Cross-platform comparison of arbitrary quantum states
Daiwei Zhu, Ze-Pei Cian, Crystal Noel, Andrew Risinger, Debopriyo Biswas, Laird Egan, Yingyue Zhu, Alaina Green, C. Huerta Alderete, Nhung H. Nguyen, Qingfeng Wang, Andrii Maksymov, Yunseong Nam, Marko Cetina, Norbert M. Linke, Mohammad Hafezi, Christopher R. Monroe
As we approach the era of quantum advantage, when quantum computers (QCs) can outperform any classical computer on particular tasks, there remains the difficult challenge of how to validate their performance. While algorithmic success can be easily verified in some instances such as number factoring or oracular algorithms, these approaches only provide pass/fail information of executing specific tasks for a single QC. On the other hand, a comparison between different QCs preparing nominally the same arbitrary circuit provides an insight for generic validation: a quantum computation is only as valid as the agreement between the results produced on different QCs. Such an approach is also at the heart of evaluating metrological standards such as disparate atomic clocks. In this paper, we report a cross-platform QC comparison using randomized and correlated measurements that results in a wealth of information on the QC systems. We execute several quantum circuits on widely different physical QC platforms and analyze the cross-platform state fidelities.
As we approach the era of quantum advantage, when quantum computers (QCs) can outperform any classical computer on particular tasks, there remains the difficult challenge of how to validate their performance. While algorithmic success can be easily verified in some instances such as number factoring or oracular algorithms, these approaches only provide pass/fail information of executing specific tasks for a single QC. On the other hand, a comparison between different QCs preparing nominally the same arbitrary circuit provides an insight for generic validation: a quantum computation is only as valid as the agreement between the results produced on different QCs. Such an approach is also at the heart of evaluating metrological standards such as disparate atomic clocks. In this paper, we report a cross-platform QC comparison using randomized and correlated measurements that results in a wealth of information on the QC systems. We execute several quantum circuits on widely different physical QC platforms and analyze the cross-platform state fidelities.
Abstract In this work, we present a protocol for comparing the performance of arbitrary quantum processes executed on spatially or temporally disparate quantum platforms using Local Operations and Classical Communication (LOCC). The protocol involves sampling local unitary operators, which are then communicated to each platform via classical communication to construct quantum state preparation and measurement circuits. Subsequently, the local unitary operators are implemented on each platform, resulting in the generation of probability distributions of measurement outcomes. The max process fidelity is estimated from the probability distributions, which ultimately quantifies the relative performance of the quantum processes. Furthermore, we demonstrate that this protocol can be adapted for quantum process tomography. We apply the protocol to compare the performance of five quantum devices from IBM and the “Qianshi" quantum computer from Baidu via the cloud. The experimental results unveil two notable aspects: Firstly, the protocol adeptly compares the performance of the quantum processes implemented on different quantum computers. Secondly, the protocol scales, although still exponentially, much more favorably with the number of qubits, when compared to the full quantum process tomography. We view our work as a catalyst for collaborative efforts in cross-platform comparison of quantum computers.
The fragmented landscape of quantum computer benchmarks, characterized by system-specific tools and inconsistent evaluation methodologies, hinders reliable cross-platform performance assessment. We introduce Metriq, an open-source collaborative platform for reproducible cross-platform quantum benchmarking that integrates benchmark definition and execution, data collection, and public presentation into a unified workflow. The Metriq benchmark suite spans both system-level metrics that characterize fundamental device properties such as entanglement quality, gate performance, and circuit speed, as well as application-inspired protocols that assess performance on quantum machine learning, optimization, and quantum simulation tasks. Benchmarks are chosen to scale with processor size, and the framework incorporates cost and resource estimation to support practical evaluation. Using Metriq, we collect and publicly release results from more than ten quantum computers across multiple hardware vendors, enabling systematic cross-platform comparison. The resulting curated dataset also reveals the practical strengths and limitations of individual benchmarks, creating a feedback loop that informs the ongoing refinement of the suite. To summarize performance across the benchmark suite, we introduce the Metriq Score, a composite index aggregating benchmark outcomes. We further present cross-benchmark analyses enabled by the shared dataset and their correlations with hardware calibration metrics. Through open development and data sharing, Metriq provides a practical foundation for reproducible benchmarking of quantum computers as hardware and benchmarking methods continue to evolve.
