Quantum computers are devices, which allow more efficient solutions of problems as compared to their classical counterparts.As the timeline to developing a quantum-error corrected computer is unclear, the quantum computing community has dedicated much attention to developing algorithms for currently available noisy intermediate-scale quantum computers (NISQ).Thus far, within NISQ, optimization problems are one of the most commonly studied and are quite often tackled with the quantum approximate optimization algorithm (QAOA).This algorithm is best known for computing graph partitions with a maximal separation of edges (MaxCut), but can easily calculate other problems related to graphs.Here, I present a novel quantum optimization algorithm, which uses exponentially less qubits as compared to the QAOA while requiring a significantly reduced number of quantum operations to solve the MaxCut problem.Such an improved performance allowed me to partition graphs with 32 nodes on publicly available 5 qubit gate-based quantum computers without any preprocessing such as division of the graph into smaller subgraphs.These results represent a 40% increase in graph size as compared to state-of-art experiments on gate-based quantum computers such as Google Sycamore.The obtained lower bound is 54.9% on the solution for actual hardware benchmarks and 77.6% on ideal simulators of quantum computers.Furthermore, large-scale optimization problems represented by graphs of a 128 nodes are tackled with simulators of quantum computers, again without any predivision into smaller subproblems and a lower solution bound of 67.9% is achieved.The study presented here paves way to using powerful genetic optimizer in synergy with quantum computers.
Quantum computers are devices, which allow more efficient solutions of problems as compared to their classical counterparts.As the timeline to developing a quantum-error corrected computer is unclear, the quantum computing community has dedicated much attention to developing algorithms for currently available noisy intermediate-scale quantum computers (NISQ).Thus far, within NISQ, optimization problems are one of the most commonly studied and are quite often tackled with the quantum approximate optimization algorithm (QAOA).This algorithm is best known for computing graph partitions with a maximal separation of edges (MaxCut), but can easily calculate other problems related to graphs.Here, I present a novel quantum optimization algorithm, which uses exponentially less qubits as compared to the QAOA while requiring a significantly reduced number of quantum operations to solve the MaxCut problem.Such an improved performance allowed me to partition graphs with 32 nodes on publicly available 5 qubit gate-based quantum computers without any preprocessing such as division of the graph into smaller subgraphs.These results represent a 40% increase in graph size as compared to state-of-art experiments on gate-based quantum computers such as Google Sycamore.The obtained lower bound is 54.9% on the solution for actual hardware benchmarks and 77.6% on ideal simulators of quantum computers.Furthermore, large-scale optimization problems represented by graphs of a 128 nodes are tackled with simulators of quantum computers, again without any predivision into smaller subproblems and a lower solution bound of 67.9% is achieved.The study presented here paves way to using powerful genetic optimizer in synergy with quantum computers.
Quantum computers are devices which allow the solution of problems unsolvable to their classical counterparts. As an error-corrected quantum computer is still a decade away the quantum computing community has dedicated much attention to developing algorithms for currently available Noisy Intermediate-Scale Quantum computers (NISQ). Thus far, within NISQ, optimization problems are one of the most commonly studied and are exclusively tackled with the Quantum Approximate Optimization Algorithm (QAOA). This algorithm predominantly computes graph partitions with a maximal separation of edges (MaxCut), but can also be modified to calculate other properties of graphs. Here, I present a novel quantum optimization algorithm which uses exponentially less qubits as compared to the QAOA while requiring a significantly reduced number of quantum operations to solve the MaxCut problem. Such an improved performance allowed me to partition a graphs 32 nodes on publicly available 5 qubit gate-based solid state quantum devices without any preprocessing such as division of the graph into smaller subgraphs. This results represent a 40% increase in graph size as compared to state-of-art experiments on solid state devices such as Google Sycamore. The obtained lower bound is 54.9% on the solution for actual hardware benchmarks and 77.6% on ideal quantum simulators. Furthermore, large-scale optimization problems represented by graphs of a 128 nodes are tackled with quantum simulators, again without any pre-division into smaller subproblems and a lower solution bound of 67.9% is achieved.
Abstract MaxCut is a key NP-hard combinatorial optimization problem. Quantum computing offers methods to solve such problems potentially better than classical counterparts, with the Quantum Approximate Optimization Algorithm (QAOA) being a state-of-the-art example. However, the performance of quantum methods is currently hindered by hardware noise and limited qubit volumes. We present a variational Qubit-Efficient MaxCut (QEMC) algorithm that requires only O(logN) O ( log N ) qubits to tackle graphs of size N , an exponential reduction compared to QAOA. We demonstrate cutting-edge performance for 32-node graph instances (5 qubits) on real superconducting hardware, and for graphs with up to 2048 nodes (11 qubits) via classical simulations. The QEMC algorithm is based on an innovative encoding scheme, with potentially broad applicability, that empowers it with strong noise resilience, but also enables its efficient classical simulation. As such, the QEMC algorithm provides a challenging benchmark for QAOA on noisy devices and offers a novel quantum-inspired approach.
