Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2107.03471 · Quantum Science and Technology

An open-endcap blade trap for radial-2D ion crystals

Yuanheng Xie, Jiafeng Cui, Marissa D’Onofrio, A. J. Rasmusson, Stephen W. Howell, Philip Richerme

Published Aug 17, 2021• 12 citations
arXivHTMLPDF

Abstract

Abstract We present the design and experimental demonstration of an open-endcap radio frequency trap to confine ion crystals in the radial-two dimensional (2D) structural phase. The central axis of the trap is kept free of obstructions to allow for site-resolved imaging of ions in the 2D crystal plane, and the confining potentials are provided by four segmented blade electrodes. We discuss the design challenges, fabrication techniques, and voltage requirements for implementing this open-endcap trap. Finally, we validate its operation by confining up to 29 ions in a 2D triangular lattice, oriented such that both in-plane principal axes of the 2D crystal lie in the radial direction.

DOI
10.1088/2058-9565/ac1e38

Related papers

A Paul trap with sectored ring electrodes for experiments with two-dimensional ion crystals

Megan Ivory, A. Kato, A. Hasanzadeh +1 more

We have developed a trapped ion system for producing two-dimensional (2D) ion crystals for applications in scalable quantum computing, quantum simulations, and 2D crystal phase transition and defect studies. The trap is a modification of a Paul trap with its ring electrode flattened and split into eight identical sectors and its two endcap electrodes shaped as truncated hollow cones for laser and imaging optics access. All ten trap electrodes can be independently DC-biased to create various aspect ratio trap geometries. We trap and Doppler cool 2D crystals of up to 30 Ba+ ions and demonstrate the tunability of the trapping potential both in the plane of the crystal and in the transverse direction.

arXiv:2001.05013•Review of Scientific Instruments•May 1, 2020•12 citations

A versatile laser-machined rf trap for arrays of 100+ ions

Frank G. Schroer, Ilyoung Jung, Thomas W. Burkle +4 more

Large ion crystals in diverse geometries are a key resource for quantum simulation experiments. In this work, we introduce a macroscopic rf trap that supports a wide variety of one-dimensional ion configurations as well as lateral two-dimensional crystals with more than 100 ions. Our design is based on precision-machined fused silica wafers that are stacked to form the trap structure. Ten independently biased electrodes provide flexible control over the axial potential, enabling long one-dimensional crystals, isospaced ion strings, split-well chains, and two-dimensional arrays with tunable aspect ratios. We present the design and fabrication process for this trap and demonstrate the ability to tune the radial secular frequencies, detect and compensate micromotion, rotate the principal axes, and characterize trapped ion heating rates. All trap design and documentation files are freely available alongside this work, to facilitate adoption and further development within the ion trap community.

quant-pharXiv:2607.13342•Jul 16, 2026•0 citations

Radial Two-Dimensional Ion Crystals in a Linear Paul Trap

Marissa D’Onofrio, Yuanheng Xie, A. J. Rasmusson +3 more

We experimentally study two-dimensional (2D) Coulomb crystals in the "radial-2D" phase of a linear Paul trap. This phase is identified by a 2D ion lattice aligned entirely with the radial plane and is created by imposing a large ratio of axial to radial trapping potentials. Using arrays of up to 19 ^{171}Yb^{+} ions, we demonstrate that the structural phase boundaries of such crystals are well described by the pseudopotential approximation, despite the time-dependent ion positions driven by intrinsic micromotion. We further observe that micromotion-induced heating of the radial-2D crystal is confined to the radial plane. Finally, we verify that the transverse motional modes, which are used in most ion-trap quantum simulation schemes, are well-predictable numerically and remain decoupled and cold in this geometry. Our results establish radial-2D ion crystals as a robust experimental platform for realizing a variety of theoretical proposals in quantum simulation and computation.

