Quantum computation and communication are important branches of quantum information science. However, noise in realistic quantum devices fundamentally limits the utility of these quantum technologies. A conventional approach towards large-scale and fault-tolerant quantum information processing is to use multi-qubit quantum error correction (QEC), that is, to encode a logical quantum bit (or a logical qubit) redundantly over many physical qubits such that the redundancy can be used to detect errors. The required resource overhead associated with the use of conventional multi-qubit QEC schemes, however, is too high for these schemes to be realized at scale with currently available quantum devices. Recently, bosonic (or continuous-variable) quantum error correction has risen as a promising hardware-efficient alternative to multi-qubit QEC schemes. In this thesis, I provide an overview of bosonic QEC and present my contributions to the field. Specifically, I present the benchmark and optimization results of various single-mode bosonic codes against practically relevant excitation loss errors. I also demonstrate that fault-tolerant bosonic QEC is possible by concatenating a single-mode bosonic code with a multi-qubit error-correcting code. Moreover, I discuss the fundamental aspects of bosonic QEC using the framework of quantum communication theory. In particular, I present improved bounds on important communication-theoretic quantities such as the quantum capacity of bosonic Gaussian channels. Furthermore, I provide explicit bosonic error correction schemes that nearly achieve the fundamental performance limit set by the quantum capacity. I conclude the thesis with discussions on the importance of non-Gaussian resources for continuous-variable quantum information processing.
Quantum computation and communication are important branches of quantum information science. However, noise in realistic quantum devices fundamentally limits the utility of these quantum technologies. A conventional approach towards large-scale and fault-tolerant quantum information processing is to use multi-qubit quantum error correction (QEC), that is, to encode a logical quantum bit (or a logical qubit) redundantly over many physical qubits such that the redundancy can be used to detect errors. The required resource overhead associated with the use of conventional multi-qubit QEC schemes, however, is too high for these schemes to be realized at scale with currently available quantum devices. Recently, bosonic (or continuous-variable) quantum error correction has risen as a promising hardware-efficient alternative to multi-qubit QEC schemes. In this thesis, I provide an overview of bosonic QEC and present my contributions to the field. Specifically, I present the benchmark and optimization results of various single-mode bosonic codes against practically relevant excitation loss errors. I also demonstrate that fault-tolerant bosonic QEC is possible by concatenating a single-mode bosonic code with a multi-qubit error-correcting code. Moreover, I discuss the fundamental aspects of bosonic QEC using the framework of quantum communication theory. In particular, I present improved bounds on important communication-theoretic quantities such as the quantum capacity of bosonic Gaussian channels. Furthermore, I provide explicit bosonic error correction schemes that nearly achieve the fundamental performance limit set by the quantum capacity. I conclude the thesis with discussions on the importance of non-Gaussian resources for continuous-variable quantum information processing.
Fault-tolerant quantum computation with bosonic qubits often necessitates the use of noisy discrete-variable ancillae. In this work, we establish a comprehensive and practical fault-tolerance framework for such a hybrid system and synthesize it with fault-tolerant protocols by combining bosonic quantum error correction (QEC) and advanced quantum control techniques. We introduce essential building blocks of error-corrected gadgets by leveraging ancilla-assisted bosonic operations using a generalized variant of path-independent quantum control. Using these building blocks, we construct a universal set of error-corrected gadgets that tolerate a single-photon loss and an arbitrary ancilla fault for four-legged cat qubits. Notably, our construction requires only dispersive coupling between bosonic modes and ancillae, as well as beam-splitter coupling between bosonic modes, both of which have been experimentally demonstrated with strong strengths and high accuracy. Moreover, each error-corrected bosonic qubit is comprised of only a single bosonic mode and a three-level ancilla, featuring the hardware efficiency of bosonic QEC in the full fault-tolerant setting. We numerically demonstrate the feasibility of our schemes using current experimental parameters in the circuit-QED platform. Finally, we present a hardware-efficient architecture for fault-tolerant quantum computing by concatenating the four-legged cat qubits with an outer qubit code utilizing only beam-splitter couplings. Our estimates suggest that the overall noise threshold can be reached using existing hardware. These developed fault-tolerant schemes extend beyond their applicability to four-legged cat qubits and can be adapted for other rotation-symmetrical codes, offering a promising avenue toward scalable and robust quantum computation with bosonic qubits. Published by the American Physical Society 2024
Fault-tolerant quantum computation with bosonic qubits often necessitates the use of noisy discrete-variable ancillae. In this work, we establish a comprehensive and practical fault-tolerance framework for such a hybrid system and synthesize it with fault-tolerant protocols by combining bosonic quantum error correction (QEC) and advanced quantum control techniques. We introduce essential building blocks of error-corrected gadgets by leveraging ancilla-assisted bosonic operations using a generalized variant of path-independent quantum control. Using these building blocks, we construct a universal set of error-corrected gadgets that tolerate a single-photon loss and an arbitrary ancilla fault for four-legged cat qubits. Notably, our construction requires only dispersive coupling between bosonic modes and ancillae, as well as beam-splitter coupling between bosonic modes, both of which have been experimentally demonstrated with strong strengths and high accuracy. Moreover, each error-corrected bosonic qubit is comprised of only a single bosonic mode and a three-level ancilla, featuring the hardware efficiency of bosonic QEC in the full fault-tolerant setting. We numerically demonstrate the feasibility of our schemes using current experimental parameters in the circuit-QED platform. Finally, we present a hardware-efficient architecture for fault-tolerant quantum computing by concatenating the four-legged cat qubits with an outer qubit code utilizing only beam-splitter couplings. Our estimates suggest that the overall noise threshold can be reached using existing hardware. These developed fault-tolerant schemes extend beyond their applicability to four-legged cat qubits and can be adapted for other rotation-symmetrical codes, offering a promising avenue toward scalable and robust quantum computation with bosonic qubits.
