atom Arrays in an Optical Lattice

Renhao Tao, Maximilian Ammenwerth, Flavien Gyger +2 more

Recent advances in quantum simulation based on neutral atoms have largely benefited from high-resolution, single-atom sensitive imaging techniques. A variety of approaches have been developed to achieve such local detection of atoms in optical lattices or optical tweezers. For alkaline-earth and alkaline-earth-like atoms, the presence of narrow optical transitions opens up the possibility of performing novel types of Sisyphus cooling, where the cooling mechanism originates from the capability to spatially resolve the differential optical level shifts in the trap potential. Up to now, it has been an open question whether high-fidelity imaging could be achieved in a "repulsive Sisyphus" configuration, where the trap depth of the ground state exceeds that of the excited state involved in cooling. Here, we demonstrate high-fidelity (99.971(1)%) and high-survival (99.80(5)%) imaging of strontium atoms using repulsive Sisyphus cooling. We use an optical lattice as a pinning potential for atoms in a large-scale tweezer array with up to 399 tweezers and show repeated, high-fidelity lattice-tweezer-lattice transfers. We furthermore demonstrate loading the lattice with approximately 10 000 atoms directly from the MOT and scalable imaging over >10 000 lattice sites with a combined survival probability and classification fidelity better than 99.2%. Our lattice thus serves as a locally addressable and sortable reservoir for continuous refilling of optical tweezer arrays in the future.

arXiv:2309.04717•Physical Review Letters•Jul 1, 2024•58 citations

2000-Times Repeated Imaging of Strontium Atoms in Clock-Magic Tweezer Arrays

Jacob P. Covey, Ivaylo S. Madjarov, Alexandre Cooper +1 more

We demonstrate single-atom resolved imaging with a survival probability of 0.99932(8) and a fidelity of 0.99991(1), enabling us to perform repeated high-fidelity imaging of single atoms in tweezers thousands of times. We further observe lifetimes under laser cooling of more than seven minutes, an order of magnitude longer than in previous tweezer studies. Experiments are performed with strontium atoms in 813.4 nm tweezer arrays, which is at a magic wavelength for the clock transition. Tuning to this wavelength is enabled by off-magic Sisyphus cooling on the intercombination line, which lets us choose the tweezer wavelength almost arbitrarily. We find that a single not retroreflected cooling beam in the radial direction is sufficient for mitigating recoil heating during imaging. Moreover, this cooling technique yields temperatures below 5 μK, as measured by release and recapture. Finally, we demonstrate clock-state resolved detection with average survival probability of 0.996(1) and average state detection fidelity of 0.981(1). Our work paves the way for atom-by-atom assembly of large defect-free arrays of alkaline-earth atoms, in which repeated interrogation of the clock transition is an imminent possibility.

arXiv:1811.06014•Physical Review Letters•May 1, 2019•136 citations

Single Strontium atoms trapped in optical tweezer arrays for quantum simulation

Veronica Giardini

Optical tweezer arrays of neutral atoms have emerged as a versatile and powerful platform for quantum simulation and quantum information processing. In this thesis, I present the realization of an experimental platform for quantum simulation based on individually trapped strontium atoms in optical tweezer arrays. The experiment combines precise laser cooling, optical control, and high-resolution imaging to enable the manipulation and high fidelity detection of single atoms. I developed and optimized a two-stage three-dimensional magneto-optical trap (3D-MOT) that produces cold and dense samples of strontium atoms from a thermal beam. In the f irst stage, atoms are captured and precooled using the dipole-allowed 1S0 → 1P1 transition at 461nm (which has a linewidth of !=2ω ↑ 32MHz). The second stage employs the 1S0 → 3P1 narrow intercombination transition at 689nm (with a linewidth of !=2ω ↑7.5kHz) to further cool and compress the atomic cloud. By optimizing the trapping parameters, I achieved clouds with temperatures around 5μK and densities above 1010cm→3, providing ideal initial conditions for e!cient loading into optical tweezers. A 3↑3 array of 360μK deep optical tweezers is generated by spatially modulating an 813.4nm laser beam using two crossed acousto-optic deflectors. The deflected beams are relayed and focused into the science chamber using a high–numericalaperture objective, which simultaneously serves as the collection optics for atomic f luorescence. The fluorescence light emitted by the atoms is imaged onto a scientific qCMOS camera, enabling site-resolved detection of individual atoms. I implemented and optimized the in-trap cooling dynamics to prevent atom loss during imaging and to minimize residual thermal motion. In addition, by precisely tuning lightassisted collisions, multiple atoms occupancies are removed from the traps and a single-atom regime is reached in the array, with a filling fraction of about 50%. I have demonstrated a single-atom detection fidelity of 99,986(1)% and a survival probability of 97(2)% between subsequent image acquisition, comparable to other current state-of-the-art experiments. To characterize the platform, I carried out release-and-recapture experiments, from which it is possible to measure a temperature for the individually trapped atoms of 12.95(5)μK. These results demonstrate the successful implementation of a robust and high-fidelity platform for optical trapping and imaging of single strontium atoms. The apparatus provides the foundation for future quantum simulation experiments with alkalineearth atoms excited to the Rydberg state, o"ering precise control over individual particles and the ability to scale towards larger, programmable atomic arrays.

