Modeling open quantum systems---quantum systems coupled to a bath---is of value in condensed-matter theory, cavity quantum electrodynamics, nanosciences, and biophysics. The real-time simulation of open quantum systems was advanced significantly by the recent development of chain mapping techniques and the use of matrix product states that exploit the intrinsic entanglement structure in open quantum systems. The computational cost of simulating open quantum systems, however, remains high when the bath is excited to high-lying quantum states. We develop an approach to reduce the computational costs in such cases. The interaction representation for the open quantum system is used to distribute excitations among the bath degrees of freedom so that the occupation of each bath oscillator is ensured to be low. The interaction picture also causes the matrix dimensions to be much smaller in a matrix product state of a chain-mapped open quantum system than in the Schr\"odinger picture. Using the interaction representation accelerates the calculations by one to two orders of magnitude over the existing matrix-product-state method. In the regime of strong system-bath coupling and high temperatures, the speedup can be as large as three orders of magnitude. The approach developed here is especially promising to simulate the dynamics of open quantum systems in high-temperature and strong-coupling regimes.
Modeling open quantum systems---quantum systems coupled to a bath---is of value in condensed-matter theory, cavity quantum electrodynamics, nanosciences, and biophysics. The real-time simulation of open quantum systems was advanced significantly by the recent development of chain mapping techniques and the use of matrix product states that exploit the intrinsic entanglement structure in open quantum systems. The computational cost of simulating open quantum systems, however, remains high when the bath is excited to high-lying quantum states. We develop an approach to reduce the computational costs in such cases. The interaction representation for the open quantum system is used to distribute excitations among the bath degrees of freedom so that the occupation of each bath oscillator is ensured to be low. The interaction picture also causes the matrix dimensions to be much smaller in a matrix product state of a chain-mapped open quantum system than in the Schr"odinger picture. Using the interaction representation accelerates the calculations by one to two orders of magnitude over the existing matrix-product-state method. In the regime of strong system-bath coupling and high temperatures, the speedup can be as large as three orders of magnitude. The approach developed here is especially promising to simulate the dynamics of open quantum systems in high-temperature and strong-coupling regimes.
Modeling open quantum systems -- quantum systems coupled to a bath -- is of value in condensed matter theory, cavity quantum electrodynamics, nanosciences and biophysics. The real-time simulation of open quantum systems was advanced significantly by the recent development of chain mapping techniques and the use of matrix product states that exploit the intrinsic entanglement structure in open quantum systems. The computational cost of simulating open quantum systems, however, remains high when the bath is excited to high-lying quantum states. We develop an approach to reduce the computational costs in such cases. The interaction representation for the open quantum system is used to distribute excitations among the bath degrees of freedom so that the occupation of each bath oscillator is ensured to be low. The interaction picture also causes the matrix dimensions to be much smaller in a matrix product state of a chain-mapped open quantum system than in the Schr\odinger picture. Using the interaction representation accelerates the calculations by 1-2 orders of magnitude over existing matrix-product-state method. In the regime of strong system-bath coupling and high temperatures, the speedup can be as large as 3 orders of magnitude. The approach developed here is especially promising to simulate the dynamics of open quantum systems in the high-temperature and strong-coupling regimes.
It is challenging to simulate open quantum systems that are connected to a reservoir through multiple channels. For example, vibrations may induce fluctuations in both energy gaps and electronic couplings, which represent two independent channels of system-bath couplings. Systems of this kind are ubiquitous in the processes of excited state radiationless decay. Combined with density matrix renormalization group (DMRG) and matrix product states (MPS) methods, we develop an interaction-picture chain mapping strategy for vibrational reservoirs to simulate the dynamics of these open systems, resulting in time-dependent spatially local system-bath couplings in the chain-mapped Hamiltonian. This transformation causes the entanglement generated by the system-bath interactions to be restricted within a narrow frequency window of vibrational modes, enabling efficient DMRG/MPS dynamical simulations. We demonstrate the utility of this approach by simulating singlet fission dynamics using a generalized spin-boson Hamiltonian with both diagonal and off-diagonal system-bath couplings. This approach generalizes an earlier interaction-picture chain mapping scheme, allowing for efficient and exact simulation of systems with multi-channel system-bath couplings using matrix product states, which may further our understanding of nonlocal exciton-phonon couplings in exciton transport and the non-Condon effect in energy and electron transfer.
Experimental advances have made it possible to realize and control quantum many-body systems, allowing the experimental study of non-equilibrium phenomena. Due to the Hilbert space growing exponentially with the number of particles, advanced numerical techniques are usually required to understand many-body effects at the theoretical level. In this thesis, we address the question of how to efficiently simulate the non-equilibrium dynamics of many-body systems using matrix product states (MPS). In particular, we consider quantum systems in interaction with macroscopic environments, as they appear in Anderson impurity problems, quantum thermodynamics, or open quantum systems. We develop a low-entanglement representation of the environment with only short-range interactions, perfectly suitable for simulations with MPS. We further show that an interleaved ordering of tight-binding chains can significantly reduce the creation of entanglement, as opposed to an intuitive implementation of the Hamiltonian's geometry. Our approach allows long-time simulations and an analysis of the environmental dynamics, in which, after a sudden quench, we find clear signatures of many-body effects. We employ our techniques to compute spectral functions of impurity models, with possible applications to dynamical mean-field theory impurity solvers, and to calculate dissipation in the non-equilibrium Anderson model with explicit time-dependence, as relevant for ongoing experiments with oscillating tip atomic force microscopes.
