Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2111.10161 · IEEE Transactions on Instrumentation and Measurement

Optically Loaded Strontium Lattice Clock With a Single Multi-Wavelength Reference Cavity

Matteo Barbiero, Davide Calonico, Filippo Levi, Marco G. Tarallo

Published Jan 1, 2022• 15 citations
arXivHTMLPDF

Abstract

We report on the realization of a new compact strontium optical clock using a 2-D magneto-optical-trap (2D-MOT) as cold atomic source and a multi-wavelength cavity as the frequency stabilization system. All needed optical frequencies are stabilized to a zero-thermal expansion high-finesse optical resonator and can be operated without frequency adjustments for weeks. We present the complete characterization of the apparatus. Optical control of the atomic source allows us to perform low-noise clock operation without atomic signal normalization. Long- and short-term stability tests of the clock have been performed for the88Sr bosonic isotope by means of interleaved clock operation. Finally, we present the first preliminary accuracy budget of the system.

DOI
10.1109/tim.2022.3165292

Related papers

INRIM Sr Optical Clock: An Optically Loaded Apparatus for High-Stability Metrology

Matteo Barbiero, Marco G. Tarallo, Federica Rullo +4 more

We report on the development of a new compact strontium optical lattice clock employing a 2D-MOT as cold atomic source. The clock system reliability is currently studied using the most abundant isotope, the bosonic88Sr. More than 10588Sr atoms are loaded in the optical lattice at 813 nm at temperatures of few microKelvin. All the needed optical frequencies are stabilized to a zero-CTE high finesse optical resonator, and can be operated without frequency adjustments for weeks. The system shows the advantage of optical guiding and switching the atomic source to the clock spectroscopy region by demonstrating more than 17 s lifetime. First spectroscopy tests on the clock transition on88Sr atoms has been performed by magnetic-field induced spectroscopy.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Jul 7, 2021•1 citation

A strontium optical lattice clock apparatus for precise frequency metrology and beyond

Marco G. Tarallo, Davide Calonico, Filippo Levi +3 more

We present the advancement toward the realization of a new optical clock apparatus based on ultracold strontium atoms. The atomic source employs a novel design based on two dimensional magneto optical trapping which is advantageous because of the suppression of thermal atoms in the interrogation volume, and the elimination of hot BBR in the view of the science cell. Compact frequency stabilization of cooling and trapping lasers is achieved via single PDH lock to a three-color ultrastable optical resonator. We also study different lattice topologies to operate the ultracold atomic ensemble in the high-cooperativity regime toward sub-quantum projection noise instability and millihertz-linewidth frequency stabilization by cavity QED.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Jul 1, 2017•4 citations

Laser controlled atom source for optical clocks

Ole Kock, Wei Jian He, Dariusz Świerad +4 more

Precision timekeeping has been a driving force in innovation, from defining agricultural seasons to atomic clocks enabling satellite navigation, broadband communication and high-speed trading. We are on the verge of a revolution in atomic timekeeping, where optical clocks promise an over thousand-fold improvement in stability and accuracy. However, complex setups and sensitivity to thermal radiation pose limitations to progress. Here we report on an atom source for a strontium optical lattice clock which circumvents these limitations. We demonstrate fast (sub 100 ms), cold and controlled emission of strontium atomic vapours from bulk strontium oxide irradiated by a simple low power diode laser. Our results demonstrate that millions of strontium atoms from the vapour can be captured in a magneto-optical trap (MOT). Our method enables over an order of magnitude reduction in scale of the apparatus. Future applications range from satellite clocks testing general relativity to portable clocks for inertial navigation systems and relativistic geodesy.