arXiv:2012.12766•Physical Review Letters•Jul 9, 2021•40 citations

Two-dimensional ion crystals in radio-frequency traps for quantum simulation

Philip Richerme

The computational difficulty of solving fully quantum many-body spin problems is a significant obstacle to understanding the behavior of strongly correlated quantum matter. Experimental ion trap quantum simulation is a promising approach for studying these lattice spin models, but has so far been limited to one-dimensional systems. This work argues that such quantum simulation techniques are extendable to a two-dimensional (2D) ion crystal confined in a radio-frequency (rf) trap. Using appropriately chosen parameters, driven ion motion due to the rf fields can be made small and will not limit the types of quantum spin models that can be experimentally encoded. The rf-driven motion is calculated to modestly reduce the stability region of a 2D crystal and must be considered when designing the 2D trap. The system will be scalable to 100+ quantum particles, far beyond the realm of classical intractability, while maintaining the traditional ion trap strengths of individual-ion control, long quantum coherence times, and site-resolved projective spin measurements.

arXiv:1604.08523•Physical Review A•Sep 20, 2016•44 citations

Bilayer ion trap design for 2D arrays

Gavin Nop, Jonathan D. H. Smith, Daniel Stick +1 more

Abstract Junctions are fundamental elements that support qubit locomotion in two-dimensional ion trap arrays and enhance connectivity in emerging trapped-ion quantum computers. In surface ion traps they have typically been implemented by shaping radio frequency (RF) electrodes in a single plane to minimize the disturbance to the pseudopotential. However, this method introduces issues related to RF lead routing that can increase power dissipation and the likelihood of voltage breakdown. Here, we propose and simulate a novel two-layer junction design incorporating two perpendicularly rotoreflected (rotated, then reflected) linear ion traps. The traps are vertically separated, and create a trapping potential between their respective planes. The orthogonal orientation of the RF electrodes of each trap relative to the other provides perpendicular axes of confinement that can be used to realize transport in two dimensions. While this design introduces manufacturing and operating challenges, as now two separate structures have to be precisely positioned relative to each other in the vertical direction and optical access from the top is obscured, it obviates the need to route RF leads below the top surface of the trap and eliminates the pseudopotential bumps that occur in typical junctions. In this paper the stability of idealized ion transfer in the new configuration is demonstrated, both by solving the Mathieu equation analytically to identify the stable regions and by numerically modeling ion dynamics. Our novel junction layout has the potential to enhance the flexibility of microfabricated ion trap control to enable large-scale trapped-ion quantum computing.

arXiv:2310.07195•Quantum Science and Technology•Apr 16, 2024•2 citations

Linear Paul trap for strontium ions

Dana J. Berkeland

We demonstrate a linear radio-frequency trap for confining strontium ions that is simply constructed nearly entirely with commercial off-the-shelf components. The electrodes of this trap are spaced to allow tight radial confinement, and segmented to give tight axial confinement with minimal distortion of the radio-frequency field. The resulting secular frequencies of the trap are 1 MHz in the radial direction and 100 kHz in the axial direction, the ions can be imaged with 2–3 μm resolution, and we detect over 20 000 photons per second per ion. This article describes the construction of the vital parts of the trap system, the laser system and optics used to Doppler cool the ions and to observe quantum jumps, and the operation and behavior of the complete system.

