Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2201.12337 · PRX Quantum

Encoding Qubits in Multimode Grid States

Baptiste Royer, Shraddha Singh, S. M. Girvin

Published Mar 7, 2022• 41 citations
arXivHTMLPDF

Abstract

Encoding logical quantum information in harmonic oscillator modes is a promising and hardwareefficient approach to the realization of a quantum computer.In this work, we propose to encode logical qubits in grid states of an ensemble of harmonic oscillator modes.We first discuss general results about these multimode bosonic codes; how to design them, how to practically implement them in different experimental platforms, and how lattice symmetries can be leveraged to perform logical non-Clifford operations.We then introduce in detail two two-mode grid codes based on the hypercubic and D 4 lattices, respectively, showing how to perform a universal set of logical operations.We demonstrate numerically that multimode grid codes have, compared to their single-mode counterpart, increased robustness against propagation of errors from ancillas used for error correction.Finally, we highlight some interesting links between multidimensional lattices and single-mode grid codes concatenated with qubit codes.

DOI
10.1103/prxquantum.3.010335

Related papers

Hardware-Efficient Fault Tolerant Quantum Computing with Bosonic Grid States in Superconducting Circuits

Marc-Antoine Lemonde, Dany Lachance-Quirion, Guillaume Duclos-Cianci +5 more

Quantum computing holds the promise of solving classically intractable problems. Enabling this requires scalable and hardware-efficient quantum processors with vanishing error rates. This perspective manuscript describes how bosonic codes, particularly grid state encodings, offer a pathway to scalable fault-tolerant quantum computing in superconducting circuits. By leveraging the large Hilbert space of bosonic modes, quantum error correction can operate at the single physical unit level, therefore reducing drastically the hardware requirements to bring fault-tolerant quantum computing to scale. Going beyond the well-known Gottesman-Kitaev-Preskill (GKP) code, we discuss how using multiple bosonic modes to encode a single qubit offers increased protection against control errors and enhances its overall error-correcting capabilities. Given recent successful demonstrations of critical components of this architecture, we argue that it offers the shortest path to achieving fault tolerance in gate-based quantum computing processors with a MHz logical clock rate.

arXiv:2409.05813•Sep 9, 2024•1 citation

Bosonic Quantum Error Correction with Neutral Atoms in Optical Dipole Traps

Leon H. Bohnmann, David F. Locher, Zeiher, Johannes +1 more

Bosonic quantum error correction codes encode logical qubits in the Hilbert space of one or multiple harmonic oscillators. A prominent class of bosonic codes is that of Gottesman-Kitaev-Preskill (GKP) codes of which implementations have been demonstrated with trapped ions and microwave cavities. In this paper, we investigate theoretically the preparation and error correction of a GKP qubit in a vibrational mode of a neutral atom stored in an optical dipole trap. This platform has recently shown remarkable progress in simultaneously controlling the motional and electronic degrees of freedom of trapped atoms. The protocols we develop make use of motional states and, additionally, internal electronic states of the trapped atom to serve as an ancilla qubit. We compare optical tweezer arrays and optical lattices and find that the latter provide more flexible control over the confinement in the out-of-plane direction, which can be utilized to optimize the conditions for the implementation of GKP codes. Concretely, the different frequency scales that the harmonic oscillators in the axial and radial lattice directions exhibit and a small oscillator anharmonicity prove to be beneficial for robust encodings of GKP states. Finally, we underpin the experimental feasibility of the proposed protocols by numerically simulating the preparation of GKP qubits in an optical lattice with realistic parameters.

arXiv:2408.14251•Aug 26, 2024•0 citations

Optimal encoding of oscillators into more oscillators

Jing Wu, Anthony J. Brady, Quntao Zhuang

Bosonic encoding of quantum information into harmonic oscillators is a hardware efficient approach to battle noise. In this regard, oscillator-to-oscillator codes not only provide an additional opportunity in bosonic encoding, but also extend the applicability of error correction to continuous-variable states ubiquitous in quantum sensing and communication. In this work, we derive the optimal oscillator-to-oscillator codes among the general family of Gottesman-Kitaev-Preskill (GKP)-stablizer codes for homogeneous noise. We prove that an arbitrary GKP-stabilizer code can be reduced to a generalized GKP two-mode-squeezing (TMS) code. The optimal encoding to minimize the geometric mean error can be constructed from GKP-TMS codes with an optimized GKP lattice and TMS gains. For single-mode data and ancilla, this optimal code design problem can be efficiently solved, and we further provide numerical evidence that a hexagonal GKP lattice is optimal and strictly better than the previously adopted square lattice. For the multimode case, general GKP lattice optimization is challenging. In the two-mode data and ancilla case, we identify the D4 lattice—a 4-dimensional dense-packing lattice—to be superior to a product of lower dimensional lattices. As a by-product, the code reduction allows us to prove a universal no-threshold-theorem for arbitrary oscillators-to-oscillators codes based on Gaussian encoding, even when the ancilla are not GKP states.