Scientific Reports•Nov 18, 2016•34 citations

Towards miniaturized strontium optical lattice clock

Wei He

Optical atomic clocks with precisions and accuracies in the 10\(^-\)\(^1\)\(^8\) level [1] are now the most advanced man-made timekeeping devices. They outperform the microwave cesium atomic clocks that realize the SI definition of the second. Scaling down the size of optical atomic clocks may open the door to a range of industrial and space applications. In this thesis, the design and preliminary results of a compact strontium cooling system are presented. In the first cooling stage, the high power 461 nm laser with 300 mW output features a modular design, while smaller laser sources for demonstrating a strontium magneto-optical trap have also been investigated. An innovative design that couples a spectroscopy cell directly into the scientific chamber reduces the overall size and power consumption of the system. Additionally, using strontium oxide as a source of strontium atoms suitable for optical clocks has achieved initial success. For the first time, a single-beam MOT configuration is applied to strontium. In this novel apparatus, the blue MOT and red MOT broadband cooling phases are able to trap 5x10\(^6\) and 1000 atoms, respectively. This work shows promising progress towards developing a functional miniaturized strontium optical lattice clock.

•Jul 1, 2017•5 citations

Prospect for a compact strontium optical lattice clock

N. Poli, Robert E. Drullinger, G. Ferrari +4 more

We report on our progress toward the realization of a compact optical frequency standard referenced to strontium intercombination lines. Our current setup allows the production of ultracold Sr atoms in hundreds of ms. For high resolution spectroscopy of the 1S0-3P0 doubly forbidden transition we have prepared a 698 nm clock laser stabilized on a high finesse, symmetrically suspended cavity and a high power 813 nm light source for the optical lattice trap at the magic wavelength. Due to their compactness, reliability, and low power consumption, semiconductor laser sources represent the best choice for the development of compact and transportable devices for application both on Earth and in Space. A new Sr trapping and cooling experimental setup is also presented.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Aug 29, 2007•8 citations

Optical frequency standard with ultra-cold strontium atoms

N. Poli, Robert E. Drullinger, Marco G. Tarallo +2 more

We report on our progress toward the realization of an optical frequency standard referenced to strontium intercombination lines. While first frequency measurement of the weakly allowed 1S 0- 3P 1 transition was done with saturation spectroscopy on a thermal beam, we are preparing the experimental setup for high resolution spectroscopy on ultracold atoms of the doubly forbidden 1S 0- 3P 0 line. Our current setup allows the capture more than 10 7 atoms at 1 μK in 500 ms in two stages of magneto-optical trapping. We also demonstrated the dipole trapping of ultracold strontium isotopes for accurate spectroscopy and collisional measurements. A semiconductor laser source at 698 nm has already been locked to a pre-stabilization cavity obtaining a fast linewidth of less than 1 kHz. Second stage stabilization of the clock laser to ultra-high finesse cavity is in development. Recent measurement of elastic and inelastic cross-sections of the two most abundant 88Sr and 86Sr isotopes are also presented.