This research paper provides an in-depth examination of verification and testing approaches for quantum circuits, focusing on methodologies essential for ensuring the correctness, reliability and operational efficiency of quantum computing systems. Since quantum circuits function on the fundamental principles of superposition and entanglement, they present verification challenges that cannot be effectively addressed using conventional classical testing techniques. As a result, the development of specialized quantum-specific verification strategies has become critically important. The study highlights simulation-based verification as a foundational technique, wherein the outcomes of quantum circuit simulations are systematically compared with results obtained from physical quantum hardware. This process enables the identification of functional inconsistencies and supports iterative refinement of circuit designs. In addition, randomized benchmarking is examined as a key evaluation method for estimating circuit fidelity and quantifying error rates through the application of random gate sequences and performance comparisons against established benchmarks. To further improve system robustness, the research investigates fault-tolerant mechanisms, particularly quantum error correction codes, which play a vital role in minimizing the effects of noise, decoherence and hardware imperfections. The integration of advanced quantum metrology and characterization techniques is also explored, enabling precise measurement and detailed analysis of quantum system behavior. These techniques provide deeper insights into circuit performance and contribute significantly to validation processes. By combining simulation-based verification, randomized benchmarking, fault-tolerant protocols and quantum metrology, this study proposes a comprehensive and reliable framework for quantum circuit verification and testing. The findings contribute to the advancement of dependable quantum technologies and support their growing applications in areas such as cryptography, materials science and other emerging domains.
Abstract We present an industrial end-user perspective on the current state of quantum computing hardware for one specific technological approach, the neutral atom platform. Our aim is to assist developers in understanding the impact of the specific properties of these devices on the effectiveness of algorithm execution. Based on discussions with different vendors and recent literature, we discuss the performance data of the neutral atom platform. Specifically, we focus on the physical qubit architecture, which affects state preparation, qubit-to-qubit connectivity, gate fidelities, native gate instruction set, and individual qubit stability. These factors determine both the quantum-part execution time and the end-to-end wall clock time relevant for end-users, but also the ability to perform fault-tolerant quantum computation in the future. We end with an overview of which applications have been shown to be well suited for the peculiar properties of neutral atom-based quantum computers.
Quantum computing is an emerging technology that has the potential to change the perspectives and applications of computing in general. A wide range of applications are enabled: from faster algorithmic solutions of classically still difficult problems to theoretically more secure communication protocols. A quantum computer uses the quantum mechanical effects of particles or particle-like systems, and a major similarity between quantum and classical computers consists of both being abstracted as information processing machines. Whereas a classical computer operates on classical digital information, the quantum computer processes quantum information, which shares similarities with analog signals. One of the central differences between the two types of information is that classical information is more fault-tolerant when compared to its quantum counterpart. Faults are the result of the quantum systems being interfered by external noise, but during the last decades quantum error correction codes (QECC) were proposed as methods to reduce the effect of noise. Reliable quantum circuits are the result of designing circuits that operate directly on encoded quantum information, but the circuit’s reliability is also increased by supplemental redundancies, such as sub-circuit repetitions. Reliable quantum circuits have not been widely used, and one of the major obstacles is their vast associated resource overhead, but recent quantum computing architectures show promising scalabilities. Consequently the number of particles used for computing can be more easily increased, and that the classical control hardware (inherent for quantum computation) is also more reliable. Reliable quantum circuits haev been investigated for almost as long as general quantum computing, but their limited adoption (until recently) has not generated enough interest into their systematic design. The continuously increasing practical relevance of reliability motivates the present thesis to investigate some of the first answers to questions related to the background and the methods forming a reliable quantum circuit design stack. The specifics of quantum circuits are analysed from two perspectives: their probabilistic behaviour and their topological properties when a particular class of QECCs are used. The quantum phenomena, such as entanglement and superposition, are the computational resources used for designing quantum circuits. The discrete nature of classical information is missing for quantum information. An arbitrary quantum system can be in an infinite number of states, which are linear combinations of an exponential number of basis states. Any nontrivial linear combination of more than one basis states is called a state superposition. The effect of superpositions becomes evident when the state of the system is inferred (measured), as measurements are probabilistic with respect to their output: a nontrivial state superposition will collapse to one of the component basis states, and the measurement result is known exactly only after the measurement. A quantum system is, in general, composed from identical subsystems, meaning that a quantum computer (the complete system) operates on multiple similar particles (subsystems). Entanglement expresses the impossibility of separating the state of the subsystems from the state of the complete system: the nontrivial interactions between the subsystems result into a single indivisible state. Entanglement is an additional source of probabilistic behaviour: by measuring the state of a subsystem, the states of the unmeasured subsystems will probabilistically collapse to states from a well defined set of possible states. Superposition and entanglement are the building blocks of quantum information teleportation protocols, which in turn are used