Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2112.05821 · IEEE International Symposium on High-Performance Computer Architecture (HPCA)

VAQEM: A Variational Approach to Quantum Error Mitigation

Gokul Subramanian Ravi, Kaitlin N. Smith, Pranav Gokhale, Andrea Mari, Nathan Earnest, Ali Javadi-Abhari, Frederic T. Chong

Published Apr 1, 2022• 2 citations
arXivHTMLPDF

Abstract

Variational Quantum Algorithms (VQA) are one of the most promising candidates for near-term quantum advantage. Traditionally, these algorithms are parameterized by rotational gate angles whose values are tuned over iterative execution on quantum machines. The iterative tuning of these gate angle parameters make VQAs more robust to a quantum machine’s noise profile. However, the effect of noise is still a significant detriment to VQA’s target estimations on real quantum machines — they are far from ideal. Thus, it is imperative to employ effective error mitigation strategies to improve the fidelity of these quantum algorithms on near-term machines.While existing error mitigation techniques built from theory do provide substantial gains, the disconnect between theory and real machine execution characteristics limit the scope of these improvements. Thus, it is critical to optimize mitigation techniques to explicitly suit the target application as well as the noise characteristics of the target machine.We propose VAQEM, which dynamically tailors existing error mitigation techniques to the actual, dynamic noisy execution characteristics of VQAs on a target quantum machine. We do so by tuning specific features of these mitigation techniques similar to the traditional rotation angle parameters -by targeting improvements towards a specific objective function which represents the VQA problem at hand. In this paper, we target two types of error mitigation techniques which are suited to idle times in quantum circuits: single qubit gate scheduling and the insertion of dynamical decoupling sequences. We gain substantial improvements to VQA objective measurements — a mean of over 3x across a variety of VQA applications, run on IBM Quantum machines.More importantly, while we study two specific error mitigation techniques, the proposed variational approach is general and can be extended to many other error mitigation techniques whose specific configurations are hard to select a priori. Integrating more mitigation techniques into the VAQEM framework in the future can lead to further formidable gains, potentially realizing practically useful VQA benefits on today’s noisy quantum machines.

DOI
10.1109/hpca53966.2022.00029

Related papers

VAQEM: A Variational Approach to Quantum Error Mitigation

Gokul Subramanian Ravi, Kaitlin N. Smith, Pranav Gokhale +4 more

Variational Quantum Algorithms (VQA) are one of the most promising candidates for near-term quantum advantage. Traditionally, these algorithms are parameterized by rotational gate angles whose values are tuned over iterative execution on quantum machines. The iterative tuning of these gate angle parameters make VQAs more robust to a quantum machine's noise profile. However, the effect of noise is still a significant detriment to VQA's target estimations on real quantum machines - they are far from ideal. Thus, it is imperative to employ effective error mitigation strategies to improve the fidelity of these quantum algorithms on near-term machines.While existing error mitigation techniques built from theory do provide substantial gains, the disconnect between theory and real machine execution characteristics limit the scope of these improvements. Thus, it is critical to optimize mitigation techniques to explicitly suit the target application as well as the noise characteristics of the target machine.We propose VAQEM, which dynamically tailors existing error mitigation techniques to the actual, dynamic noisy execution characteristics of VQAs on a target quantum machine. We do so by tuning specific features of these mitigation techniques similar to the traditional rotation angle parameters -by targeting improvements towards a specific objective function which represents the VQA problem at hand. In this paper, we target two types of error mitigation techniques which are suited to idle times in quantum circuits: single qubit gate scheduling and the insertion of dynamical decoupling sequences. We gain substantial improvements to VQA objective measurements - a mean of over 3x across a variety of VQA applications, run on IBM Quantum machines.More importantly, while we study two specific error mitigation techniques, the proposed variational approach is general and can be extended to many other error mitigation techniques whose specific configurations are hard to select a priori. Integrating more mitigation techniques into the VAQEM framework in the future can lead to further formidable gains, potentially realizing practically useful VQA benefits on today's noisy quantum machines.