arXiv:2212.11970•Quantum•Aug 16, 2023•8 citations

Bosonic quantum error correction with neutral atoms in optical dipole traps

Leon H. Bohnmann, David F. Locher, Johannes Zeiher +1 more

Bosonic quantum error correction codes encode logical qubits in the Hilbert space of one or multiple harmonic oscillators. A prominent class of bosonic codes is that of Gottesman-Kitaev-Preskill (GKP) codes of which implementations have been demonstrated with trapped ions and microwave cavities. In this paper, we investigate theoretically the preparation and error correction of a GKP qubit in a vibrational mode of a neutral atom stored in an optical dipole trap. This platform has recently shown remarkable progress in simultaneously controlling the motional and electronic degrees of freedom of trapped atoms. The protocols we develop make use of motional states and, additionally, internal electronic states of the trapped atom to serve as an ancilla qubit. We compare optical tweezer arrays and optical lattices and find that the latter provide more flexible control over the confinement in the out-of-plane direction, which can be utilized to optimize the conditions for the implementation of GKP codes. Concretely, the different frequency scales that the harmonic oscillators in the axial and radial lattice directions exhibit and a small oscillator anharmonicity prove to be beneficial for robust encodings of GKP states. Finally, we underpin the experimental feasibility of the proposed protocols by numerically simulating the preparation of GKP qubits in an optical lattice with realistic parameters.

Physical Review A•Feb 19, 2025•11 citations

Quantum Computation and Communication in Bosonic Systems

Kyungjoo Noh

Quantum computation and communication are important branches of quantum information science. However, noise in realistic quantum devices fundamentally limits the utility of these quantum technologies. A conventional approach towards large-scale and fault-tolerant quantum information processing is to use multi-qubit quantum error correction (QEC), that is, to encode a logical quantum bit (or a logical qubit) redundantly over many physical qubits such that the redundancy can be used to detect errors. The required resource overhead associated with the use of conventional multi-qubit QEC schemes, however, is too high for these schemes to be realized at scale with currently available quantum devices. Recently, bosonic (or continuous-variable) quantum error correction has risen as a promising hardware-efficient alternative to multi-qubit QEC schemes. In this thesis, I provide an overview of bosonic QEC and present my contributions to the field. Specifically, I present the benchmark and optimization results of various single-mode bosonic codes against practically relevant excitation loss errors. I also demonstrate that fault-tolerant bosonic QEC is possible by concatenating a single-mode bosonic code with a multi-qubit error-correcting code. Moreover, I discuss the fundamental aspects of bosonic QEC using the framework of quantum communication theory. In particular, I present improved bounds on important communication-theoretic quantities such as the quantum capacity of bosonic Gaussian channels. Furthermore, I provide explicit bosonic error correction schemes that nearly achieve the fundamental performance limit set by the quantum capacity. I conclude the thesis with discussions on the importance of non-Gaussian resources for continuous-variable quantum information processing.