in state-of-the-art fault-tolerant quantum computing architectures. Information teleportation implies that the state of a subsystem is moved to a second subsystem without copying any information during the process. The probabilistic approach towards the design of quantum circuits is initiated by the extension of classical test and diagnosis methods. Quantum circuits are modelled similarly to classical circuits by defining gate-lists, and missing quantum gates are modelled by the single missing gate fault. The probabilistic approaches towards quantum circuits are facilitated by comparing these to stochastic circuits, which are a particular type of classical digital circuits. Stochastic circuits can be considered an emulation of analogue computing using digital components. A first proposed design method, based on the direct comparison, is the simulation of quantum circuits using stochastic circuits by mapping each quantum gate to a stochastic computing sub-circuit. The resulting stochastic circuit is compiled and simulated on FPGAs. The obtained results are encouraging and illustrate the capabilities of the proposed simulation technique. However, the exponential number of possible quantum basis states was translated into an exponential number of stochastic computing elements. A second contribution of the thesis is the proposal of test and diagnosis methods for both stochastic and quantum circuits. Existing verification (tomographic) methods of quantum circuits were targeting the reconstruction of the gate-lists. The repeated execution of the quantum circuit was followed by different but specific measurement at the circuit outputs. The similarities between stochastic and quantum circuits motivated the proposal of test and diagnosis methods that use a restricted set of measurement types, which minimise the number of circuit executions. The obtained simulation results show that the proposed validation methods improve the feasibility of quantum circuit tomography for small and medium size circuits. A third contribution of the thesis is the algorithmic formalisation of a problem encountered in teleportation-based quantum computing architectures. The teleportation results are probabilistic and require corrections represented as quantum gates from a particular set. However, there are known commutation properties of these gates with the gates used in the circuit. The corrections are not applied as dynamic gate insertions (during the circuit’s execution) into the gate-lists, but their effect is tracked through the circuit, and the corrections are applied only at circuit outputs. The simulation results show that the algorithmic solution is applicable for very large quantum circuits. Topological quantum computing (TQC) is based on a class of fault-tolerant quantum circuits that use the surface code as the underlying QECC. Quantum information is encoded in lattice-like structures and error protection is enabled by the topological properties of the lattice. The 3D structure of the lattice allows TQC computations to be visualised similarly to knot diagrams. Logical information is abstracted as strands and strand interactions (braids) represent logical quantum gates. Therefore, TQC circuits are abstracted using a geometrical description, which allows circuit input-output transformations (correlations) to be represented as geometric sub-structures. TQC design methods were not investigated prior to this work, and the thesis introduces the topological computational model by first analysing the necessary concepts. The proposed TQC design stack follows a top-down approach: an arbitrary quantum circuit is decomposed into the TQC supported gate set; the resulting circuit is mapped to a lattice of appropriate dimensions; relevant resulting topological properties are extracted and expressed using graphs and Boolean formulas. Both circuit representations are novel and applicable to TQC circuit synthesis and validation. Moreover, the Boolean formalism is broadened into a formal mechanism for proving circuit correctness. The thesis introduces TQC circuit synthesis, which is based on a novel logical gate geometric description, whose formal correctness is demonstrated. Two synthesis methods are designed, and both use a general planar representation of the circuit. Initial simulation results demonstrate the practicality and performance of the methods. An additional group of proposed design methods solves the problem of automatic correlation construction. The methods use validity criteria which were introduced and analysed beforehand in the thesis. Input-output correlations existing in the circuit are inferred using both the graph and the Boolean representation. The thesis extends the TQC state-of-the-art by recognising the importance of correlations in the validation process: correlation construction is used as a sub-routine for TQC circuit validation. The presented cross-layer validation procedure is useful when investigating both the QECC and the circuit, while a second proposed method is QECC-independent. Both methods are scalable and applicable even to very large circuits. The thesis completes with the analysis of TQC circuit identities, where the developed Boolean formalism is used. The proofs of former known circuit identities were either missing or complex, and the presented approach reduces the length of the proofs and represents a first step towards standardising them. A new identity is developed and detailed during the process of illustrating the known circuit identities. Reliable quantum circuits are a necessity for quantum computing to become reality, and specialised design methods are required to support the quest for scalable quantum computers. This thesis used a twofold approach towards this target: firstly by focusing on the probabilistic behaviour of quantum circuits, and secondly by considering the requirements of a promising quantum computing architecture, namely TQC. Both approaches resulted in a set of design methods enabling the investigation of reliable quantum circuits. The thesis contributes with the proposal of a new quantum simulation technique, no
Intermediate-scale quantum devices are becoming more reliable and may soon be harnessed to solve useful computational tasks. At the same time, common classical methods used to verify their computational output become intractable due to a prohibitive scaling of required resources with system size. Inspired by recent experimental progress, here we describe and analyze efficient cross-platform verification protocols for quantum states and show how these can be used to verify computations. We focus on the pairwise comparison between distant nodes of a quantum network, identify the most promising protocols, and discuss possible implementations in laboratory settings. As a proof of principle, we implement basic versions of these schemes on available quantum processors.