•Jan 1, 2022•41 citations

Measurement Error Mitigation for Variational Quantum Algorithms

George S. Barron, Christopher J. Wood

Variational Quantum Algorithms (VQAs) are a promising application for near-term quantum processors, however the quality of their results is greatly limited by noise. For this reason, various error mitigation techniques have emerged to deal with noise that can be applied to these algorithms. Recent work introduced a technique for mitigating expectation values against correlated measurement errors that can be applied to measurements of 10s of qubits. We apply these techniques to VQAs and demonstrate its effectiveness in improving estimates to the cost function. Moreover, we use the data resulting from this technique to experimentally characterize measurement errors in terms of the device connectivity on devices of up to 20 qubits. These results should be useful for better understanding the near-term potential of VQAs as well as understanding the correlations in measurement errors on large, near-term devices.

arXiv:2010.08520•Bulletin of the American Physical Society•Oct 16, 2020•41 citations

Machine Learning-based Quantum Error Mitigation for Variational Algorithms

Nikita Korolev, Kirill Lakhmanskiy, Daniil Rabinovich

Machine Learning-based quantum error mitigation (ML-QEM) has emerged as a promising approach for improving the performance of noisy quantum algorithms. However, existing ML-QEM methods often have restricted applicability to variational circuits and rely on inaccessible noiseless training data. In this work, we propose a practical ML-QEM protocol tailored to variational quantum algorithms, which generates training data by simulating (near-)Clifford circuits. This data is used for model selection and training, producing a mitigation model that can correct variational circuits with arbitrary parameters and transfer across different target Hamiltonians of similar structure. We benchmark the proposed method on the Variational Quantum Eigensolver (VQE) task for the Sherrington-Kirkpatrick Hamiltonian of up to $n=12$ qubits under various noise models, analyzing its effect on trainability and comparing its performance against standard Zero-Noise Extrapolation (ZNE). The results demonstrate consistent several-fold error suppression across all tested settings and superior performance over ZNE in the high-noise regime, providing evidence for the applicability of the proposed protocol to present-day NISQ processors.

quant-pharXiv:2606.02697•Jun 3, 2026•0 citations

Error-Mitigation-Aided Optimization of Parameterized Quantum Circuits: Convergence Analysis

Sharu Theresa Jose, Osvaldo Simeone

Variational quantum algorithms (VQAs) offer the most promising path to obtaining quantum advantages via noisy intermediate-scale quantum (NISQ) processors. Such systems leverage classical optimization to tune the parameters of a parameterized quantum circuit (PQC). The goal is minimizing a cost function that depends on measurement outputs obtained from the PQC. Optimization is typically implemented via stochastic gradient descent (SGD). On NISQ computers, gate noise due to imperfections and decoherence affects the stochastic gradient estimates by introducing a bias. Quantum error mitigation (QEM) techniques can reduce the estimation bias without requiring any increase in the number of qubits, but they in turn cause an increase in the variance of the gradient estimates. This work studies the impact of quantum gate noise on the convergence of SGD for the variational eigensolver (VQE), a fundamental instance of VQAs. The main goal is ascertaining conditions under which QEM can enhance the performance of SGD for VQEs. It is shown that quantum gate noise induces a nonzero error-floor on the convergence error of SGD (evaluated with respect to a reference noiseless PQC), which depends on the number of noisy gates, the strength of the noise, as well as the eigenspectrum of the observable being measured and minimized. In contrast, with QEM, any arbitrarily small error can be obtained. Furthermore, for error levels attainable with or without QEM, QEM can reduce the number of required iterations, but only as long as the quantum noise level is sufficiently large, and a sufficiently large number of measurements is allowed at each SGD iteration. Numerical examples for a max-cut problem corroborate the main theoretical findings.

arXiv:2209.11514•IEEE Transactions on Quantum Engineering•Jan 1, 2022•16 citations

VarSaw: Application-tailored Measurement Error Mitigation for Variational Quantum Algorithms

Siddharth Dangwal, Gokul Subramanian Ravi, Poulami Das +3 more

For potential quantum advantage, Variational Quantum Algorithms (VQAs) need high accuracy beyond the capability of today's NISQ devices, and thus will benefit from error mitigation. In this work we are interested in mitigating measurement errors which occur during qubit measurements after circuit execution and tend to be the most error-prone operations, especially detrimental to VQAs. Prior work, JigSaw, has shown that measuring only small subsets of circuit qubits at a time and collecting results across all such `subset' circuits can reduce measurement errors. Then, running the entire (`global') original circuit and extracting the qubit-qubit measurement correlations can be used in conjunction with the subsets to construct a high-fidelity output distribution of the original circuit. Unfortunately, the execution cost of JigSaw scales polynomially in the number of qubits in the circuit, and when compounded by the number of circuits and iterations in VQAs, the resulting execution cost quickly turns insurmountable.

arXiv:2306.06027•International Conference on Architectural Support for Programming Languages and Operating Systems (ASPLOS)•Mar 25, 2023•14 citations

Variational noise mitigation in quantum circuits: the case of Quantum Fourier Transform

