Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2112.01425 · Physical Review A

Analysis of loss correction with the Gottesman-Kitaev-Preskill code

Jacob Hastrup, Ulrik L. Andersen

Published Nov 15, 2023• 12 citations
arXivHTMLPDF

Abstract

The Gottesman-Kitaev-Preskill (GKP) code is a promising bosonic quantum error-correcting code, encoding logical qubits into a bosonic mode in such a way that many physically relevant noise types can be corrected effectively. A particularly relevant noise channel is the pure loss channel, which the GKP code is known to protect against. In particular, it is commonly pointed out that losses can be corrected by the GKP code by transforming the losses into random Gaussian displacements through a quantum-limited amplification channel. However, implementing such amplification in practice is not ideal and could easily introduce an additional overhead of noise from associated experimental imperfections. Here, we analyze the performance of teleportation-based GKP error correction against loss in the absence of an amplification channel. We show that amplification is not required to perform GKP error correction and that performing amplification actually worsens the performance for practically relevant parameter regimes.

DOI
10.1103/physreva.108.052413

Related papers

Probabilistic Error Cancellation for Single-Mode Gottesman-Kitaev-Preskill Codes

Victoria Wadewitz, Alessandro Ciani

In order to solve practical problems on a quantum computer, it is necessary to use fault-tolerant quantum error correction schemes to overcome noise: the errors arising from imperfections in physical components. The Gottesman-Kitaev-Preskill (GKP) code aims at achieving this in a hardware efficient manner by encoding finite-dimensional logical subspaces in the Hilbert space of one or more continuous variable modes. In near term implementations, however, it is not feasible to eliminate errors entirely, so it is natural to also employ alternative error mitigation techniques together with error correction. In this work, we study a quantum error mitigation method known as probabilistic error cancellation in the context of the GKP code. We compare Steane-type and teleportation-based GKP error correction, and calculate the sampling overheads associated with the technique for square and hexagonal GKP codes. We employ the stabilizer subsystem decomposition for GKP codes to obtain an effective logical channel for noisy operations that is used to express the ideal one of a target logical unitary. We consider noise from finite squeezing on the data and the two ancilla modes, needed for error correction, and examine the relationship between the sampling overhead and the noise for different decoding methods. Our results are calculated for single- and two-qubit GKP Clifford gates and one round of error correction, and show the nontrivial combination of error correction and mitigation in continuous variable codes.

quant-pharXiv:2609.17095•Sep 16, 2026•0 citations

Performance and Achievable Rates of the Gottesman-Kitaev-Preskill Code for Pure-Loss and Amplification Channels

Guo Zheng, Wenhao He, Gideon Lee +2 more

Quantum error-correction codes protect information from realistic noisy channels and lie at the heart of quantum computation and communication tasks. Understanding the optimal performance and other information-theoretic properties, such as the achievable rates, of a given code is crucial, as these factors determine the fundamental limits imposed by the encoding in conjunction with the noise channel. Here, we use the transpose channel to analytically obtain the near-optimal performance of any Gottesman-Kitaev-Preskill (GKP) code under pure loss and pure amplification. We present rigorous connections between GKP code’s near-optimal performance and its dual lattice geometry and average input energy. With no energy constraint, we show that when | τ / ( 1 − τ ) | is an integer, specific families of GKP codes simultaneously achieve the loss and amplification capacity. τ is the transmissivity (gain) for loss (amplification). Our results establish GKP code as the first structured bosonic code family that achieves the capacity of loss and amplification.

arXiv:2412.06715•PRX Quantum•Jul 1, 2025•4 citations

Correcting biased noise using Gottesman-Kitaev-Preskill repetition code with noisy ancilla