arXiv:2103.09445•Mar 17, 2021•2 citations

Conditional-not Displacement: Fast Multioscillator Control with a Single Qubit

Asaf A. Diringer, Eliya Blumenthal, Avishay Grinberg +2 more

Bosonic encoding is an approach for quantum information processing, promising lower hardware overhead by encoding in the many levels of a harmonic-oscillator mode. Scaling to multiple modes requires weak interaction for independent control, yet strong interaction for fast control. Applying fast and efficient universal control on multiple modes remains an open problem. Surprisingly, we find that displacements conditioned on the state of a single-qubit ancilla coupled to multiple harmonic oscillators are sufficient for universal control. We present the conditional- operation concept, which can be used to reduce the duration of entangling gates. Within this guiding concept, we develop the conditional- displacement control method which enables fast generation and control of bosonic states in multimode systems weakly coupled to a single-ancilla qubit. Our method is fast despite the weak ancilla coupling. The weak coupling in turn allows for excellent separability and thus independent control. We demonstrate our control on a superconducting transmon qubit weakly coupled to a multimode superconducting cavity. We create both entangled and separable cat states in different modes of the multimode cavity, showing entangling operations at low crosstalk while maintaining independent control of the different modes. We show that the operation time is not limited by the inverse of the coupling rate, which is the typical timescale, and we exceed it by almost 2 orders of magnitude. We verify our results with an efficient method for measurement of the multimode characteristic function which employs our conditional- displacement. Our results inspire a new approach toward general entangling operations and allow for fast and efficient multimode bosonic encoding and measurement. Published by the American Physical Society 2024