NP-hard problems are not believed to be exactly solvable through general polynomial time algorithms. Hybrid quantum-classical algorithms to address such combinatorial problems have been of great interest in the past few years. Such algorithms are heuristic in nature and aim to obtain an approximate solution. Significant improvements in computational time and/or the ability to treat large problems are some of the principal promises of quantum computing in this regard. The hardware, however, is still in its infancy and the current noisy intermediate-scale quantum (NISQ) computers are not able to optimize industrially relevant problems. Moreover, the storage of qubits and introduction of entanglement require extreme physical conditions. An issue with quantum optimization algorithms such as the quantum approximate optimization algorithm is that they scale linearly with problem size. In this paper, we build upon a proprietary methodology which scales logarithmically with problem size---opening an avenue for treating optimization problems of unprecedented scale on gate-based quantum computers. To test the performance of the algorithm, we first find a way to apply it to a handful of NP-hard problems: Maximum Cut, Minimum Partition, Maximum Clique, Maximum Weighted Independent Set. Subsequently, these algorithms are tested on a quantum simulator with graph sizes of over a hundred nodes and on a real quantum computer up to graph sizes of 256. To our knowledge, these constitute the largest realistic combinatorial optimization problems ever run on a NISQ device, overcoming previous problem sizes by almost tenfold.
Abstract In the noisy intermediate-scale quantum (NISQ) era, quantum approximate optimisation algorithms are important tools for solving NP-hard problems such as combinatorial optimisation. However, most QAOA implementations ignore the inherent noise in quantum circuit environments. This study proposes a noisy quantum approximate optimisation algorithm (NQAOA) and analyses its performance under noisy conditions through numerical simulations. We compare the approximate ratios (AR) of various graphs under different optimisation strategies and noise conditions, and assess the impact of circuit depth, node count, edge count, and noise coefficient on the maximum cut (MaxCut). Experimental results show that noise leads to overfitting, and the approximate ratio ( AR ) exhibits fluctuating changes as the edge count e increases. The AR values under ideal conditions and the expected results are both superior to those under noisy conditions. This study is the first to systematically integrate multiple types of quantum noise into the QAOA framework, quantitatively analysing the synergistic effects of noise type, optimiser performance, and graph structure. Through theoretical derivations and numerical simulations, we established linear/exponential theoretical boundaries for AR decay related to noise coefficients, providing a critical reference for designing noise-resistant quantum optimisation algorithms on NISQ devices.
Quantum approximate optimization algorithm (QAOA) is a promising hybrid quantum-classical algorithm for solving combinatorial optimization problems. However, it cannot overcome qubit limitation for large-scale problems. Furthermore, the simulation time of QAOA scales poorly with the problem size. We propose a divide-and-conquer QAOA (DC-QAOA) to address the above challenges for graph maximum cut (MaxCut) problem. The algorithm works by recursively partitioning a larger graph into smaller ones whose MaxCut solutions are obtained with small-size noisy intermediate-scale quantum computers. The overall solution is retrieved from the subsolutions by applying the combination policy of measurement distribution reconstruction (MDR). The solution quality depends on the graph partitioning algorithm and MDR policy. Multiple partitioning and reconstruction methods are proposed and compared. Results are evaluated by metrics, such as quantum program runtime, measurement expectation value (EV), and approximation ratio (AR). The results show that DC-QAOA achieves 97.14% AR (20.32% higher than classical counterpart), and 94.79% EV (15.80% higher than quantum annealing). DC-QAOA solves large-scale graph instances with a polynomial rate or returns unsuccessful partition if graph connectivity requirement is not fulfilled otherwise.
The max-cut problem (MCP) is a classic problem in the field of combinatorial optimization and has important applications in various fields, including statistical physics and image processing. However, except for some special cases, the MCP still encounters a non-deterministic polynomial complete problem (an NP-complete problem), and there is currently no known efficient classical algorithm that can solve it in polynomial time. The quantum approximate optimization algorithm (QAOA), as a pivotal algorithm in the noisy intermediate-scale quantum (NISQ) computing era, has shown significant potential for solving the MCP. However, due to the lack of quantum error correction, the reliability of computations in NISQ systems sharply declines as the circuit depth of the algorithm increases. Therefore, designing an efficient, shallow-depth, and low-complexity QAOA for the MCP is a critical challenge in demonstrating the advantages of quantum computing in the NISQ era.In this paper, according to the standard QAOA algorithm, we introduce Pauli Y rotation gates into the target Hamiltonian circuit for the MCP. By enhancing the flexibility of quantum trial functions and improving the efficiency of Hilbert space exploration within a single iteration, we significantly improve the performance of QAOA on the MCP.We conduct extensive numerical simulations using the MindSpore quantum platform, and compare the proposed RY-layer-assisted QAOA with standard QAOA and its existing variants, including MA-QAOA and QAOA+. The experiments are performed on various graph types, including complete graphs, 3-regular graphs, 4-regular graphs, and random graphs with edge probabilities between 0.3 and 0.5. Our results show that the RY-layer-assisted QAOA achieves higher approximation ratios in all graph types, particularly in regular and random graphs, where traditional QAOA variants are difficult to implement. Moreover, the proposed method exhibits strong robustness as the graph size increases, and can maintain high performance even for larger graphs. Importantly, the RY-layer-assisted QAOA requires fewer CNOT gates and has a lower circuit depth than the standard QAOA and its variants, making it more suitable for NISQ devices with limited coherence times and high error rates.In conclusion, the RY-layer-assisted QAOA provides a promising approach for solving MCP in the NISQ era. By improving the approximation ratio while reducing circuit complexity, this method demonstrates significant potential for practical quantum computing applications, thus paving the way for developing more efficient and reliable quantum optimization algorithms.