Z. Li, Daiqin Su

Concatenation of a bosonic code with a qubit code is one of the promising ways to achieve fault-tolerant quantum computation. As one of the most important bosonic codes, the Gottesman-Kitaev-Preskill (GKP) code is proposed to correct small displacement errors in phase space. If the noise in phase space is biased, the square-lattice GKP code can be concatenated with the repetition code that promises a high fault-tolerant threshold to suppress the logical error. In this work, we study the performance of GKP repetition codes with finite-energy ancillary GKP qubits in correcting biased noise. We find that there exists a critical value of noise variance for the ancillary GKP qubit such that the logical Pauli error rate decreases when increasing the code size. Furthermore, one round of GKP error correction has to be performed before concatenating with the repetition code. Our study paves the way for practical implementation of error correction by concatenating the GKP code with low-level qubit codes.

arXiv:2308.01549•Physical Review A•May 13, 2024•2 citations

Performance Analysis of Quantum GKP Error Correction Code Under Noisy Environment

M. Samin Salek, M.A.Mosabbir Antor, Md. Saifur Rahman

Gottesman-Kitaev-Preskill (GKP) Codes tend to address one of the most challenging tasks for Quantum Communication of correcting the erroneous quantum bits. This paper focuses on analyzing the performance of this code under thermal displacement noise. GKP-encoded quantum memory under repeated error-correction cycles was simulated using the Strawberry Fields Bosonic simulator via finite energy approximation of the GKP state. We evaluate the logical-state fidelity as a function of correction cycles and noise strength, and analyze the effectiveness of error correction. Our results illustrate the robustness limits of GKP-based memory under realistic noise and highlight the dependence of logical performance on displacement noise variance, providing insight into practical continuous-variable quantum error correction.

IEEE International Conference on Quantum Photonics, Artificial Intelligence & Networking (QPAIN)•Apr 16, 2026•0 citations

Gottesman-Kitaev-Preskill error-correction with decohered resources

Rajendra S. Bhati, T. Bazylewicz, Jarosław K. Korbicz

Teleportation-based Gottesman-Kitaev-Preskill (GKP) error correction typically assumes a decoherence-free GKP ancilla Bell pair, an idealization that is difficult to reconcile with the ubiquitous environmental decoherence in bosonic systems. Here, we analyze the performance of the GKP protocol subject to pure-dephasing processes, ubiquitous in realistic situations. We show that, under this class of interactions, teleportation, instead of projecting the input onto the GKP subspace, transforms GKP error correction into a correlated Pauli-Gaussian noise process that can accumulate over successive correction rounds. Thus, unlike in previously studied noisy GKP scenarios, the code no longer self-corrects. Moreover, repeated noisy GKP teleportation drives the encoded modes out of the logical subspace, progressively degrading the encoded codewords. We show that the resulting leakage rapidly saturates with the number of correction rounds. Finally, we investigate the implications of our results for motional-oscillator-based GKP error-correction platforms.

quant-pharXiv:2609.31462•Sep 28, 2026•0 citations

Concatenation of the Gottesman-Kitaev-Preskill code with the XZZX surface code

Jiaxuan Zhang, Yu-Chun Wu, Guo‐Ping Guo

Bosonic codes provide an alternative option for quantum error correction. An important category of bosonic codes called the Gottesman-Kitaev-Preskill (GKP) code has aroused much interest recently. Theoretically, the error correction ability of the GKP code is limited since it can only correct small shift errors in position and momentum quadratures. A natural approach to promote the GKP error correction for large-scale, fault-tolerant quantum computation is concatenating encoded GKP states with a stabilizer code. The performance of the XZZX surface-GKP code, i.e., the single-mode GKP code concatenated with the XZZX surface code is investigated in this paper under two different noise models. Firstly, in the code-capacity noise model, the asymmetric rectangular GKP code with parameter $\ensuremath{\lambda}$ is introduced. Using the minimum weight perfect matching decoder combined with the continuous-variable GKP information, the optimal threshold of the XZZX-surface GKP code reaches $\ensuremath{\sigma}\ensuremath{\approx}0.67$ when $\ensuremath{\lambda}=2.1$, compared with the threshold $\ensuremath{\sigma}\ensuremath{\approx}0.60$ of the standard surface-GKP code. Secondly, we analyze the shift errors of two-qubit gates in the actual implementation and build the full circuit-level noise model. By setting the appropriate bias parameters, the logical error rate is reduced by several times in some cases. These results indicate the XZZX surface-GKP codes are more suitable for asymmetric concatenation under the general noise models. We also estimate the overhead of the XZZX-surface GKP code which uses about 291 GKP states with the noise parameter 18.5 dB ($\ensuremath{\kappa}/g\ensuremath{\approx}0.71%$) to encode a logical qubit with the error rate $2.53\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}7}$, compared with the qubit-based surface code using 3041 qubits to achieve almost the same logical error rate.

