Quantum computing has become a promising computing approach because of its capability to solve certain problems, exponentially faster than classical computers. A n -qubit quantum system is capable of providing 2 n computational space to a quantum algorithm. However, quantum computers are prone to errors. Quantum circuits that can reliably run on today’s Noisy Intermediate-Scale Quantum (NISQ) devices are not only limited by their qubit counts but also by their noisy gate operations. In this article, we have introduced i -QER, a scalable machine learning-based approach to evaluate errors in a quantum circuit and reduce these without using any additional quantum resources. The i -QER predicts possible errors in a given quantum circuit using supervised learning models. If the predicted error is above a pre-specified threshold, it cuts the large quantum circuit into two smaller sub-circuits using an error-influenced fragmentation strategy for the first time to the best of our knowledge. The proposed fragmentation process is iterated until the predicted error reaches below the threshold for each sub-circuit. The sub-circuits are then executed on a quantum device. Classical reconstruction of the outputs obtained from the sub-circuits can generate the output of the complete circuit. Thus, i -QER also provides classical control over a scalable hybrid computing approach, which is a combination of quantum and classical computers. The i -QER tool is available at https://github.com/SaikatBasu90/i-QER .
Quantum computing has become a promising computing approach because of its capability to solve certain problems, exponentially faster than classical computers. A n -qubit quantum system is capable of providing 2 n computational space to a quantum algorithm. However, quantum computers are prone to errors. Quantum circuits that can reliably run on today’s Noisy Intermediate-Scale Quantum (NISQ) devices are not only limited by their qubit counts but also by their noisy gate operations. In this article, we have introduced i -QER, a scalable machine learning-based approach to evaluate errors in a quantum circuit and reduce these without using any additional quantum resources. The i -QER predicts possible errors in a given quantum circuit using supervised learning models. If the predicted error is above a pre-specified threshold, it cuts the large quantum circuit into two smaller sub-circuits using an error-influenced fragmentation strategy for the first time to the best of our knowledge. The proposed fragmentation process is iterated until the predicted error reaches below the threshold for each sub-circuit. The sub-circuits are then executed on a quantum device. Classical reconstruction of the outputs obtained from the sub-circuits can generate the output of the complete circuit. Thus, i -QER also provides classical control over a scalable hybrid computing approach, which is a combination of quantum and classical computers. The i -QER tool is available at https://github.com/SaikatBasu90/i-QER .
Hybridizing machine learning (ML) with quantum computing has become an attractive strategy to increase computational power on Noisy Intermediate Scale Quantum (NISQ) devices. Although these can be potentially quantum advantage devices, their qubit numbers and noise are bounded and there are challenges when it comes to practical quantum circuit realization. This work concentrates on the creation of optimized quantum circuits via ML-based strategies, to enhance the performance of the circuits, to reduce the error rate and to accommodate the particular noise profile of the hardware of NISQ devices. The resulting suboptimal mappings with little or no consideration of noise and hardware topology in traditional quantum compilers can ruin the fidelity of quantum algorithm. Leveraging machine learning, and specifically reinforcement and supervised learning methods, our method learns to optimize compilation strategy for specific quantum hardware architecture. The paper proposes a framework that uses machine learning models to predict qubit mappings, gate decompositions, and transpilation paths that minimize gate depth and error accumulation. We also investigate transfer learning methods for propagating the learned compilation strategies to novel NISQ machines. Such methods are empirically validated on both simulated and real quantum hardware backends, providing evidence of circuit depth, execution time and error reductions. The results show that ML-assisted compilation can achieve better success probabilities for benchmark quantum algorithms like VQE and QAOA than conventional compilers. Furthermore, the work examines the interpretability of ML models providing hardware-aware optimization recommendations and understanding the noise patterns and methods of error correction. Our work highlights the key role of ML for transferring between theoretical quantum algorithms and their practical NISQ implementations. This integration boosts the immediate applicability of existing quantum devices and provides a basis for adaptive and scalable likelihood-based compilation for the era of fault-tolerant quantum computation. Our results motivate further investigation of hybrid classical-quantum workflows, in which ML iteratively improves compilation in accordance with changing hardware noise and capabilities. By improving quantum circuit compilation onNISQ computers, this work is taking steps toward the realization of quantum advantage in application scenarios such as optimization, cryptography, and quantum simulation without needing to wait for fully fault-tolerant large-scale quantum computers.