Rafael Gómez-Lurbe, Alexander Bernal, Armando Pérez +2 more

We propose using variational quantum algorithms (VQAs) to simulate established quantum algorithms under realistic noise conditions, aiming to surpass the fidelity of theoretical circuits in noisy environments. Focusing on the Quantum Fourier Transform (QFT), we perform numerical simulations for two qubits under both coherent and incoherent noise. To enhance generalization, we further introduce the use of Mutually Unbiased Bases (MUBs) during the optimization. Our results show that the variational circuit can reproduce the QFT with higher fidelity in scenarios dominated by coherent noise. This demonstrates the potential of the approach as an effective error-mitigation strategy for small- to medium-scale quantum systems, particularly in settings where coherent noise strongly impacts performance. Beyond mitigating noise and improving fidelity, the method can be adapted to the noise profile of a specific device, providing a versatile and practical route to enhance the reliability of quantum algorithms in near-term quantum hardware.

quant-pharXiv:2511.05274•Quantum Science and Technology•Nov 10, 2025•0 citations
Variational Quantum Algorithms (VQA) are one of the most promising candidates for near-term quantum advantage. Traditionally, these algorithms are parameterized by rotational gate angles whose values are tuned over iterative execution on quantum machines. The iterative tuning of these gate angle parameters make VQAs more robust to a quantum machine’s noise profile. However, the effect of noise is still a significant detriment to VQA’s target estimations on real quantum machines — they are far from ideal. Thus, it is imperative to employ effective error mitigation strategies to improve the fidelity of these quantum algorithms on near-term machines.While existing error mitigation techniques built from theory do provide substantial gains, the disconnect between theory and real machine execution characteristics limit the scope of these improvements. Thus, it is critical to optimize mitigation techniques to explicitly suit the target application as well as the noise characteristics of the target machine.We propose VAQEM, which dynamically tailors existing error mitigation techniques to the actual, dynamic noisy execution characteristics of VQAs on a target quantum machine. We do so by tuning specific features of these mitigation techniques similar to the traditional rotation angle parameters -by targeting improvements towards a specific objective function which represents the VQA problem at hand. In this paper, we target two types of error mitigation techniques which are suited to idle times in quantum circuits: single qubit gate scheduling and the insertion of dynamical decoupling sequences. We gain substantial improvements to VQA objective measurements — a mean of over 3x across a variety of VQA applications, run on IBM Quantum machines.More importantly, while we study two specific error mitigation techniques, the proposed variational approach is general and can be extended to many other error mitigation techniques whose specific configurations are hard to select a priori. Integrating more mitigation techniques into the VAQEM framework in the future can lead to further formidable gains, potentially realizing practically useful VQA benefits on today’s noisy quantum machines.
Variational Quantum Algorithms (VQA) are one of the most promising candidates for near-term quantum advantage. Traditionally, these algorithms are parameterized by rotational gate angles whose values are tuned over iterative execution on quantum machines. The iterative tuning of these gate angle parameters make VQAs more robust to a quantum machine's noise profile. However, the effect of noise is still a significant detriment to VQA's target estimations on real quantum machines - they are far from ideal. Thus, it is imperative to employ effective error mitigation strategies to improve the fidelity of these quantum algorithms on near-term machines.While existing error mitigation techniques built from theory do provide substantial gains, the disconnect between theory and real machine execution characteristics limit the scope of these improvements. Thus, it is critical to optimize mitigation techniques to explicitly suit the target application as well as the noise characteristics of the target machine.We propose VAQEM, which dynamically tailors existing error mitigation techniques to the actual, dynamic noisy execution characteristics of VQAs on a target quantum machine. We do so by tuning specific features of these mitigation techniques similar to the traditional rotation angle parameters -by targeting improvements towards a specific objective function which represents the VQA problem at hand. In this paper, we target two types of error mitigation techniques which are suited to idle times in quantum circuits: single qubit gate scheduling and the insertion of dynamical decoupling sequences. We gain substantial improvements to VQA objective measurements - a mean of over 3x across a variety of VQA applications, run on IBM Quantum machines.More importantly, while we study two specific error mitigation techniques, the proposed variational approach is general and can be extended to many other error mitigation techniques whose specific configurations are hard to select a priori. Integrating more mitigation techniques into the VAQEM framework in the future can lead to further formidable gains, potentially realizing practically useful VQA benefits on today's noisy quantum machines.