•Jan 1, 2026•0 citations

High performance imaging of $^{171}$Yb atom in shallow clock-magic tweezer by alternating dual-tone narrowline cooling

Yunheung Song, Kangheun Kim, Jeong Ho Han +2 more

We demonstrate imaging $^{171}$Yb single atoms in clock-magic tweezers of 759.4 nm wavelength, with above 99.9% fidelity and survival. We use alternating dual-tone narrowline imaging for more efficient three-dimensional cooling in tweezers, allowing several-millisecond imaging in 200 $μ$K trap depth, which is half of typical depth used for imaging in clock-magic tweezers. Accordingly, even without repumping, imaging survival is still close to 99.9% with the high fidelity, which can enable high performance nondestructive qubit measurements based on metastable shelving. Moreover, our simulation predicts that more optimal configuration could further reduce the trap depth, as improving the imaging performance. This imaging capability in shallow traps opens high performance imaging for more general trap wavelength, and lays the foundation for large scale systems over 1,000 qubits, and highly repeatable tweezer clocks.

physics.atom-phCross-listedarXiv:2603.27498•Mar 31, 2026•0 citations

Number-resolved imaging of $^{88}$Sr atoms in a long working distance optical tweezer

Niamh Jackson, R Hanley, Matthew Hill +3 more

We demonstrate number-resolved detection of individual strontium atoms in a long working distance low numerical aperture (NA = 0.26) tweezer. Using a camera based on single-photon counting technology, we determine the presence of an atom in the tweezer with a fidelity of 0.989(6) (and loss of 0.13(5)) within a \bm{200\ \upmu} 200 μ s imaging time. Adding continuous narrow-line Sisyphus cooling yields similar fidelity, at the expense of much longer imaging times (30 ms). Under these conditions we determine whether the tweezer contains zero, one or two atoms, with a fidelity \bm{>0.8} > 0.8 in all cases, with the high readout speed of the camera enabling real-time monitoring of the number of trapped atoms. Lastly we show that the fidelity can be further improved by using a pulsed cooling/imaging scheme that reduces the effect of camera dark noise.