Quantum computing (QC) is a new paradigm offering the potential of exponential speedups over classical computing for certain computational problems. Each additional qubit doubles the size of the computational state space available to a QC algorithm. This exponential scaling underlies QC’s power, but today’s Noisy Intermediate-Scale Quantum (NISQ) devices face significant engineering challenges in scalability. The set of quantum circuits that can be reliably run on NISQ devices is limited by their noisy operations and low qubit counts. This paper introduces CutQC, a scalable hybrid computing approach that combines classical computers and quantum computers to enable evaluation of quantum circuits that cannot be run on classical or quantum computers alone. CutQC cuts large quantum circuits into smaller subcircuits, allowing them to be executed on smaller quantum devices. Classical postprocessing can then reconstruct the output of the original circuit. This approach offers significant runtime speedup compared with the only viable current alternative—purely classical simulations—and demonstrates evaluation of quantum circuits that are larger than the limit of QC or classical simulation. Furthermore, in real-system runs, CutQC achieves much higher quantum circuit evaluation fidelity using small prototype quantum computers than the state-of-the-art large NISQ devices achieve. Overall, this hybrid approach allows users to leverage classical and quantum computing resources to evaluate quantum programs far beyond the reach of either one alone.
The rapid advancement in Quantum Computing, particularly through Noisy-Intermediate Scale Quantum (NISQ) devices, has spurred significant interest in Quantum Machine Learning (QML) applications. Despite their potential, fully-quantum algorithms remain impractical due to the limitations of current NISQ devices. Hybrid quantum-classical neural networks (HQNNs) have emerged as a viable alternative, leveraging both quantum and classical computations to enhance machine learning capabilities. However, the constrained resources of NISQ devices, particularly the limited number of qubits, pose significant challenges for executing large-scale quantum circuits. This work addresses these current challenges by proposing a novel and practical methodology for quantum circuit cutting of HQNNs, allowing large quantum circuits to be executed on limited-qubit NISQ devices. Our approach not only preserves the accuracy of the original circuits but also supports the training of quantum parameters across all subcircuits, which is crucial for the learning process in HQNNs. We propose a cutting methodology for HQNNs that employs a greedy algorithm for identifying efficient cutting points, and the implementation of trainable subcircuits, all designed to maximize the utility of NISQ devices in HQNNs. The findings suggest that quantum circuit cutting is a promising technique for advancing QML on current quantum hardware, since the cut circuit achieves comparable accuracy and much lower qubit requirements than the original circuit. The code is available at https://github.com/eBrain4Everyone/QNN-Cutting.
Quantum computing is a quickly growing field with great potential for future technology. Quantum computers in the current noisy intermediate-scale quantum (NISQ) era face two major limitations - qubit count and error vulnerability. Although quantum error correction (QEC) methods exist, they are not applicable to the current size of computers, requiring thousands of qubits, while current NISQ systems have hundreds at most. It is therefore imperative to improve the reliability of the circuits as much as possible to make them robust to the errors that will occur. One common approach is to adjust the compilation process of a circuit to create a final circuit with improved reliability. However, there are many decisions to be made when compiling that affect the final performance of the circuit, two of the most critical ones being the mapping of logical to physical qubits (the qubit allocation problem) and the movement of qubits to satisfy two-qubit gate adjacency requirements (the qubit routing problem). We focus on solving the qubit allocation problem and identifying initial layouts that reduce error. To identify these layouts, we combine reinforcement learning with a graph neural network (GNN)-based Q-network for analyzing both the connections and error rates of the graph-like backend of superconducting quantum computers to make mapping decisions, creating a Graph Neural Network Assisted Compilation (GNAQC) strategy. We provide both the circuit and the properties of the target backend as input to guide the decision-making process. We work with the IBM Qiskit API to compile and simulate our quantum circuits. We train the architecture using a set of four backends and six circuits and find that GNAQC generally outperforms pre-existing qubit allocation algorithms, increasing final relative output fidelity by roughly 12.7%.
