We present a unified approach to study continuous measurement-based quantum thermal machines in static as well as adiabatically driven systems. We investigate both steady-state and transient dynamics for the time-independent case. In the adiabatically driven case, we show how measurement-based thermodynamic quantities can be attributed geometric characteristics. We also provide the appropriate definition for heat transfer and dissipation owing to continuous measurement in the presence and absence of adiabatic driving. We illustrate the aforementioned ideas and study the phenomenon of refrigeration in two different paradigmatic examples: a coupled quantum dot and a coupled qubit system, both undergoing continuous measurement and slow driving. In the time-independent case, we show that quantum coherence can improve the cooling power of measurement-based quantum refrigerators. Exclusively for the case of coupled qubits, we consider linear as well as nonlinear system-bath couplings. We observe that nonlinear coupling produces cooling effects in certain regimes where otherwise heating is expected. In the adiabatically driven case, we observe that quantum measurement can provide significant boost to the power of adiabatic quantum refrigerators. We also observe that the obtained boost can be larger than the sum of power due to individual effects. The measurement-based refrigerators can have similar or better coefficient of performance in the driven case compared to the static one in the regime where heat extraction is maximum. Our results have potential significance for future application in devices ranging from measurement-based quantum thermal machines to refrigeration in quantum processing networks.
We present a unified approach to study continuous measurement-based quantum thermal machines in static as well as adiabatically driven systems. We investigate both steady-state and transient dynamics for the time-independent case. In the adiabatically driven case, we show how measurement-based thermodynamic quantities can be attributed geometric characteristics. We also provide the appropriate definition for heat transfer and dissipation owing to continuous measurement in the presence and absence of adiabatic driving. We illustrate the aforementioned ideas and study the phenomenon of refrigeration in two different paradigmatic examples: a coupled quantum dot and a coupled qubit system, both undergoing continuous measurement and slow driving. In the time-independent case, we show that quantum coherence can improve the cooling power of measurement-based quantum refrigerators. Exclusively for the case of coupled qubits, we consider linear as well as nonlinear system-bath couplings. We observe that nonlinear coupling produces cooling effects in certain regimes where otherwise heating is expected. In the adiabatically driven case, we observe that quantum measurement can provide significant boost to the power of adiabatic quantum refrigerators. We also observe that the obtained boost can be larger than the sum of power due to individual effects. The measurement-based refrigerators can have similar or better coefficient of performance in the driven case compared to the static one in the regime where heat extraction is maximum. Our results have potential significance for future application in devices ranging from measurement-based quantum thermal machines to refrigeration in quantum processing networks.
We investigated coupled-qubit-based thermal machines powered by quantum measurements and feedback. We considered two different versions of the machine: (1) a quantum Maxwell's demon, where the coupled-qubit system is connected to a detachable single shared bath, and (2) a measurement-assisted refrigerator, where the coupled-qubit system is in contact with a hot and cold bath. In the quantum Maxwell's demon case, we discuss both discrete and continuous measurements. We found that the power output from a single qubit-based device can be improved by coupling it to the second qubit. We further found that the simultaneous measurement of both qubits can produce higher net heat extraction compared to two setups operated in parallel where only single-qubit measurements are performed. In the refrigerator case, we used continuous measurement and unitary operations to power the coupled-qubit-based refrigerator. We found that the cooling power of a refrigerator operated with swap operations can be enhanced by performing suitable measurements.
The study of nanoscopic thermal devices attracts an increasing attention, not only because of their key role in understanding the emergence of thermodynamics from quantum theory, but also for the potential use of quantum-mechanical thermal cycles, especially refrigerators, in quantum technologies. This thesis, is devoted to the performance optimization of autonomous (heat-driven) refrigerators. For a quantum refrigerator, one has a full microscopic description of the simple system serving as a working medium, and of its interaction with the external heat baths. This enables a consistent `finite-time? thermodynamic analysis, not relying on any phenomenological assumptions about the leading sources of irreversibility, and allows to establish arguably general performance bounds, essential to benchmark the operation of realistic devices. In particular, tight and model-independent upper bounds for the coefficient of performance at maximum power, are derived here for a class of strongly coupled refrigerators, and seen to hold more generally for other types of heat and power-driven cycles. Remarkably, these ultimate limitations only depend on the particulars of the system-baths interaction at the interface with the object to be cooled. Strategies might be then defined so as to saturate those limits: It is shown how the working medium of the refrigerator may be, for instance, scaled up into a parallel multi-stage configuration, resembling that of macroscopic multi-effect absorption chillers, as a means to increase its cooling power. Similarly, by applying reservoir engineering techniques on selected transitions between the energy states of the working medium, one can mimic exploitable non-equilibrium fluctuations in the baths, capable of boosting the overall power and COP beyond what would be otherwise allowed by the second law of thermodynamics. In this way, heat-driven chillers could be set to compete on a equal footing with the best power-driven refrigerators.