This paper presents an efficient algorithm for the time evolution of open quantum many-body systems using matrix-product states (MPS) proposing a convenient structure of the MPS-architecture, which exploits the initial state of system and reservoir. By doing so, numerically expensive re-ordering protocols are circumvented. It is applicable to systems with a Markovian type of interaction, where only the present state of the reservoir needs to be taken into account. Its adaption to a non-Markovian type of interaction between the many-body system and the reservoir is demonstrated, where the information backflow from the reservoir needs to be included in the computation. Also, the derivation of the basis in the quantum stochastic Schrödinger picture is shown. As a paradigmatic model, the Heisenberg spin chain with nearest-neighbor interaction is used. It is demonstrated that the algorithm allows for the access of large systems sizes. As an example for a non-Markovian type of interaction, the generation of highly unusual steady states in the many-body system with coherent feedback control is demonstrated for a chain length of N=30.
Open quantum systems have drawn attention over decades due to its applicability in the foundation of theoretical physics, e.g. statistical mechanics, quantum mechanics and condensed matter physics. The dynamics of open quantum systems has been described as separate entities from their surrounding environment that consists of a very large number of modes, somehow coupled to the mode of the system. Even though the exact solution of the dynamical behavior of the system is impossible to calculate, we obtain a tentative solution using the crucial Markov approximation. The input-output formalism of the quantum Langevin equation (QLE) has been considered as a useful tool which provides a semi-classical description of the dynamics of the system, whereas the master equation provides a complete picture of the dynamics of the system expressed in terms of density matrix. While studying the dynamics of nonlinear system/environment coupling using QLE, we see, for a small value of external field, that the steady state system field does not change much from the steady state field obtained in the absence of nonlinear dissipation. However, in a case where a stronger external field is applied, we see that the deviation becomes substantial from the solution of linear system. We also see that the nonlinear coupling introduces significant difference in the cavity fluctuation spectrum. The description, therefore, provides a potential explanation of parametric effects in terms of nonlinear dissipation phenomena associated with the nonlinear coupling. Even though the theories developed in the context of open quantum systems have proven to be powerful tools, they do not provide a satisfactory platform to be implemented on non-linear Hamiltonians. We often approximate it by linearizing over nonlinear steady state field amplitude, and therefore, the interesting effects are often overlooked. The limitation of the analytics provokes us to simulate open quantum dynamics numerically. The numerical method consists of transformation of the environmental degrees of freedom to a one-dimensional many-body chain, and the computational technique includes numerical diagonalization and renormalization process. The time-adaptive density matrix renormalisation group (t-DMRG) is known as one of the most powerful techniques for the simulation of strongly-correlated many-body quantum systems. In this thesis, along with the theoretical modeling, we implement DMRG numerical scheme for the simulation of canonical S/B model by mapping it to one-dimensional harmonic chain with nearest neighbor interactions, and use the method to investigate the dynamics of the free dissipative system. The thermalization of open quantum systems is also studied by generating minimally entangled typical thermal states (METTS) through imaginary time evolution, and real-time evolving an empty system in the presence of the thermal bath. Further, we simulate coherently driven free dissipative Kerr nonlinear system numerically using Euler's method by solving Heisenberg equation of motion and t-DMRG algorithm, and demonstrate how the numerical results are analogous to classical bistability. By comparing with analytics, we see that the DMRG numerics is analogous to the quantum-mechanical exact solution obtained by mapping the equation of motion of the density matrix of the system to a Fokker-Plank equation. The comparison between two different numerical techniques shows that the semi-classical Euler's method determines the dynamics of the system field of one among two coherent branches, whereas DMRG numerics gives the superposition of both of them. Hence, DMRG-determined time dynamics undergoes generating non-classical states. Our approach of dealing with nonlinearity represents an important contribution in the developments of technique to study the dynamical and steady-state behavior of open quantum systems, which is a fundamental aspect of quantum physics.
Simulating the non-perturbative and non-Markovian dynamics of open quantum systems is a very challenging many body problem, due to the need to evolve both the system and its environments on an equal footing. Tensor network and matrix product states (MPS) have emerged as powerful tools for open system models, but the numerical resources required to treat finite-temperature environments grow extremely rapidly and limit their applications. In this study we use time-dependent variational evolution of MPS to explore the striking theory of Tamascelli et al. (Phys. Rev. Lett. 2019, 123, 090402.) that shows how finite-temperature open dynamics can be obtained from zero temperature, i.e., pure wave function, simulations. Using this approach, we produce a benchmark dataset for the dynamics of the Ohmic spin-boson model across a wide range of coupling strengths and temperatures, and also present a detailed analysis of the numerical costs of simulating non-equilibrium steady states, such as those emerging from the non-perturbative coupling of a qubit to baths at different temperatures. Despite ever-growing resource requirements, we find that converged non-perturbative results can be obtained, and we discuss a number of recent ideas and numerical techniques that should allow wide application of MPS to complex open quantum systems.