(Abridged.) This thesis investigates scalable fault-tolerant quantum computation through the development of bosonic quantum codes, quantum LDPC codes, and decoding protocols that connect continuous-variable and discrete-variable error correction. We investigate superconducting microwave implementations of continuous-variable quantum computing, including the deterministic generation of cubic phase states, and introduce the dissipatively stabilized squeezed cat qubit, a noise-biased bosonic encoding with enhanced error suppression and faster gates. The performance of rotation-symmetric and GKP codes is analyzed under realistic noise and measurement models, revealing key trade-offs in measurement-based schemes. To integrate bosonic codes into larger architectures, we develop decoding methods that exploit analog syndrome information, enabling quasi-single-shot decoding in concatenated systems. On the discrete-variable side, we introduce localized statistics decoding, a highly parallelizable decoder for quantum LDPC codes, and propose quantum radial codes, a new family of single-shot LDPC codes with low overhead and strong circuit-level performance. Finally, we present fault complexes, a homological framework for analyzing faults in dynamic quantum error correction protocols. Extending the role of homology in static CSS codes, fault complexes provide a general language for the design and analysis of fault-tolerant schemes.
Quantum information is vulnerable to environmental noise and experimental imperfections, hindering the reliability of practical quantum information processors. Therefore, quantum error correction (QEC) that can protect quantum information against noise is vital for universal and scalable quantum computation. Among many different experimental platforms, superconducting quantum circuits and bosonic encodings in superconducting microwave modes are appealing for their unprecedented potential in QEC. During the last few years, bosonic QEC is demonstrated to reach the break-even point, i.e. the lifetime of a logical qubit is enhanced to exceed that of any individual components composing the experimental system. Beyond that, universal gate sets and fault-tolerant operations on the bosonic codes are also realized, pushing quantum information processing towards the QEC era. In this article, we review the recent progress of the bosonic codes, including the Gottesman-Kitaev-Preskill codes, cat codes, and binomial codes, and discuss the opportunities of bosonic codes in various quantum applications, ranging from fault-tolerant quantum computation to quantum metrology. We also summarize the challenges associated with the bosonic codes and provide an outlook for the potential research directions in the long terms.
Abstract The unique features of quantum theory offer a powerful new paradigm for information processing. Translating these mathematical abstractions into useful algorithms and applications requires quantum systems with significant complexity and sufficiently low error rates. Such quantum systems must be made from robust hardware that can coherently store, process, and extract the encoded information, as well as possess effective quantum error correction (QEC) protocols to detect and correct errors. Circuit quantum electrodynamics (cQED) provides a promising hardware platform for implementing robust quantum devices. In particular, bosonic encodings in cQED that use multi-photon states of superconducting cavities to encode information have shown success in realizing hardware-efficient QEC. Here, we review recent developments in the theory and implementation of QEC with bosonic codes and report the progress made toward realizing fault-tolerant quantum information processing with cQED devices.
Quantum computers promise to solve computational problems that are inaccessible to classical machines. The reliable execution of large-scale quantum algorithms requires robust operations in the presence of noise. Quantum error correction addresses this challenge by encoding quantum information redundantly across several physical qubits, such that errors can be detected and corrected during a computation. However, no single error-correcting code intrinsically supports an inherently robust, fault-tolerant implementation of all gates needed for universal quantum computing. Moreover, most modern approaches to both quantum error correction and the implementation of universal logical operations on encoded qubits rely on mid-circuit measurements and feed-forward control. These types of operations are technologically demanding, often slow, and prone to high error rates, and they limit the overall success probability of quantum algorithms. In this thesis, we develop fault-tolerant protocols and circuits for quantum error correction and universal logical computation, with an emphasis on implementations compatible with current hardware systems. We first focus on fault-tolerant quantum error correction on small codes. By comparing different protocols, we identify trade-offs between compact circuit constructions and their robustness to noise. We then assess their practical performance by comparing numerical simulations of noisy circuits with experimental data. Beyond the preservation of encoded information, we study how universal logic can be implemented in a fault-tolerant manner on encoded qubits. A central approach considered in this thesis is code switching, in which logical information is transferred between two distinct error-correcting codes that support complementary sets of inherently fault-tolerant logical gates. In combination, these codes give access to a complete universal fault-tolerant logical gate set. In this thesis, we determine conditions that allow us to construct fault-tolerant protocols for code switching. We adapt these protocols to the capabilities of current hardware, thereby enabling the first experimental realization of universal fault-tolerant logic by means of code switching. However, the overall performance of these schemes is limited by slow and noisy mid-circuit measurements. To address this bottleneck, we construct a suite of measurement-free fault-tolerant universal operations that do not require any measurements during the execution of an algorithm. In this framework, error correction and logical operations are implemented coherently as part of the quantum circuit, without mid-circuit measurements or in-sequence classical control. We introduce measurement-free code-switching schemes that can be scaled to arbitrary code distances through concatenation, and which thereby provide, in principle, arbitrarily strong error suppression. We further tailor our approach to the capabilities of current trapped-ion quantum processors. New circuit constructions support the first experimental implementation of a logical quantum algorithm without mid-circuit measurements, demonstrated through Grover's search on three encoded qubits. Together, the results of this thesis expand the toolbox for early fault-tolerant quantum computation. They show how protocols for quantum error correction and universal logical gates can be designed without mid-circuit measurements with realistic hardware constraints in mind, opening new pathways towards universal quantum logic.