•Jan 1, 2006•2 citations
We report on the realization of a new compact strontium optical clock using a 2-D magneto-optical-trap (2D-MOT) as cold atomic source and a multi-wavelength cavity as the frequency stabilization system. All needed optical frequencies are stabilized to a zero-thermal expansion high-finesse optical resonator and can be operated without frequency adjustments for weeks. We present the complete characterization of the apparatus. Optical control of the atomic source allows us to perform low-noise clock operation without atomic signal normalization. Long- and short-term stability tests of the clock have been performed for the88Sr bosonic isotope by means of interleaved clock operation. Finally, we present the first preliminary accuracy budget of the system.
We report on the development of a new compact strontium optical lattice clock employing a 2D-MOT as cold atomic source. The clock system reliability is currently studied using the most abundant isotope, the bosonic88Sr. More than 10588Sr atoms are loaded in the optical lattice at 813 nm at temperatures of few microKelvin. All the needed optical frequencies are stabilized to a zero-CTE high finesse optical resonator, and can be operated without frequency adjustments for weeks. The system shows the advantage of optical guiding and switching the atomic source to the clock spectroscopy region by demonstrating more than 17 s lifetime. First spectroscopy tests on the clock transition on88Sr atoms has been performed by magnetic-field induced spectroscopy.
We present the advancement toward the realization of a new optical clock apparatus based on ultracold strontium atoms. The atomic source employs a novel design based on two dimensional magneto optical trapping which is advantageous because of the suppression of thermal atoms in the interrogation volume, and the elimination of hot BBR in the view of the science cell. Compact frequency stabilization of cooling and trapping lasers is achieved via single PDH lock to a three-color ultrastable optical resonator. We also study different lattice topologies to operate the ultracold atomic ensemble in the high-cooperativity regime toward sub-quantum projection noise instability and millihertz-linewidth frequency stabilization by cavity QED.
Precision timekeeping has been a driving force in innovation, from defining agricultural seasons to atomic clocks enabling satellite navigation, broadband communication and high-speed trading. We are on the verge of a revolution in atomic timekeeping, where optical clocks promise an over thousand-fold improvement in stability and accuracy. However, complex setups and sensitivity to thermal radiation pose limitations to progress. Here we report on an atom source for a strontium optical lattice clock which circumvents these limitations. We demonstrate fast (sub 100 ms), cold and controlled emission of strontium atomic vapours from bulk strontium oxide irradiated by a simple low power diode laser. Our results demonstrate that millions of strontium atoms from the vapour can be captured in a magneto-optical trap (MOT). Our method enables over an order of magnitude reduction in scale of the apparatus. Future applications range from satellite clocks testing general relativity to portable clocks for inertial navigation systems and relativistic geodesy.
Optical atomic clocks with precisions and accuracies in the 10−^-−1^118^88 level [1] are now the most advanced man-made timekeeping devices. They outperform the microwave cesium atomic clocks that realize the SI definition of the second. Scaling down the size of optical atomic clocks may open the door to a range of industrial and space applications. In this thesis, the design and preliminary results of a compact strontium cooling system are presented. In the first cooling stage, the high power 461 nm laser with 300 mW output features a modular design, while smaller laser sources for demonstrating a strontium magneto-optical trap have also been investigated. An innovative design that couples a spectroscopy cell directly into the scientific chamber reduces the overall size and power consumption of the system. Additionally, using strontium oxide as a source of strontium atoms suitable for optical clocks has achieved initial success. For the first time, a single-beam MOT configuration is applied to strontium. In this novel apparatus, the blue MOT and red MOT broadband cooling phases are able to trap 5x106^66 and 1000 atoms, respectively. This work shows promising progress towards developing a functional miniaturized strontium optical lattice clock.
We report on our progress toward the realization of a compact optical frequency standard referenced to strontium intercombination lines. Our current setup allows the production of ultracold Sr atoms in hundreds of ms. For high resolution spectroscopy of the 1S0-3P0 doubly forbidden transition we have prepared a 698 nm clock laser stabilized on a high finesse, symmetrically suspended cavity and a high power 813 nm light source for the optical lattice trap at the magic wavelength. Due to their compactness, reliability, and low power consumption, semiconductor laser sources represent the best choice for the development of compact and transportable devices for application both on Earth and in Space. A new Sr trapping and cooling experimental setup is also presented.
We report on our progress toward the realization of an optical frequency standard referenced to strontium intercombination lines. While first frequency measurement of the weakly allowed 1S 0- 3P 1 transition was done with saturation spectroscopy on a thermal beam, we are preparing the experimental setup for high resolution spectroscopy on ultracold atoms of the doubly forbidden 1S 0- 3P 0 line. Our current setup allows the capture more than 10 7 atoms at 1 μK in 500 ms in two stages of magneto-optical trapping. We also demonstrated the dipole trapping of ultracold strontium isotopes for accurate spectroscopy and collisional measurements. A semiconductor laser source at 698 nm has already been locked to a pre-stabilization cavity obtaining a fast linewidth of less than 1 kHz. Second stage stabilization of the clock laser to ultra-high finesse cavity is in development. Recent measurement of elastic and inelastic cross-sections of the two most abundant 88Sr and 86Sr isotopes are also presented.