arXiv:1904.03233•SciPost Physics•Mar 10, 2020•15 citations
Single strontium atoms held in optical tweezers have so far only been imaged using the broad 1S0\ensuremath-1P1{}^{1}{S}_{0}{\text{\ensuremath{-}}}^{1}{P}_{1}\phantom{\rule{0.16em}{0ex}}1S0​\ensuremath-1P1​transition. For Yb, use of the narrow (183-kHz wide) 1S0\ensuremath-3P1{}^{1}{S}_{0}{\text{\ensuremath{-}}}^{3}{P}_{1}\phantom{\rule{0.16em}{0ex}}1S0​\ensuremath-3P1​transition for simultaneous imaging and cooling has been demonstrated in tweezers with a magic wavelength for the imaging transition. We demonstrate high-fidelity imaging of single Sr atoms using its even narrower (7.4-kHz wide) 1S0\ensuremath-3P1{}^{1}{S}_{0}{\text{\ensuremath{-}}}^{3}{P}_{1}\phantom{\rule{0.16em}{0ex}}1S0​\ensuremath-3P1​transition. The atoms are trapped in nonmagic-wavelength tweezers. We detect the photons scattered during Sisyphus cooling, thus keeping the atoms near the motional ground state of the tweezer throughout imaging. The fidelity of detection is 0.9991(4) with a survival probability of 0.97(2). An atom in a tweezer can be held under imaging conditions for 79(3) seconds allowing for hundreds of images to be taken, limited mainly by background gas collisions. The use of a fully closed (cycling) transition for imaging will provide a useful tool for state specific detection. We detect atoms in an array of 36 tweezers with 813.4-nm light and trap depths of 135(20) \ensuremathμ\ensuremath{\mu}\ensuremathμK. This trap depth is three times shallower than typically used for imaging on the broad 1S0\ensuremath-1P1{}^{1}{S}_{0}{\text{\ensuremath{-}}}^{1}{P}_{1}\phantom{\rule{0.16em}{0ex}}1S0​\ensuremath-1P1​transition. Narrow-line imaging opens the possibility to even further reduce this trap depth, as long as all trap frequencies are kept larger than the imaging transition linewidth. Imaging using a narrow-linewidth transition in a nonmagic-wavelength tweezer also allows for selective imaging of a given tweezer. As a demonstration, we selectively image (hide) a single tweezer from the array. This provides a useful tool for quantum error correction protocols.
Optical tweezers provide a versatile platform for the manipulation and detection of single atoms.Here, we use optical tweezers to demonstrate a set of tools for the microscopic control of atomic strontium, which has two valence electrons.Compared to the single-valence-electron atoms typically used with tweezers, strontium has a more complex internal state structure with a variety of transition wavelengths and linewidths.We report single-atom loading into an array of subwavelength scale optical tweezers and lightshift-free control of a narrow-linewidth optical transition.We use this transition to perform threedimensional ground-state cooling and to enable high-fidelity nondestructive imaging of single atoms on subwavelength spatial scales.These capabilities, combined with the rich internal structure of strontium, open new possibilities including tweezer-based metrology, new quantum computing architectures, and new paths to low-entropy many-body physics.
Recent advances in quantum simulation based on neutral atoms have largely benefited from high-resolution, single-atom sensitive imaging techniques. A variety of approaches have been developed to achieve such local detection of atoms in optical lattices or optical tweezers. For alkaline-earth and alkaline-earth-like atoms, the presence of narrow optical transitions opens up the possibility of performing novel types of Sisyphus cooling, where the cooling mechanism originates from the capability to spatially resolve the differential optical level shifts in the trap potential. Up to now, it has been an open question whether high-fidelity imaging could be achieved in a "repulsive Sisyphus" configuration, where the trap depth of the ground state exceeds that of the excited state involved in cooling. Here, we demonstrate high-fidelity (99.971(1)%) and high-survival (99.80(5)%) imaging of strontium atoms using repulsive Sisyphus cooling. We use an optical lattice as a pinning potential for atoms in a large-scale tweezer array with up to 399 tweezers and show repeated, high-fidelity lattice-tweezer-lattice transfers. We furthermore demonstrate loading the lattice with approximately 10 000 atoms directly from the MOT and scalable imaging over >10 000 lattice sites with a combined survival probability and classification fidelity better than 99.2%. Our lattice thus serves as a locally addressable and sortable reservoir for continuous refilling of optical tweezer arrays in the future.
We demonstrate single-atom resolved imaging with a survival probability of 0.99932(8) and a fidelity of 0.99991(1), enabling us to perform repeated high-fidelity imaging of single atoms in tweezers thousands of times. We further observe lifetimes under laser cooling of more than seven minutes, an order of magnitude longer than in previous tweezer studies. Experiments are performed with strontium atoms in 813.4 nm tweezer arrays, which is at a magic wavelength for the clock transition. Tuning to this wavelength is enabled by off-magic Sisyphus cooling on the intercombination line, which lets us choose the tweezer wavelength almost arbitrarily. We find that a single not retroreflected cooling beam in the radial direction is sufficient for mitigating recoil heating during imaging. Moreover, this cooling technique yields temperatures below 5 μK, as measured by release and recapture. Finally, we demonstrate clock-state resolved detection with average survival probability of 0.996(1) and average state detection fidelity of 0.981(1). Our work paves the way for atom-by-atom assembly of large defect-free arrays of alkaline-earth atoms, in which repeated interrogation of the clock transition is an imminent possibility.