arXiv:2207.04383•Physical Review A•Jun 9, 2023•16 citations
The Gottesman-Kitaev-Preskill (GKP) code is a promising bosonic quantum error-correcting code, encoding logical qubits into a bosonic mode in such a way that many physically relevant noise types can be corrected effectively. A particularly relevant noise channel is the pure loss channel, which the GKP code is known to protect against. In particular, it is commonly pointed out that losses can be corrected by the GKP code by transforming the losses into random Gaussian displacements through a quantum-limited amplification channel. However, implementing such amplification in practice is not ideal and could easily introduce an additional overhead of noise from associated experimental imperfections. Here, we analyze the performance of teleportation-based GKP error correction against loss in the absence of an amplification channel. We show that amplification is not required to perform GKP error correction and that performing amplification actually worsens the performance for practically relevant parameter regimes.
In order to solve practical problems on a quantum computer, it is necessary to use fault-tolerant quantum error correction schemes to overcome noise: the errors arising from imperfections in physical components. The Gottesman-Kitaev-Preskill (GKP) code aims at achieving this in a hardware efficient manner by encoding finite-dimensional logical subspaces in the Hilbert space of one or more continuous variable modes. In near term implementations, however, it is not feasible to eliminate errors entirely, so it is natural to also employ alternative error mitigation techniques together with error correction. In this work, we study a quantum error mitigation method known as probabilistic error cancellation in the context of the GKP code. We compare Steane-type and teleportation-based GKP error correction, and calculate the sampling overheads associated with the technique for square and hexagonal GKP codes. We employ the stabilizer subsystem decomposition for GKP codes to obtain an effective logical channel for noisy operations that is used to express the ideal one of a target logical unitary. We consider noise from finite squeezing on the data and the two ancilla modes, needed for error correction, and examine the relationship between the sampling overhead and the noise for different decoding methods. Our results are calculated for single- and two-qubit GKP Clifford gates and one round of error correction, and show the nontrivial combination of error correction and mitigation in continuous variable codes.
Quantum error-correction codes protect information from realistic noisy channels and lie at the heart of quantum computation and communication tasks. Understanding the optimal performance and other information-theoretic properties, such as the achievable rates, of a given code is crucial, as these factors determine the fundamental limits imposed by the encoding in conjunction with the noise channel. Here, we use the transpose channel to analytically obtain the near-optimal performance of any Gottesman-Kitaev-Preskill (GKP) code under pure loss and pure amplification. We present rigorous connections between GKP code’s near-optimal performance and its dual lattice geometry and average input energy. With no energy constraint, we show that when | τ / ( 1 − τ ) | is an integer, specific families of GKP codes simultaneously achieve the loss and amplification capacity. τ is the transmissivity (gain) for loss (amplification). Our results establish GKP code as the first structured bosonic code family that achieves the capacity of loss and amplification.
Concatenation of a bosonic code with a qubit code is one of the promising ways to achieve fault-tolerant quantum computation. As one of the most important bosonic codes, the Gottesman-Kitaev-Preskill (GKP) code is proposed to correct small displacement errors in phase space. If the noise in phase space is biased, the square-lattice GKP code can be concatenated with the repetition code that promises a high fault-tolerant threshold to suppress the logical error. In this work, we study the performance of GKP repetition codes with finite-energy ancillary GKP qubits in correcting biased noise. We find that there exists a critical value of noise variance for the ancillary GKP qubit such that the logical Pauli error rate decreases when increasing the code size. Furthermore, one round of GKP error correction has to be performed before concatenating with the repetition code. Our study paves the way for practical implementation of error correction by concatenating the GKP code with low-level qubit codes.
