Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2107.08303 · Nature Communications

Quantum-enabled operation of a microwave-optical interface

Rishabh Sahu, William Hease, Alfredo Rueda, Georg Arnold, Liu Qiu, J. M. Fink

Published Mar 11, 2022• 74 citations
arXivHTMLPDF

Abstract

Solid-state microwave systems offer strong interactions for fast quantum logic and sensing but photons at telecom wavelength are the ideal choice for high-density low-loss quantum interconnects. A general-purpose interface that can make use of single photon effects requires < 1 input noise quanta, which has remained elusive due to either low efficiency or pump induced heating. Here we demonstrate coherent electro-optic modulation on nanosecond-timescales with only [Formula: see text] microwave input noise photons with a total bidirectional transduction efficiency of 8.7% (or up to 15% with [Formula: see text]), as required for near-term heralded quantum network protocols. The use of short and high-power optical pump pulses also enables near-unity cooperativity of the electro-optic interaction leading to an internal pure conversion efficiency of up to 99.5%. Together with the low mode occupancy this provides evidence for electro-optic laser cooling and vacuum amplification as predicted a decade ago.

DOI
10.1038/s41467-022-28924-2

Related papers

Bidirectional Electro-Optic Wavelength Conversion in the Quantum Ground State

William Hease, Alfredo Rueda, Rishabh Sahu +4 more

Microwave photonics lends the advantages of fiber optics to electronic sensing and communication systems.In contrast to nonlinear optics, electro-optic devices so far require classical modulation fields whose variance is dominated by electronic or thermal noise rather than quantum fluctuations.Here we demonstrate bidirectional single-sideband conversion of X band microwave to C band telecom light with a microwave mode occupancy as low as 0.025 ± 0.005 and an added output noise of less than or equal to 0.074 photons.This is facilitated by radiative cooling and a triply resonant ultra-low-loss transducer operating at millikelvin temperatures.The high bandwidth of 10.7 MHz and total (internal) photon conversion efficiency of 0.03% (0.67%) combined with the extremely slow heating rate of 1.1 added output noise photons per second for the highest available pump power of 1.48 mW puts near-unity efficiency pulsed quantum transduction within reach.Together with the non-Gaussian resources of superconducting qubits this might provide the practical foundation to extend the range and scope of current quantum networks in analogy to electrical repeaters in classical fiber optic communication.

arXiv:2005.12763•PRX Quantum•Nov 23, 2020•86 citations

Realizing a Quantum-enabled Interconnect Between Microwave and Telecom Light

Rishabh Sahu, William Hease, Alfredo Rueda +3 more

We present a quantum-enabled microwave-telecom interface with bidirectional conversion efficiencies up to 15% and added input noise quanta as low as 0.16. Moreover, we observe evidence for electro-optic laser cooling and vacuum amplification.

Conference on Lasers and Electro-Optics•Jan 1, 2022•0 citations

All-dielectric resonant cavity electro-optic transduction between microwave and telecom

Mihir Khanna, Yang Hu, Thomas Purdy

Achieving efficient microwave–optical transduction is a critical challenge for quantum networks where information is shared optically across disparate microwave systems and for coherent optical detection and manipulation of microwave states. Resonant electro-optic systems are being pursued as a means of efficiently bridging these frequencies. Here, we present a platform that employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry–Pérot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon-number conversion efficiency at the percent level, comparable to that of state-of-the-art devices at room temperature—sufficient to resolve the thermal occupation of the microwave mode—by taking advantage of the high-power handling, low loss, and low noise of all-dielectric devices. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave–optical quantum transduction.

Optica•May 29, 2026•0 citations

Toward Scalable Heterogeneous Quantum Networks: Microwave-Optical Transduction Across Platforms