The performance enhancements observed in various models of continuous quantum thermal machines have been linked to the buildup of coherences in a preferred basis. But is this connection always an evidence of "quantum-thermodynamic supremacy"? By force of example, we show that this is not the case. In particular, we compare a power-driven three-level continuous quantum refrigerator with a four-level combined cycle, partly driven by power and partly by heat. We focus on the weak driving regime and find the four-level model to be superior since it can operate in parameter regimes in which the three-level model cannot and it may exhibit a larger cooling rate and, simultaneously, a better coefficient of performance. Furthermore, we find that the improvement in the cooling rate matches the increase in the stationary quantum coherences exactly. Crucially, though, we also show that the thermodynamic variables for both models follow from a classical representation based on graph theory. This implies that we can build incoherent stochastic-thermodynamic models with the same steady-state operation or, equivalently, that both coherent refrigerators can be emulated classically. More generally, we prove this for any N-level weakly driven device with a "cyclic" pattern of transitions. Therefore, even if coherence is present in a specific quantum thermal machine, it is often not essential to replicate the underlying energy conversion process.
The study of quantum thermodynamics is key to the development of quantum thermal machines. In contrast to most of the previous proposals based on discrete strokes, here we consider a working substance that is permanently coupled to two or more baths at different temperatures and continuously driven. To this end, we investigate parametrically driven quantum harmonic oscillators coupled to heat baths via a collision model. Using a thermodynamically consistent local master equation, we derive the heat flows and power of the working device, which can operate as an engine, refrigerator, or accelerator, and analyze the instantaneous and average efficiencies and coefficients of performance. Studying the regimes of both slow and fast driving of the system, we find that an increased driving frequency can lead to a change of functioning to a dissipator. Finally, we investigate the effect of squeezing one of the thermal baths: it leads to an apparent higher efficiency compared to the corresponding Carnot value of an equilibrium bath with the same temperature and to sustained entanglement between the working substance oscillators in the limit cycle.
While quantum measurements have been shown to constitute a resource for operating quantum thermal machines, the nature of the energy exchanges involved in the interaction between system and measuring apparatus is still under debate. In this work, we show that a microscopic model of the apparatus is necessary to unambiguously determine whether quantum measurements provide energy in the form of heat or work. We illustrate this result by considering a measurement-based refrigerator, made of a double quantum dot embedded in a two-terminal device, with the charge of one of the dots being continuously monitored. Tuning the parameters of the measurement device interpolates between heat- and work-fueled regimes with very different thermodynamic efficiency. Notably, we demonstrate a trade-off between a maximal thermodynamic efficiency when the measurement-based refrigerator is fueled by heat and a maximal measurement efficiency quantified by the signal-to-noise ratio in the work-fueled regime. Our analysis sheds light on the nature of the energy exchanges occurring during a quantum measurement, paving the way for energy optimization in quantum protocols and quantum machines.
We investigated quantum thermal machines powered by sequential nonselective generalized measurements, taking a double quantum dot with coherent interdot tunneling as a working substance. In this platform, the competition between detuning and tunneling hybridizes the localized states and modifies the energetic response of the cycle, allowing us to analyze measurement-driven thermodynamics beyond simple diagonal qubit models. We formulate a three-stroke cycle composed of thermalization with a single reservoir and two generalized measurement channels, and derive the corresponding internal-energy and entropy variations in order to identify the operational regimes of the device. Depending on the measurement parameters, the system can operate as a heat engine, accelerator, heater, or refrigerator. We show that the introduction of tunneling not only reshapes the boundaries between these modes, but also generates refrigeration configurations that are absent in the purely detuned model. In addition, the performance maps reveal that temperature, detuning, and tunneling amplitude jointly control the most favorable regions for work extraction and cooling. Our results demonstrate that coherent interdot coupling acts as an important resource for optimizing measurement-powered quantum thermal machines and highlight double quantum dots as a promising setting for experimentally relevant implementations of measurement-assisted thermodynamic devices.