Gottesman-Kitaev-Preskill (GKP) Codes tend to address one of the most challenging tasks for Quantum Communication of correcting the erroneous quantum bits. This paper focuses on analyzing the performance of this code under thermal displacement noise. GKP-encoded quantum memory under repeated error-correction cycles was simulated using the Strawberry Fields Bosonic simulator via finite energy approximation of the GKP state. We evaluate the logical-state fidelity as a function of correction cycles and noise strength, and analyze the effectiveness of error correction. Our results illustrate the robustness limits of GKP-based memory under realistic noise and highlight the dependence of logical performance on displacement noise variance, providing insight into practical continuous-variable quantum error correction.
Teleportation-based Gottesman-Kitaev-Preskill (GKP) error correction typically assumes a decoherence-free GKP ancilla Bell pair, an idealization that is difficult to reconcile with the ubiquitous environmental decoherence in bosonic systems. Here, we analyze the performance of the GKP protocol subject to pure-dephasing processes, ubiquitous in realistic situations. We show that, under this class of interactions, teleportation, instead of projecting the input onto the GKP subspace, transforms GKP error correction into a correlated Pauli-Gaussian noise process that can accumulate over successive correction rounds. Thus, unlike in previously studied noisy GKP scenarios, the code no longer self-corrects. Moreover, repeated noisy GKP teleportation drives the encoded modes out of the logical subspace, progressively degrading the encoded codewords. We show that the resulting leakage rapidly saturates with the number of correction rounds. Finally, we investigate the implications of our results for motional-oscillator-based GKP error-correction platforms.
Bosonic codes provide an alternative option for quantum error correction. An important category of bosonic codes called the Gottesman-Kitaev-Preskill (GKP) code has aroused much interest recently. Theoretically, the error correction ability of the GKP code is limited since it can only correct small shift errors in position and momentum quadratures. A natural approach to promote the GKP error correction for large-scale, fault-tolerant quantum computation is concatenating encoded GKP states with a stabilizer code. The performance of the XZZX surface-GKP code, i.e., the single-mode GKP code concatenated with the XZZX surface code is investigated in this paper under two different noise models. Firstly, in the code-capacity noise model, the asymmetric rectangular GKP code with parameter $\ensuremath{\lambda}$ is introduced. Using the minimum weight perfect matching decoder combined with the continuous-variable GKP information, the optimal threshold of the XZZX-surface GKP code reaches $\ensuremath{\sigma}\ensuremath{\approx}0.67$ when $\ensuremath{\lambda}=2.1$, compared with the threshold $\ensuremath{\sigma}\ensuremath{\approx}0.60$ of the standard surface-GKP code. Secondly, we analyze the shift errors of two-qubit gates in the actual implementation and build the full circuit-level noise model. By setting the appropriate bias parameters, the logical error rate is reduced by several times in some cases. These results indicate the XZZX surface-GKP codes are more suitable for asymmetric concatenation under the general noise models. We also estimate the overhead of the XZZX-surface GKP code which uses about 291 GKP states with the noise parameter 18.5 dB ($\ensuremath{\kappa}/g\ensuremath{\approx}0.71%$) to encode a logical qubit with the error rate $2.53\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}7}$, compared with the qubit-based surface code using 3041 qubits to achieve almost the same logical error rate.