We demonstrate number-resolved detection of individual strontium atoms in a long working distance low numerical aperture (NA = 0.26) tweezer. Using a camera based on single-photon counting technology, we determine the presence of an atom in the tweezer with a fidelity of 0.989(6) (and loss of 0.13(5)) within a \bm{200\ \upmu} 200 μ s imaging time. Adding continuous narrow-line Sisyphus cooling yields similar fidelity, at the expense of much longer imaging times (30 ms). Under these conditions we determine whether the tweezer contains zero, one or two atoms, with a fidelity \bm{>0.8} > 0.8 in all cases, with the high readout speed of the camera enabling real-time monitoring of the number of trapped atoms. Lastly we show that the fidelity can be further improved by using a pulsed cooling/imaging scheme that reduces the effect of camera dark noise.
Number-resolved imaging of 88Sr atoms in a long working distance optical tweezer
We demonstrate number-resolved detection of individual strontium atoms in a long working distance low numerical aperture (NA = 0.26) tweezer. Using a camera based on single-photon counting technology, we determine the presence of an atom in the tweezer with a fidelity of 0.989(6) (and loss of 0.13(5)) within a \bm{200\ \upmu} 200 μ s imaging time. Adding continuous narrow-line Sisyphus cooling yields similar fidelity, at the expense of much longer imaging times (30 ms). Under these conditions we determine whether the tweezer contains zero, one or two atoms, with a fidelity \bm{>0.8} > 0.8 in all cases, with the high readout speed of the camera enabling real-time monitoring of the number of trapped atoms. Lastly we show that the fidelity can be further improved by using a pulsed cooling/imaging scheme that reduces the effect of camera dark noise.
Single strontium atoms held in optical tweezers have so far only been imaged using the broad ${}^{1}{S}_{0}{\text{\ensuremath{-}}}^{1}{P}_{1}\phantom{\rule{0.16em}{0ex}}$transition. For Yb, use of the narrow (183-kHz wide) ${}^{1}{S}_{0}{\text{\ensuremath{-}}}^{3}{P}_{1}\phantom{\rule{0.16em}{0ex}}$transition for simultaneous imaging and cooling has been demonstrated in tweezers with a magic wavelength for the imaging transition. We demonstrate high-fidelity imaging of single Sr atoms using its even narrower (7.4-kHz wide) ${}^{1}{S}_{0}{\text{\ensuremath{-}}}^{3}{P}_{1}\phantom{\rule{0.16em}{0ex}}$transition. The atoms are trapped in nonmagic-wavelength tweezers. We detect the photons scattered during Sisyphus cooling, thus keeping the atoms near the motional ground state of the tweezer throughout imaging. The fidelity of detection is 0.9991(4) with a survival probability of 0.97(2). An atom in a tweezer can be held under imaging conditions for 79(3) seconds allowing for hundreds of images to be taken, limited mainly by background gas collisions. The use of a fully closed (cycling) transition for imaging will provide a useful tool for state specific detection. We detect atoms in an array of 36 tweezers with 813.4-nm light and trap depths of 135(20) $\ensuremath{\mu}$K. This trap depth is three times shallower than typically used for imaging on the broad ${}^{1}{S}_{0}{\text{\ensuremath{-}}}^{1}{P}_{1}\phantom{\rule{0.16em}{0ex}}$transition. Narrow-line imaging opens the possibility to even further reduce this trap depth, as long as all trap frequencies are kept larger than the imaging transition linewidth. Imaging using a narrow-linewidth transition in a nonmagic-wavelength tweezer also allows for selective imaging of a given tweezer. As a demonstration, we selectively image (hide) a single tweezer from the array. This provides a useful tool for quantum error correction protocols.
We demonstrate single-atom resolved imaging with a survival probability of 0.99932(8) and a fidelity of 0.99991(1), enabling us to perform repeated high-fidelity imaging of single atoms in tweezers thousands of times. We further observe lifetimes under laser cooling of more than seven minutes, an order of magnitude longer than in previous tweezer studies. Experiments are performed with strontium atoms in 813.4 nm tweezer arrays, which is at a magic wavelength for the clock transition. Tuning to this wavelength is enabled by off-magic Sisyphus cooling on the intercombination line, which lets us choose the tweezer wavelength almost arbitrarily. We find that a single not retroreflected cooling beam in the radial direction is sufficient for mitigating recoil heating during imaging. Moreover, this cooling technique yields temperatures below 5 μK, as measured by release and recapture. Finally, we demonstrate clock-state resolved detection with average survival probability of 0.996(1) and average state detection fidelity of 0.981(1). Our work paves the way for atom-by-atom assembly of large defect-free arrays of alkaline-earth atoms, in which repeated interrogation of the clock transition is an imminent possibility.