Review of Scientific Instruments•Aug 1, 2002•52 citations
Abstract We present the design and experimental demonstration of an open-endcap radio frequency trap to confine ion crystals in the radial-two dimensional (2D) structural phase. The central axis of the trap is kept free of obstructions to allow for site-resolved imaging of ions in the 2D crystal plane, and the confining potentials are provided by four segmented blade electrodes. We discuss the design challenges, fabrication techniques, and voltage requirements for implementing this open-endcap trap. Finally, we validate its operation by confining up to 29 ions in a 2D triangular lattice, oriented such that both in-plane principal axes of the 2D crystal lie in the radial direction.
We have developed a trapped ion system for producing two-dimensional (2D) ion crystals for applications in scalable quantum computing, quantum simulations, and 2D crystal phase transition and defect studies. The trap is a modification of a Paul trap with its ring electrode flattened and split into eight identical sectors and its two endcap electrodes shaped as truncated hollow cones for laser and imaging optics access. All ten trap electrodes can be independently DC-biased to create various aspect ratio trap geometries. We trap and Doppler cool 2D crystals of up to 30 Ba+ ions and demonstrate the tunability of the trapping potential both in the plane of the crystal and in the transverse direction.
Large ion crystals in diverse geometries are a key resource for quantum simulation experiments. In this work, we introduce a macroscopic rf trap that supports a wide variety of one-dimensional ion configurations as well as lateral two-dimensional crystals with more than 100 ions. Our design is based on precision-machined fused silica wafers that are stacked to form the trap structure. Ten independently biased electrodes provide flexible control over the axial potential, enabling long one-dimensional crystals, isospaced ion strings, split-well chains, and two-dimensional arrays with tunable aspect ratios. We present the design and fabrication process for this trap and demonstrate the ability to tune the radial secular frequencies, detect and compensate micromotion, rotate the principal axes, and characterize trapped ion heating rates. All trap design and documentation files are freely available alongside this work, to facilitate adoption and further development within the ion trap community.
We experimentally study two-dimensional (2D) Coulomb crystals in the "radial-2D" phase of a linear Paul trap. This phase is identified by a 2D ion lattice aligned entirely with the radial plane and is created by imposing a large ratio of axial to radial trapping potentials. Using arrays of up to 19 ^{171}Yb^{+} ions, we demonstrate that the structural phase boundaries of such crystals are well described by the pseudopotential approximation, despite the time-dependent ion positions driven by intrinsic micromotion. We further observe that micromotion-induced heating of the radial-2D crystal is confined to the radial plane. Finally, we verify that the transverse motional modes, which are used in most ion-trap quantum simulation schemes, are well-predictable numerically and remain decoupled and cold in this geometry. Our results establish radial-2D ion crystals as a robust experimental platform for realizing a variety of theoretical proposals in quantum simulation and computation.
The computational difficulty of solving fully quantum many-body spin problems is a significant obstacle to understanding the behavior of strongly correlated quantum matter. Experimental ion trap quantum simulation is a promising approach for studying these lattice spin models, but has so far been limited to one-dimensional systems. This work argues that such quantum simulation techniques are extendable to a two-dimensional (2D) ion crystal confined in a radio-frequency (rf) trap. Using appropriately chosen parameters, driven ion motion due to the rf fields can be made small and will not limit the types of quantum spin models that can be experimentally encoded. The rf-driven motion is calculated to modestly reduce the stability region of a 2D crystal and must be considered when designing the 2D trap. The system will be scalable to 100+ quantum particles, far beyond the realm of classical intractability, while maintaining the traditional ion trap strengths of individual-ion control, long quantum coherence times, and site-resolved projective spin measurements.
Abstract Junctions are fundamental elements that support qubit locomotion in two-dimensional ion trap arrays and enhance connectivity in emerging trapped-ion quantum computers. In surface ion traps they have typically been implemented by shaping radio frequency (RF) electrodes in a single plane to minimize the disturbance to the pseudopotential. However, this method introduces issues related to RF lead routing that can increase power dissipation and the likelihood of voltage breakdown. Here, we propose and simulate a novel two-layer junction design incorporating two perpendicularly rotoreflected (rotated, then reflected) linear ion traps. The traps are vertically separated, and create a trapping potential between their respective planes. The orthogonal orientation of the RF electrodes of each trap relative to the other provides perpendicular axes of confinement that can be used to realize transport in two dimensions. While this design introduces manufacturing and operating challenges, as now two separate structures have to be precisely positioned relative to each other in the vertical direction and optical access from the top is obscured, it obviates the need to route RF leads below the top surface of the trap and eliminates the pseudopotential bumps that occur in typical junctions. In this paper the stability of idealized ion transfer in the new configuration is demonstrated, both by solving the Mathieu equation analytically to identify the stable regions and by numerically modeling ion dynamics. Our novel junction layout has the potential to enhance the flexibility of microfabricated ion trap control to enable large-scale trapped-ion quantum computing.
We demonstrate a linear radio-frequency trap for confining strontium ions that is simply constructed nearly entirely with commercial off-the-shelf components. The electrodes of this trap are spaced to allow tight radial confinement, and segmented to give tight axial confinement with minimal distortion of the radio-frequency field. The resulting secular frequencies of the trap are 1 MHz in the radial direction and 100 kHz in the axial direction, the ions can be imaged with 2–3 μm resolution, and we detect over 20 000 photons per second per ion. This article describes the construction of the vital parts of the trap system, the laser system and optics used to Doppler cool the ions and to observe quantum jumps, and the operation and behavior of the complete system.