We present an error mitigation scheme which corrects readout errors on Noisy Intermediate-Scale Quantum (NISQ) computers [1,2]. After a short review of applying the method to one qubit, we proceed to discuss the case when correlations between different qubits occur. We demonstrate how the readout error can be mitigated in this case. By performing experiments on IBMQ hardware, we show that such correlations do not have a strong effect on the results, justifying to neglect them.
We present an error mitigation scheme which corrects readout errors on Noisy Intermediate-Scale Quantum (NISQ) computers [1,2]. After a short review of applying the method to one qubit, we proceed to discuss the case when correlations between different qubits occur. We demonstrate how the readout error can be mitigated in this case. By performing experiments on IBMQ hardware, we show that such correlations do not have a strong effect on the results, justifying to neglect them.
Readout errors are among the most dominant errors on current noisy intermediate-scale quantum devices. Recently, an efficient and scaleable method for mitigating such errors has been developed, based on classical bit-flip correction. In this talk, we compare the performance of this method for IBM's and Rigetti's quantum devices, demonstrating how the method improves the noisy measurements of observables obtained on the quantum hardware. Moreover, we examine the variance amplification to the data after applying of our mitigation procedure, which is common to all mitigation strategies. We derive a new expression for the variance of the mitigated Pauli operators in terms of the corrected expectation values and the noisy variances. Our hardware results show good agreement with the theoretical prediction, and we demonstrate that the increase of the variance due to the mitigation procedure is only moderate.
Quantum computing is entering a transitional regime between noisy intermediate-scale quantum (NISQ) processing and early fault-tolerant quantum computation (FTQC), in which increasingly capable hardware is beginning to support repeated syndrome measurements, partial error correction, and logical-qubit operations, while residual physical and logical errors remain non-negligible. In this regime, error suppression, error mitigation, and quantum error correction are increasingly better viewed as complementary layers of a unified error-reduction strategy rather than as separate approaches, with each acting at a different stage of the quantum computation to improve simulation reliability. Thus, in this review, we provide a practical and forward-looking overview of the principal hardware error sources and the corresponding error suppression and mitigation methods for reducing their impact across the current NISQ-FTQC transition. We discuss hardware-aware circuit design, coherent-error suppression, readout mitigation, noise extrapolation, classical inference, and software-supported workflows, with particular emphasis on their implementation on actual quantum processors. We further examine how error mitigation techniques can be adapted to encoded and logical-qubit settings so that they can operate alongside quantum error correction to suppress residual logical errors and improve the accuracy of computation in the early fault-tolerant regime.
We develop a classical bit-flip correction method to mitigate measurement errors on quantum computers. This method can be applied to any operator, any number of qubits, and any realistic bit-flip probability. We first demonstrate the successful performance of this method by correcting the noisy measurements of the ground-state energy of the longitudinal Ising model. We then generalize our results to arbitrary operators and test our method both numerically and experimentally on IBM quantum hardware. As a result, our correction method reduces the measurement error on the quantum hardware by up to one order of magnitude. We finally discuss how to preprocess the method and extend it to other error sources beyond measurement errors. For local Hamiltonians, the overhead costs are polynomial in the number of qubits, even if multiqubit correlations are included.
Readout errors are among the most dominant errors on current noisy intermediate-scale quantum devices. Recently, an efficient and scaleable method for mitigating such errors has been developed, based on classical bit-flip correction. In this talk, we compare the performance of this method for IBM's and Rigetti's quantum devices, demonstrating how the method improves the noisy measurements of observables obtained on the quantum hardware. Moreover, we examine the variance amplification to the data after applying of our mitigation procedure, which is common to all mitigation strategies. We derive a new expression for the variance of the mitigated Pauli operators in terms of the corrected expectation values and the noisy variances.Our hardware results show good agreement with the theoretical prediction, and we demonstrate that the increase of the variance due to the mitigation procedure is only moderate.
Quantum systems operate using quantum bits (qubits), which are highly sensitive to external noises and disturbances and they are easily prone to errors. In the Noisy Intermediate-Scale Quantum (NISQ) era, these errors make difficult to build reliable, fault tolerant quantum circuits for real world deployment. This work provides an overview of need for Quantum Error Correction (QEC) in NISQ devices, as qubits commonly get affected by bit-flip, phase-flip, and combined errors that degrades system performance and examines Quantum Error Correction Code (QECC) techniques usage in communication, computation, and quantum multimedia applications such as image and video transmission. In addition, a simple three-qubit repetition circuit is introduced to demonstrate an error-mitigation approach. These findings, also show how QEC improves fidelity, reduces logical errors, and improves noise tolerance. The analysis also identifies challenges and outlines the future research direction aimed at achieving efficient and scalable fault tolerant quantum circuits.
Quantum systems operate using quantum bits (qubits), which are highly sensitive to external noises and disturbances and they are easily prone to errors. In the Noisy Intermediate-Scale Quantum (NISQ) era, these errors make difficult to build reliable, fault tolerant quantum circuits for real world deployment. This work provides an overview of need for Quantum Error Correction (QEC) in NISQ devices, as qubits commonly get affected by bit-flip, phase-flip, and combined errors that degrades system performance and examines Quantum Error Correction Code (QECC) techniques usage in communication, computation, and quantum multimedia applications such as image and video transmission. In addition, a simple three-qubit repetition circuit is introduced to demonstrate an error-mitigation approach. These findings, also show how QEC improves fidelity, reduces logical errors, and improves noise tolerance. The analysis also identifies challenges and outlines the future research direction aimed at achieving efficient and scalable fault tolerant quantum circuits.