Recent advances in quantum simulation based on neutral atoms have largely benefited from high-resolution, single-atom sensitive imaging techniques. A variety of approaches have been developed to achieve such local detection of atoms in optical lattices or optical tweezers. For alkaline-earth and alkaline-earth-like atoms, the presence of narrow optical transitions opens up the possibility of performing novel types of Sisyphus cooling, where the cooling mechanism originates from the capability to spatially resolve the differential optical level shifts in the trap potential. Up to now, it has been an open question whether high-fidelity imaging could be achieved in a "repulsive Sisyphus" configuration, where the trap depth of the ground state exceeds that of the excited state involved in cooling. Here, we demonstrate high-fidelity (99.971(1)%) and high-survival (99.80(5)%) imaging of strontium atoms using repulsive Sisyphus cooling. We use an optical lattice as a pinning potential for atoms in a large-scale tweezer array with up to 399 tweezers and show repeated, high-fidelity lattice-tweezer-lattice transfers. We furthermore demonstrate loading the lattice with approximately 10 000 atoms directly from the MOT and scalable imaging over >10 000 lattice sites with a combined survival probability and classification fidelity better than 99.2%. Our lattice thus serves as a locally addressable and sortable reservoir for continuous refilling of optical tweezer arrays in the future.
Optical tweezer arrays of neutral atoms have emerged as a versatile and powerful platform for quantum simulation and quantum information processing. In this thesis, I present the realization of an experimental platform for quantum simulation based on individually trapped strontium atoms in optical tweezer arrays. The experiment combines precise laser cooling, optical control, and high-resolution imaging to enable the manipulation and high fidelity detection of single atoms. I developed and optimized a two-stage three-dimensional magneto-optical trap (3D-MOT) that produces cold and dense samples of strontium atoms from a thermal beam. In the f irst stage, atoms are captured and precooled using the dipole-allowed 1S0 → 1P1 transition at 461nm (which has a linewidth of !=2ω ↑ 32MHz). The second stage employs the 1S0 → 3P1 narrow intercombination transition at 689nm (with a linewidth of !=2ω ↑7.5kHz) to further cool and compress the atomic cloud. By optimizing the trapping parameters, I achieved clouds with temperatures around 5μK and densities above 1010cm→3, providing ideal initial conditions for e!cient loading into optical tweezers. A 3↑3 array of 360μK deep optical tweezers is generated by spatially modulating an 813.4nm laser beam using two crossed acousto-optic deflectors. The deflected beams are relayed and focused into the science chamber using a high–numericalaperture objective, which simultaneously serves as the collection optics for atomic f luorescence. The fluorescence light emitted by the atoms is imaged onto a scientific qCMOS camera, enabling site-resolved detection of individual atoms. I implemented and optimized the in-trap cooling dynamics to prevent atom loss during imaging and to minimize residual thermal motion. In addition, by precisely tuning lightassisted collisions, multiple atoms occupancies are removed from the traps and a single-atom regime is reached in the array, with a filling fraction of about 50%. I have demonstrated a single-atom detection fidelity of 99,986(1)% and a survival probability of 97(2)% between subsequent image acquisition, comparable to other current state-of-the-art experiments. To characterize the platform, I carried out release-and-recapture experiments, from which it is possible to measure a temperature for the individually trapped atoms of 12.95(5)μK. These results demonstrate the successful implementation of a robust and high-fidelity platform for optical trapping and imaging of single strontium atoms. The apparatus provides the foundation for future quantum simulation experiments with alkalineearth atoms excited to the Rydberg state, o"ering precise control over individual particles and the ability to scale towards larger, programmable atomic arrays.
Scalable atom-based quantum platforms for simulation, computing, and metrology require fast high-fidelity, low-loss imaging of individual atoms. Standard fluorescence detection methods rely on continuous cooling, limiting the detection range to one atom and imposing long imaging times that constrain the experimental cycle and midcircuit conditional operations. Here, we demonstrate fast and low-loss single-atom imaging in optical tweezers without active cooling, enabled by the favorable properties of ytterbium. Collecting fluorescence over microsecond timescales, we reach single-atom discrimination fidelities above 99.9% and single-shot survival probabilities above 99.5%. Through interleaved recooling pulses, as short as a few hundred microseconds for atoms in magic traps, we perform tens of consecutive detections with constant atom-retention probability per image-an essential step toward fast atom reuse in tweezer-based processors and clocks. Our scheme does not induce parity projection in multiply occupied traps, enabling number-resolved single-shot detection of several atoms per site. This allows us to study the near-deterministic preparation of single atoms in tweezers driven by blue-detuned light-assisted collisions. Moreover, the near-diffraction-limited spatial resolution of our low-loss imaging enables number-resolved microscopy in dense arrays, opening the way to direct site-occupancy readout in optical lattices for density fluctuation and correlation measurements in quantum simulators.
Subwavelength atomic tweezer arrays, in which atoms can be positioned at distances smaller than their emission wavelength, have been proposed as a versatile platform to study collective emission phenomena, such as superradiance and subradiance. Experimentally, the realization of such arrays has been a challenge as typical emission wavelengths in the visible or near-infrared are short compared to typical tweezer spacings in the micrometer range. Here, we use 88Sr atoms in optical tweezer arrays to access a mid-infrared transition at 2,923 nm (5s5p3P2→5s4d3D3). We identify a magic trapping wavelength at 597.14(3) nm and demonstrate single-atom preparation and imaging with high fidelity. In addition, using 2,923 nm light, we demonstrate resolved-sideband cooling of tweezer-trapped strontium. Beyond enabling studies of collective emission phenomena in flexible arrangements of atoms, our platform opens novel opportunities for dipolar many-body physics and enhanced control over Rydberg dynamics and the strontium fine-structure qubit.