Optical tweezer arrays of neutral atoms have emerged as a versatile and powerful platform for quantum simulation and quantum information processing. In this thesis, I present the realization of an experimental platform for quantum simulation based on individually trapped strontium atoms in optical tweezer arrays. The experiment combines precise laser cooling, optical control, and high-resolution imaging to enable the manipulation and high fidelity detection of single atoms. I developed and optimized a two-stage three-dimensional magneto-optical trap (3D-MOT) that produces cold and dense samples of strontium atoms from a thermal beam. In the f irst stage, atoms are captured and precooled using the dipole-allowed 1S0 → 1P1 transition at 461nm (which has a linewidth of !=2ω ↑ 32MHz). The second stage employs the 1S0 → 3P1 narrow intercombination transition at 689nm (with a linewidth of !=2ω ↑7.5kHz) to further cool and compress the atomic cloud. By optimizing the trapping parameters, I achieved clouds with temperatures around 5μK and densities above 1010cm→3, providing ideal initial conditions for e!cient loading into optical tweezers. A 3↑3 array of 360μK deep optical tweezers is generated by spatially modulating an 813.4nm laser beam using two crossed acousto-optic deflectors. The deflected beams are relayed and focused into the science chamber using a high–numericalaperture objective, which simultaneously serves as the collection optics for atomic f luorescence. The fluorescence light emitted by the atoms is imaged onto a scientific qCMOS camera, enabling site-resolved detection of individual atoms. I implemented and optimized the in-trap cooling dynamics to prevent atom loss during imaging and to minimize residual thermal motion. In addition, by precisely tuning lightassisted collisions, multiple atoms occupancies are removed from the traps and a single-atom regime is reached in the array, with a filling fraction of about 50%. I have demonstrated a single-atom detection fidelity of 99,986(1)% and a survival probability of 97(2)% between subsequent image acquisition, comparable to other current state-of-the-art experiments. To characterize the platform, I carried out release-and-recapture experiments, from which it is possible to measure a temperature for the individually trapped atoms of 12.95(5)μK. These results demonstrate the successful implementation of a robust and high-fidelity platform for optical trapping and imaging of single strontium atoms. The apparatus provides the foundation for future quantum simulation experiments with alkalineearth atoms excited to the Rydberg state, o"ering precise control over individual particles and the ability to scale towards larger, programmable atomic arrays.
High performance imaging of 171^{171}171Yb atom in shallow clock-magic tweezer by alternating dual-tone narrowline cooling
We demonstrate imaging 171^{171}171Yb single atoms in clock-magic tweezers of 759.4 nm wavelength, with above 99.9% fidelity and survival. We use alternating dual-tone narrowline imaging for more efficient three-dimensional cooling in tweezers, allowing several-millisecond imaging in 200 μμμK trap depth, which is half of typical depth used for imaging in clock-magic tweezers. Accordingly, even without repumping, imaging survival is still close to 99.9% with the high fidelity, which can enable high performance nondestructive qubit measurements based on metastable shelving. Moreover, our simulation predicts that more optimal configuration could further reduce the trap depth, as improving the imaging performance. This imaging capability in shallow traps opens high performance imaging for more general trap wavelength, and lays the foundation for large scale systems over 1,000 qubits, and highly repeatable tweezer clocks.
Number-resolved imaging of 88^{88}88Sr atoms in a long working distance optical tweezer
We demonstrate number-resolved detection of individual strontium atoms in a long working distance low numerical aperture (NA = 0.26) tweezer. Using a camera based on single-photon counting technology, we determine the presence of an atom in the tweezer with a fidelity of 0.989(6) (and loss of 0.13(5)) within a \bm{200\ \upmu} 200 μ s imaging time. Adding continuous narrow-line Sisyphus cooling yields similar fidelity, at the expense of much longer imaging times (30 ms). Under these conditions we determine whether the tweezer contains zero, one or two atoms, with a fidelity \bm{>0.8} > 0.8 in all cases, with the high readout speed of the camera enabling real-time monitoring of the number of trapped atoms. Lastly we show that the fidelity can be further improved by using a pulsed cooling/imaging scheme that reduces the effect of camera dark noise.