Abstract Quantum states of light can enable sensing configurations with sensitivities beyond the shot-noise limit. In order to better take advantage of available quantum resources and obtain the maximum possible sensitivity, it is necessary to determine fundamental sensitivity limits for different possible configurations for a given sensing system. Here, due to their wide applicability, we focus on optical resonance sensors, which detect a change in a parameter of interest through a resonance shift. We compare their fundamental sensitivity limits set by the quantum Cramér–Rao bound (QCRB) based on the estimation of changes in transmission or phase of a probing bright two-mode squeezed state (bTMSS) of light. We show that the fundamental sensitivity results from an interplay between the QCRB and the transfer function of the system. As a result, for a resonance sensor with a Lorentzian lineshape a phase-based scheme outperforms a transmission-based one for most of the parameter space; however, this is not the case for lineshapes with steeper slopes, such as higher order Butterworth lineshapes. Furthermore, such an interplay results in conditions under which the phase-based scheme provides a higher sensitivity but a smaller degree of quantum enhancement than the transmission-based scheme. We also study the effect of losses external to the sensor on the degree of quantum enhancement and show that for certain conditions, probing with a classical state can provide a higher sensitivity than probing with a bTMSS. Finally, we discuss detection schemes, namely optimized intensity-difference and optimized homodyne detection, that can achieve the fundamental sensitivity limits even in the presence of external losses.
Abstract Quantum states of light can enable sensing configurations with sensitivities beyond the shot-noise limit. In order to better take advantage of available quantum resources and obtain the maximum possible sensitivity, it is necessary to determine fundamental sensitivity limits for different possible configurations for a given sensing system. Here, due to their wide applicability, we focus on optical resonance sensors, which detect a change in a parameter of interest through a resonance shift. We compare their fundamental sensitivity limits set by the quantum Cramér–Rao bound (QCRB) based on the estimation of changes in transmission or phase of a probing bright two-mode squeezed state (bTMSS) of light. We show that the fundamental sensitivity results from an interplay between the QCRB and the transfer function of the system. As a result, for a resonance sensor with a Lorentzian lineshape a phase-based scheme outperforms a transmission-based one for most of the parameter space; however, this is not the case for lineshapes with steeper slopes, such as higher order Butterworth lineshapes. Furthermore, such an interplay results in conditions under which the phase-based scheme provides a higher sensitivity but a smaller degree of quantum enhancement than the transmission-based scheme. We also study the effect of losses external to the sensor on the degree of quantum enhancement and show that for certain conditions, probing with a classical state can provide a higher sensitivity than probing with a bTMSS. Finally, we discuss detection schemes, namely optimized intensity-difference and optimized homodyne detection, that can achieve the fundamental sensitivity limits even in the presence of external losses.
The minimum possible uncertainty when estimating a parameter, in this case transmission, is bounded by the quantum Cramér-Rao bound (QCRB). This bound is independent of the measurement technique and as result can be used to quantify how close a measurement is to the optimal one for a given system and probing state, as an optimal measurement saturates the QCRB. The ability to perform transmission measurements through an optical system at the QCRB can lead to enhancements in the calibration of optimal states for interferometers, the characterization of high efficiency photodetectors, or the sensitivity of sensing devices based on transmission, such as plasmonic sensors or spectroscopy. We show theoretically that the ultimate sensitivity limit per photon in the estimation of transmission, achievable with Fock states or vacuum two-mode squeezed states (vTMSS), can be approached through the use of bright quantum states of light, such as bright single-mode squeezed states (bSMSS) or bright two-mode squeezed states (bTMSS). The use of bright quantum states has the advantage that they can be generated with a significantly larger number of photons, which leads to an absolute sensitivity that can be many orders of magnitude larger than the one achieved with Fock states or vTMSS. We identify a measurement strategy that saturates the QCRB for these bright quantum states and shown experimentally that transmission estimation at the QCRB can be achieved with bTMSS through optimized intensity difference measurements.
The field of quantum metrology seeks to apply quantum techniques and/or resources to classical sensing approaches with the goal of enhancing the precision in the estimation of a parameter beyond what can be achieved with classical resources. Theoretically, the fundamental minimum uncertainty in the estimation of a parameter for a given probing state is bounded by the quantum Cramér-Rao bound. From a practical perspective, it is necessary to find physical measurements that can saturate this fundamental limit and to show experimentally that it is possible to perform measurements with the required precision to do so. Here we perform experiments that saturate the quantum Cramér-Rao bound for transmission estimation over a wide range of transmissions when probing the system under study with a continuous wave bright two-mode squeezed state. To properly take into account the imperfections in the generation of the quantum state, we extend our previous theoretical results to incorporate the measured properties of the generated quantum state. For our largest transmission level of 84%, we show a 62% reduction over the optimal classical protocol in the variance in transmission estimation when probing with a bright two-mode squeezed state with -8 dB of intensity-difference squeezing. Given that transmission estimation is an integral part of many sensing protocols, such as plasmonic sensing, spectroscopy, calibration of the quantum efficiency of detectors, etc., the results presented promise to have a significant impact on a number of applications in various fields of research.