Abstract Quantum computing has recently emerged as a novel paradigm for solving problems otherwise intractable on classical computers, yet the practical progress of quantum computers is severely impacted by noise, decoherence, and imperfect gate operations in Noisy Intermediate-Scale Quantum (NISQ) devices. Specific to IBM Quantum hardware, imperfections due to readout error, gate errors, and device drift, which depends on time, resolves limits for the accuracy of outputs from our algorithms. The mitigation strategies currently used, for example, Measurement Error Mitigation (MEM), Zero Noise Extrapolation (ZNE), and Clifford Data Regression (CDR), offer improvement over raw, unmitigated outputs, but they are static and not dynamic; the reduction of noise in within an NISQ device is temporal and can vary in patterns that are non-zero. In addition to this, using the conventional methods provides inconsistent and suboptimal results.This study will provide enhanced reliability with respect to performing quantum computation on IBM Quantum hardware with a unique mitigation framework that is adaptive and computationally efficient for a high-fidelity output. The problem taken on here is the failure of existing error mitigation strategies to provide adaptive noise compensation, as they assume a statically-distributed error, despite the performance-related characteristics already being documented in regards to calibration drift and variation over time.To achieve this, we propose a Hybrid Adaptive Error Mitigation (HAEM) approach that includes baseline measurement error mitigation and an additional correction layer that utilizes realtime calibration information, along with lightweight machine learning models. The approach can be broken down into three steps: (i) perform standard measurement error mitigation to reduce classical readout noise, (ii) execute compact calibration circuits, such as Bell states, GHZ states and Clifford benchmarks to capture then current error profile of the device, and (iii) use a lightweight machine learning model (having been trained on historical and newest calibration data) to dynamically change the mitigation weights applied for the target quantum algorithm. All implementation is done using Qiskit Runtime to ensure low-latency execution, and we completed experiments on both Qiskit Aer noisy simulators and IBM Quantum devices.Initial results suggest HAEM improved the outputs of quantum algorithms' fidelity compared to the unmitigated runs and the baseline measurement error mitigation (MEM) runs. On the noisy simulators, HAEM increased fidelity from a raw performance of 0.65 to 0.87, nearly a 34% improvement. In fairer hardware-like scenarios, fidelity-on-average was persistently 12% better than MEM, with nearly equal time duration for the additional adaptive measurements. The adaptive aspect of HAEM consistently supported subsequent calibration cycles of the device and was effective to continue providing fidelity improvements despite the static mitigation performance degrading.To sum up, the proposed HAEM framework is a modern and viable alternative for error mitigation which brings together the benefits of baseline approaches with corrections that are driven by fixed-function error-corrective, adaptive learning. As both learning-based and standard baseline approaches can only achieve fixed levels of performance, HAEM, through its use of noise mitigation both at execution time and through correlating it with standard data, provides a route towards reliable quantum computations on current IBM hardware. HAEM also presents a contribution to the NISQ error-resilient landscape, and however it is intended that it will continue to improve future applications of hybrid workflows of quantum and classical computation where error mitigation and resilience is important.
Quantum computing has emerged as a transformative paradigm capable of addressing computational challenges beyond the reach of classical systems.In the current era of Noisy Intermediate-Scale Quantum (NISQ) devices, practical quantum hardware is characterized by limited qubit counts, short coherence times, gate errors, and the absence of full error correction.Despite these constraints, significant progress has been made in developing quantum machine learning (QML) techniques tailored to operate on near-term quantum processors.This paper presents a comprehensive review of Quantum Machine Learning in the context of NISQ computing.We first outline the fundamental principles of quantum computing, including qubits, superposition, entanglement, and quantum parallelism, followed by a detailed discussion of the NISQ computing model and its hardware limitations.The review then examines hybrid quantum-classical learning frameworks, variational quantum algorithms, quantum data encoding strategies, and noise mitigation techniques that enable practical implementation on existing platforms.Emerging applications across healthcare, finance, cybersecurity, climate modeling, and materials science are also surveyed to highlight the real-world potential of QML.Furthermore, key challenges such as scalability, trainability issues, and algorithmic robustness are analyzed, along with current research efforts aimed at overcoming these barriers.The paper concludes by identifying promising future directions for advancing QML toward quantum advantage.This review aims to provide researchers and practitioners with a structured understanding of the capabilities, limitations, and opportunities of quantum machine learning in the NISQ era .