Variational Quantum Algorithms (VQAs) are a promising application for near-term quantum processors, however the quality of their results is greatly limited by noise. For this reason, various error mitigation techniques have emerged to deal with noise that can be applied to these algorithms. Recent work introduced a technique for mitigating expectation values against correlated measurement errors that can be applied to measurements of 10s of qubits. We apply these techniques to VQAs and demonstrate its effectiveness in improving estimates to the cost function. Moreover, we use the data resulting from this technique to experimentally characterize measurement errors in terms of the device connectivity on devices of up to 20 qubits. These results should be useful for better understanding the near-term potential of VQAs as well as understanding the correlations in measurement errors on large, near-term devices.
Machine Learning-based quantum error mitigation (ML-QEM) has emerged as a promising approach for improving the performance of noisy quantum algorithms. However, existing ML-QEM methods often have restricted applicability to variational circuits and rely on inaccessible noiseless training data. In this work, we propose a practical ML-QEM protocol tailored to variational quantum algorithms, which generates training data by simulating (near-)Clifford circuits. This data is used for model selection and training, producing a mitigation model that can correct variational circuits with arbitrary parameters and transfer across different target Hamiltonians of similar structure. We benchmark the proposed method on the Variational Quantum Eigensolver (VQE) task for the Sherrington-Kirkpatrick Hamiltonian of up to n=12n=12n=12 qubits under various noise models, analyzing its effect on trainability and comparing its performance against standard Zero-Noise Extrapolation (ZNE). The results demonstrate consistent several-fold error suppression across all tested settings and superior performance over ZNE in the high-noise regime, providing evidence for the applicability of the proposed protocol to present-day NISQ processors.
Variational quantum algorithms (VQAs) offer the most promising path to obtaining quantum advantages via noisy intermediate-scale quantum (NISQ) processors. Such systems leverage classical optimization to tune the parameters of a parameterized quantum circuit (PQC). The goal is minimizing a cost function that depends on measurement outputs obtained from the PQC. Optimization is typically implemented via stochastic gradient descent (SGD). On NISQ computers, gate noise due to imperfections and decoherence affects the stochastic gradient estimates by introducing a bias. Quantum error mitigation (QEM) techniques can reduce the estimation bias without requiring any increase in the number of qubits, but they in turn cause an increase in the variance of the gradient estimates. This work studies the impact of quantum gate noise on the convergence of SGD for the variational eigensolver (VQE), a fundamental instance of VQAs. The main goal is ascertaining conditions under which QEM can enhance the performance of SGD for VQEs. It is shown that quantum gate noise induces a nonzero error-floor on the convergence error of SGD (evaluated with respect to a reference noiseless PQC), which depends on the number of noisy gates, the strength of the noise, as well as the eigenspectrum of the observable being measured and minimized. In contrast, with QEM, any arbitrarily small error can be obtained. Furthermore, for error levels attainable with or without QEM, QEM can reduce the number of required iterations, but only as long as the quantum noise level is sufficiently large, and a sufficiently large number of measurements is allowed at each SGD iteration. Numerical examples for a max-cut problem corroborate the main theoretical findings.
For potential quantum advantage, Variational Quantum Algorithms (VQAs) need high accuracy beyond the capability of today's NISQ devices, and thus will benefit from error mitigation. In this work we are interested in mitigating measurement errors which occur during qubit measurements after circuit execution and tend to be the most error-prone operations, especially detrimental to VQAs. Prior work, JigSaw, has shown that measuring only small subsets of circuit qubits at a time and collecting results across all such `subset' circuits can reduce measurement errors. Then, running the entire (`global') original circuit and extracting the qubit-qubit measurement correlations can be used in conjunction with the subsets to construct a high-fidelity output distribution of the original circuit. Unfortunately, the execution cost of JigSaw scales polynomially in the number of qubits in the circuit, and when compounded by the number of circuits and iterations in VQAs, the resulting execution cost quickly turns insurmountable.
We propose using variational quantum algorithms (VQAs) to simulate established quantum algorithms under realistic noise conditions, aiming to surpass the fidelity of theoretical circuits in noisy environments. Focusing on the Quantum Fourier Transform (QFT), we perform numerical simulations for two qubits under both coherent and incoherent noise. To enhance generalization, we further introduce the use of Mutually Unbiased Bases (MUBs) during the optimization. Our results show that the variational circuit can reproduce the QFT with higher fidelity in scenarios dominated by coherent noise. This demonstrates the potential of the approach as an effective error-mitigation strategy for small- to medium-scale quantum systems, particularly in settings where coherent noise strongly impacts performance. Beyond mitigating noise and improving fidelity, the method can be adapted to the noise profile of a specific device, providing a versatile and practical route to enhance the reliability of quantum algorithms in near-term quantum hardware.