Tarvir Anjum Aditto, Jaiyan Sadid Ifty, Khondokar Zahin

The development of scalable quantum networks requires coherent interfaces capable of converting microwave photons used in superconducting quantum processors into optical photons suitable for long-distance fiber transmission. This review surveys recent progress in microwave-to-optical quantum transduction across optomechanical, electro-optic, and magneto-optic platforms, with emphasis on conversion efficiency, bandwidth, added noise, and operating temperature. In addition to standard metrics, we propose the internal efficiency eta_in and the magnon decay rate kappa_m/2pi as normalized parameters that enable fairer comparison across heterogeneous implementations. Optomechanical systems achieve internal phonon-to-photon efficiencies of 93% with sub-quantum added noise of 0.25 quanta at millikelvin temperatures. Electro-optic devices based on LiNbO3 and AlN have advanced from room-temperature efficiencies below 1% to millikelvin systems with internal efficiencies approaching 99.5%, added noise as low as 0.16 quanta at 60 mK, and bandwidths extending to several tens of megahertz. Magneto-optic (optomagnonic) platforms exhibit the lowest efficiencies (typically $10^{-10}$ to $10^{-8})$, but offer intrinsic non-reciprocity and broadband magnonic operation, with emerging approaches based on topological heterostructures and magnon squeezing predicting enhancements up to $10^{-4}$. Optomechanical systems appear promising for high-fidelity quantum state transfer, electro-optic transducers for high-bandwidth coherent links, and magneto-optic devices for non-reciprocal network components. We discuss the fundamental trade-off between efficiency and added noise across all three platforms, and argue that heterogeneous microwave-optical transduction is emerging as a key enabling technology for distributed quantum computing and large-scale quantum networks.

quant-pharXiv:2605.26976•May 27, 2026•0 citations

Converting microwave and telecom photons with a silicon photonic nanomechanical interface

Georg Arnold, Matthias Wulf, Shabir Barzanjeh +5 more

Abstract Practical quantum networks require low-loss and noise-resilient optical interconnects as well as non-Gaussian resources for entanglement distillation and distributed quantum computation. The latter could be provided by superconducting circuits but existing solutions to interface the microwave and optical domains lack either scalability or efficiency, and in most cases the conversion noise is not known. In this work we utilize the unique opportunities of silicon photonics, cavity optomechanics and superconducting circuits to demonstrate a fully integrated, coherent transducer interfacing the microwave X and the telecom S bands with a total (internal) bidirectional transduction efficiency of 1.2% (135%) at millikelvin temperatures. The coupling relies solely on the radiation pressure interaction mediated by the femtometer-scale motion of two silicon nanobeams reaching a Vπ as low as 16 μV for sub-nanowatt pump powers. Without the associated optomechanical gain, we achieve a total (internal) pure conversion efficiency of up to 0.019% (1.6%), relevant for future noise-free operation on this qubit-compatible platform.

•Jan 1, 2020•75 citations

Converting microwave and telecom photons with a silicon photonic nanomechanical interface

G. Arnold, M. Wulf, S. Barzanjeh +5 more

Abstract Practical quantum networks require low-loss and noise-resilient optical interconnects as well as non-Gaussian resources for entanglement distillation and distributed quantum computation. The latter could be provided by superconducting circuits but existing solutions to interface the microwave and optical domains lack either scalability or efficiency, and in most cases the conversion noise is not known. In this work we utilize the unique opportunities of silicon photonics, cavity optomechanics and superconducting circuits to demonstrate a fully integrated, coherent transducer interfacing the microwave X and the telecom S bands with a total (internal) bidirectional transduction efficiency of 1.2% (135%) at millikelvin temperatures. The coupling relies solely on the radiation pressure interaction mediated by the femtometer-scale motion of two silicon nanobeams reaching a V π as low as 16 μV for sub-nanowatt pump powers. Without the associated optomechanical gain, we achieve a total (internal) pure conversion efficiency of up to 0.019% (1.6%), relevant for future noise-free operation on this qubit-compatible platform.