arXiv:2301.09831•Physical Review X•Mar 26, 2024•27 citations
Encoding logical quantum information in harmonic oscillator modes is a promising and hardwareefficient approach to the realization of a quantum computer.In this work, we propose to encode logical qubits in grid states of an ensemble of harmonic oscillator modes.We first discuss general results about these multimode bosonic codes; how to design them, how to practically implement them in different experimental platforms, and how lattice symmetries can be leveraged to perform logical non-Clifford operations.We then introduce in detail two two-mode grid codes based on the hypercubic and D 4 lattices, respectively, showing how to perform a universal set of logical operations.We demonstrate numerically that multimode grid codes have, compared to their single-mode counterpart, increased robustness against propagation of errors from ancillas used for error correction.Finally, we highlight some interesting links between multidimensional lattices and single-mode grid codes concatenated with qubit codes.
Quantum computing holds the promise of solving classically intractable problems. Enabling this requires scalable and hardware-efficient quantum processors with vanishing error rates. This perspective manuscript describes how bosonic codes, particularly grid state encodings, offer a pathway to scalable fault-tolerant quantum computing in superconducting circuits. By leveraging the large Hilbert space of bosonic modes, quantum error correction can operate at the single physical unit level, therefore reducing drastically the hardware requirements to bring fault-tolerant quantum computing to scale. Going beyond the well-known Gottesman-Kitaev-Preskill (GKP) code, we discuss how using multiple bosonic modes to encode a single qubit offers increased protection against control errors and enhances its overall error-correcting capabilities. Given recent successful demonstrations of critical components of this architecture, we argue that it offers the shortest path to achieving fault tolerance in gate-based quantum computing processors with a MHz logical clock rate.
Bosonic quantum error correction codes encode logical qubits in the Hilbert space of one or multiple harmonic oscillators. A prominent class of bosonic codes is that of Gottesman-Kitaev-Preskill (GKP) codes of which implementations have been demonstrated with trapped ions and microwave cavities. In this paper, we investigate theoretically the preparation and error correction of a GKP qubit in a vibrational mode of a neutral atom stored in an optical dipole trap. This platform has recently shown remarkable progress in simultaneously controlling the motional and electronic degrees of freedom of trapped atoms. The protocols we develop make use of motional states and, additionally, internal electronic states of the trapped atom to serve as an ancilla qubit. We compare optical tweezer arrays and optical lattices and find that the latter provide more flexible control over the confinement in the out-of-plane direction, which can be utilized to optimize the conditions for the implementation of GKP codes. Concretely, the different frequency scales that the harmonic oscillators in the axial and radial lattice directions exhibit and a small oscillator anharmonicity prove to be beneficial for robust encodings of GKP states. Finally, we underpin the experimental feasibility of the proposed protocols by numerically simulating the preparation of GKP qubits in an optical lattice with realistic parameters.
Bosonic encoding of quantum information into harmonic oscillators is a hardware efficient approach to battle noise. In this regard, oscillator-to-oscillator codes not only provide an additional opportunity in bosonic encoding, but also extend the applicability of error correction to continuous-variable states ubiquitous in quantum sensing and communication. In this work, we derive the optimal oscillator-to-oscillator codes among the general family of Gottesman-Kitaev-Preskill (GKP)-stablizer codes for homogeneous noise. We prove that an arbitrary GKP-stabilizer code can be reduced to a generalized GKP two-mode-squeezing (TMS) code. The optimal encoding to minimize the geometric mean error can be constructed from GKP-TMS codes with an optimized GKP lattice and TMS gains. For single-mode data and ancilla, this optimal code design problem can be efficiently solved, and we further provide numerical evidence that a hexagonal GKP lattice is optimal and strictly better than the previously adopted square lattice. For the multimode case, general GKP lattice optimization is challenging. In the two-mode data and ancilla case, we identify the D4 lattice—a 4-dimensional dense-packing lattice—to be superior to a product of lower dimensional lattices. As a by-product, the code reduction allows us to prove a universal no-threshold-theorem for arbitrary oscillators-to-oscillators codes based on Gaussian encoding, even when the ancilla are not GKP states.
Bosonic quantum error correction codes encode logical qubits in the Hilbert space of one or multiple harmonic oscillators. A prominent class of bosonic codes is that of Gottesman-Kitaev-Preskill (GKP) codes of which implementations have been demonstrated with trapped ions and microwave cavities. In this paper, we investigate theoretically the preparation and error correction of a GKP qubit in a vibrational mode of a neutral atom stored in an optical dipole trap. This platform has recently shown remarkable progress in simultaneously controlling the motional and electronic degrees of freedom of trapped atoms. The protocols we develop make use of motional states and, additionally, internal electronic states of the trapped atom to serve as an ancilla qubit. We compare optical tweezer arrays and optical lattices and find that the latter provide more flexible control over the confinement in the out-of-plane direction, which can be utilized to optimize the conditions for the implementation of GKP codes. Concretely, the different frequency scales that the harmonic oscillators in the axial and radial lattice directions exhibit and a small oscillator anharmonicity prove to be beneficial for robust encodings of GKP states. Finally, we underpin the experimental feasibility of the proposed protocols by numerically simulating the preparation of GKP qubits in an optical lattice with realistic parameters.
Quantum computation and communication are important branches of quantum information science. However, noise in realistic quantum devices fundamentally limits the utility of these quantum technologies. A conventional approach towards large-scale and fault-tolerant quantum information processing is to use multi-qubit quantum error correction (QEC), that is, to encode a logical quantum bit (or a logical qubit) redundantly over many physical qubits such that the redundancy can be used to detect errors. The required resource overhead associated with the use of conventional multi-qubit QEC schemes, however, is too high for these schemes to be realized at scale with currently available quantum devices. Recently, bosonic (or continuous-variable) quantum error correction has risen as a promising hardware-efficient alternative to multi-qubit QEC schemes. In this thesis, I provide an overview of bosonic QEC and present my contributions to the field. Specifically, I present the benchmark and optimization results of various single-mode bosonic codes against practically relevant excitation loss errors. I also demonstrate that fault-tolerant bosonic QEC is possible by concatenating a single-mode bosonic code with a multi-qubit error-correcting code. Moreover, I discuss the fundamental aspects of bosonic QEC using the framework of quantum communication theory. In particular, I present improved bounds on important communication-theoretic quantities such as the quantum capacity of bosonic Gaussian channels. Furthermore, I provide explicit bosonic error correction schemes that nearly achieve the fundamental performance limit set by the quantum capacity. I conclude the thesis with discussions on the importance of non-Gaussian resources for continuous-variable quantum information processing.
Bosonic encoding is an approach for quantum information processing, promising lower hardware overhead by encoding in the many levels of a harmonic-oscillator mode. Scaling to multiple modes requires weak interaction for independent control, yet strong interaction for fast control. Applying fast and efficient universal control on multiple modes remains an open problem. Surprisingly, we find that displacements conditioned on the state of a single-qubit ancilla coupled to multiple harmonic oscillators are sufficient for universal control. We present the conditional- operation concept, which can be used to reduce the duration of entangling gates. Within this guiding concept, we develop the conditional- displacement control method which enables fast generation and control of bosonic states in multimode systems weakly coupled to a single-ancilla qubit. Our method is fast despite the weak ancilla coupling. The weak coupling in turn allows for excellent separability and thus independent control. We demonstrate our control on a superconducting transmon qubit weakly coupled to a multimode superconducting cavity. We create both entangled and separable cat states in different modes of the multimode cavity, showing entangling operations at low crosstalk while maintaining independent control of the different modes. We show that the operation time is not limited by the inverse of the coupling rate, which is the typical timescale, and we exceed it by almost 2 orders of magnitude. We verify our results with an efficient method for measurement of the multimode characteristic function which employs our conditional- displacement. Our results inspire a new approach toward general entangling operations and allow for fast and efficient multimode bosonic encoding and measurement. Published by the American Physical Society 2024