We review various schemes of quantum-enhanced optical interferometers, both linear (SU(2)) and non-linear (SU(1,1)) ones, as well as hybrid SU(2)/SU(1,1) options, using the unified modular approach based on the Quantum Cramèr–Rao bound (QCRB), and taking into account the practical limitations pertinent to all real-world highly-sensitive interferometers. We focus on three important cases defined by the interferometer symmetry: (i) the asymmetric single-arm interferometer; (ii) the symmetric two-arm interferometer with the antisymmetric phase shifts in the arms; and (iii) the symmetric two-arm interferometer with the symmetric phase shifts in the arms. We show that while the optimal regimes for these cases differ significantly, their QCRBs asymptotically correspond to the same squeezing-enhanced shot noise limit (2), which first appeared in the pioneering work by C. Caves in 1981.We show also that in all considered cases the QCRB can be asymptotically saturated by the standard (direct or homodyne) detection schemes.
Recently, there has been significant interest in multiple-parameter quantum estimation techniques that exploit quantum resources. In particular, the estimation of optical transmission is a crucial parameter in various scientific fields and industries. In optical-based sensing, precision can be enhanced through two approaches: increasing the number of photons that interact with the samples and utilizing quantum states of light. In this paper, we investigate multiple transmission estimation using bright two-mode squeezed states (bTMSSs), which combine the advantages of both bright light and quantum states. We calculate the precision bound for multiple transmission estimation by employing multiple copies of bTMSSs with experimentally feasible optimal measurement, determining both the quantum Cramer-Rao bound and the Cramer-Rao bound. Our results demonstrate that multiple copies of bTMSSs can achieve quantum-enhanced sensitivity for multiple transmissions compared to coherent states, and the ultimate limit of precision can be attained in regions with high nonlinear gain. Furthermore, as an application, we show the quantum-enhanced sensing in circular dichroism sensing using a pair of bTMSSs. Our strategy for multiple transmission estimation offers a practical platform for exploring real-world quantum sensing applications.
The utilization of quantum resources can enhance the sensitivity of conventional measurement techniques beyond the standard quantum limit (SQL). The objective of quantum metrology is to enable such quantum enhancements in practical devices. To achieve this objective, it is essential to have devices that are compatible with existing quantum resources operating within the SQL. Plasmonic sensors are promising candidates among these devices since they are extensively employed in biochemical sensing applications. Plasmonic sensors exhibit a response to slight variations in the local refractive index, which manifests as a shift in their resonance response. This shift, in turn, induces changes in the amplitude and phase of the probing light. By utilizing quantum states of light, such as NOON states, squeezed states, or Fock states, to probe these sensors, the measurement noise floor can be lowered, enabling the detection of signals below the SQL. In this study, we compare two configurations of quantum plasmonic sensing: phase-based and amplitude-based. By considering the Quantum Cramér Rao bound for both configurations, we demonstrate that the phase-based configuration can more effectively exploit the available quantum resources than the amplitude-based configuration. A limitation of this work is that it did not consider loss.
Enhancing the precision of a measurement requires maximizing the information that can be gained about the quantity of interest from probing a system. For optical-based measurements, such an enhancement can be achieved through two approaches, increasing the number of photons used to interrogate the system and using quantum states of light to increase the amount of quantum Fisher information gained per photon. Here we consider the use of quantum states of light with a large number of photons, namely the bright single-mode squeezed state and the bright two-mode squeezed state, which take advantage of both of these approaches for the problem of transmission estimation. We show that, in the limit of large squeezing, these states approach the maximum possible quantum Fisher information per photon for transmission estimation that is achieved with the Fock state and the vacuum two-mode squeezed state. Since the bright states we consider can be generated at powers much higher than those of the quantum states that achieve the maximum quantum Fisher information per photon, they can achieve a much higher absolute precision as quantified by the quantum Cram\'er-Rao bound. We discuss the effects of losses external to the system on the precision of transmission estimation and identify simple measurement techniques that can saturate the quantum Cram\'er-Rao bound for the bright squeezed states even in the presence of such external losses.