arXiv:2002.11628•Nature Communications•Sep 8, 2020•83 citations
Solid-state microwave systems offer strong interactions for fast quantum logic and sensing but photons at telecom wavelength are the ideal choice for high-density low-loss quantum interconnects. A general-purpose interface that can make use of single photon effects requires < 1 input noise quanta, which has remained elusive due to either low efficiency or pump induced heating. Here we demonstrate coherent electro-optic modulation on nanosecond-timescales with only [Formula: see text] microwave input noise photons with a total bidirectional transduction efficiency of 8.7% (or up to 15% with [Formula: see text]), as required for near-term heralded quantum network protocols. The use of short and high-power optical pump pulses also enables near-unity cooperativity of the electro-optic interaction leading to an internal pure conversion efficiency of up to 99.5%. Together with the low mode occupancy this provides evidence for electro-optic laser cooling and vacuum amplification as predicted a decade ago.
Microwave photonics lends the advantages of fiber optics to electronic sensing and communication systems.In contrast to nonlinear optics, electro-optic devices so far require classical modulation fields whose variance is dominated by electronic or thermal noise rather than quantum fluctuations.Here we demonstrate bidirectional single-sideband conversion of X band microwave to C band telecom light with a microwave mode occupancy as low as 0.025 ± 0.005 and an added output noise of less than or equal to 0.074 photons.This is facilitated by radiative cooling and a triply resonant ultra-low-loss transducer operating at millikelvin temperatures.The high bandwidth of 10.7 MHz and total (internal) photon conversion efficiency of 0.03% (0.67%) combined with the extremely slow heating rate of 1.1 added output noise photons per second for the highest available pump power of 1.48 mW puts near-unity efficiency pulsed quantum transduction within reach.Together with the non-Gaussian resources of superconducting qubits this might provide the practical foundation to extend the range and scope of current quantum networks in analogy to electrical repeaters in classical fiber optic communication.
Achieving efficient microwave–optical transduction is a critical challenge for quantum networks where information is shared optically across disparate microwave systems and for coherent optical detection and manipulation of microwave states. Resonant electro-optic systems are being pursued as a means of efficiently bridging these frequencies. Here, we present a platform that employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry–Pérot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon-number conversion efficiency at the percent level, comparable to that of state-of-the-art devices at room temperature—sufficient to resolve the thermal occupation of the microwave mode—by taking advantage of the high-power handling, low loss, and low noise of all-dielectric devices. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave–optical quantum transduction.
The development of scalable quantum networks requires coherent interfaces capable of converting microwave photons used in superconducting quantum processors into optical photons suitable for long-distance fiber transmission. This review surveys recent progress in microwave-to-optical quantum transduction across optomechanical, electro-optic, and magneto-optic platforms, with emphasis on conversion efficiency, bandwidth, added noise, and operating temperature. In addition to standard metrics, we propose the internal efficiency eta_in and the magnon decay rate kappa_m/2pi as normalized parameters that enable fairer comparison across heterogeneous implementations. Optomechanical systems achieve internal phonon-to-photon efficiencies of 93% with sub-quantum added noise of 0.25 quanta at millikelvin temperatures. Electro-optic devices based on LiNbO3 and AlN have advanced from room-temperature efficiencies below 1% to millikelvin systems with internal efficiencies approaching 99.5%, added noise as low as 0.16 quanta at 60 mK, and bandwidths extending to several tens of megahertz. Magneto-optic (optomagnonic) platforms exhibit the lowest efficiencies (typically 10−1010^{-10}10−10 to 10−8)10^{-8})10−8), but offer intrinsic non-reciprocity and broadband magnonic operation, with emerging approaches based on topological heterostructures and magnon squeezing predicting enhancements up to 10−410^{-4}10−4. Optomechanical systems appear promising for high-fidelity quantum state transfer, electro-optic transducers for high-bandwidth coherent links, and magneto-optic devices for non-reciprocal network components. We discuss the fundamental trade-off between efficiency and added noise across all three platforms, and argue that heterogeneous microwave-optical transduction is emerging as a key enabling technology for distributed quantum computing and large-scale quantum networks.
Abstract Practical quantum networks require low-loss and noise-resilient optical interconnects as well as non-Gaussian resources for entanglement distillation and distributed quantum computation. The latter could be provided by superconducting circuits but existing solutions to interface the microwave and optical domains lack either scalability or efficiency, and in most cases the conversion noise is not known. In this work we utilize the unique opportunities of silicon photonics, cavity optomechanics and superconducting circuits to demonstrate a fully integrated, coherent transducer interfacing the microwave X and the telecom S bands with a total (internal) bidirectional transduction efficiency of 1.2% (135%) at millikelvin temperatures. The coupling relies solely on the radiation pressure interaction mediated by the femtometer-scale motion of two silicon nanobeams reaching a Vπ as low as 16 μV for sub-nanowatt pump powers. Without the associated optomechanical gain, we achieve a total (internal) pure conversion efficiency of up to 0.019% (1.6%), relevant for future noise-free operation on this qubit-compatible platform.
Abstract Practical quantum networks require low-loss and noise-resilient optical interconnects as well as non-Gaussian resources for entanglement distillation and distributed quantum computation. The latter could be provided by superconducting circuits but existing solutions to interface the microwave and optical domains lack either scalability or efficiency, and in most cases the conversion noise is not known. In this work we utilize the unique opportunities of silicon photonics, cavity optomechanics and superconducting circuits to demonstrate a fully integrated, coherent transducer interfacing the microwave X and the telecom S bands with a total (internal) bidirectional transduction efficiency of 1.2% (135%) at millikelvin temperatures. The coupling relies solely on the radiation pressure interaction mediated by the femtometer-scale motion of two silicon nanobeams reaching a V π as low as 16 μV for sub-nanowatt pump powers. Without the associated optomechanical gain, we achieve a total (internal) pure conversion efficiency of up to 0.019% (1.6%), relevant for future noise-free operation on this qubit-compatible platform.