Quantum key distribution (QKD) is a technology that allows secure key exchange between two distant users. A widespread adoption of QKD requires the development of simple, low-cost, and stable systems. However, implementation of the current QKD requires a complex self-alignment process during the initial stage and an additional hardware to compensate the environmental disturbances. In this study, we present the implementation of a simple QKD with the help of a stable transmitter-receiver scheme, which simplifies the self-alignment and is robust enough to withstand environmental disturbances. In case of the stability test, the implementation system is able to remain stable for 48 h and exhibits an average quantum bit error rate of less than 1% without any feedback control. The scheme is also tested over a fiber spool, obtaining a stable and secure finite key rate of 7.32k bits per second over a fiber spool extending up to 75 km. The demonstrated long-term stability and obtained secure key rate prove that our method of implementation is a promising alternative for practical QKD systems, in particular, for CubeSat platform and satellite applications.
Quantum key distribution (QKD) is a technology that allows secure key exchange between two distant users. A widespread adoption of QKD requires the development of simple, low-cost, and stable systems. However, implementation of the current QKD requires a complex self-alignment process during the initial stage and an additional hardware to compensate the environmental disturbances. In this study, we present the implementation of a simple QKD with the help of a stable transmitter-receiver scheme, which simplifies the self-alignment and is robust enough to withstand environmental disturbances. In case of the stability test, the implementation system is able to remain stable for 48 h and exhibits an average quantum bit error rate of less than 1% without any feedback control. The scheme is also tested over a fiber spool, obtaining a stable and secure finite key rate of 7.32k bits per second over a fiber spool extending up to 75 km. The demonstrated long-term stability and obtained secure key rate prove that our method of implementation is a promising alternative for practical QKD systems, in particular, for CubeSat platform and satellite applications.
Quantum key distribution (QKD) relies on quantum communication to allow distant parties to share a secure cryptographic key. Widespread adoption of QKD in current telecommunication networks will require the development of simple, low-cost, and stable systems. However, current QKD implementations usually include additional hardware that perform auxiliary tasks such as temporal synchronization and polarization basis tracking. Here we present a polarization-based QKD system operating at 1550 nm that performs synchronization and polarization compensation by exploiting only the hardware already needed for the quantum communication task. Polarization encoding is performed by a self-compensating Sagnac loop modulator that exhibits high temporal stability and the lowest intrinsic quantum bit error rate reported so far. The QKD system was tested over a fiber-optic link, demonstrating tolerance up to about 40 dB of channel losses. Due to its reduced hardware requirements and the quality of the source, this work represents an important step towards technologically mature QKD systems.
In this work, we present a new time-bin phase-encoding quantum key distribution (QKD), where the transmitter utilizes an inherently stable Sagnac-type interferometer, and has comparable electrical requirements to existing polarization or phase encoding schemes. This approach does not require intensity calibration and is insensitive to environmental disturbances, making it both flexible and high-performing. We conducted experiments with a compact QKD system to demonstrate the stability and secure key rate performance of the presented scheme. The results show a typical secure key rate of 6.2 kbps@20 dB and 0.4 kbps@30 dB with channel loss emulated by variable optical attenuators. A continuous test of 120-km fiber spool shows a stable quantum bit error rate of the time-bin basis within 0.4%∼0.6% over a consecutive 9-day period without any adjustment. This intrinsically stable and compatible scheme of time-bin phase encoding is extensively applicable in various QKD experiments, including BB84 and measurement-device-independent QKD.
We have developed a simple time-bin phase encoding quantum key distribution system, using the optical injection locking technique. This setup incorporates both the merits of simplicity and stability in encoding, and immunity to channel disturbance. We have demonstrated the field implementation of quantum key distribution over long-distance deployed aerial fiber automatically. During the 70-day field test, we achieved approximately a 1.0 kbps secure key rate with stable performance. Our work takes an important step toward widespread implementation of QKD systems in diverse and complex real-life scenarios.
Quantum key distribution (QKD) is a technology that allows two users to communicate with theoretically perfect security using standard optical fibres. This is possible by transmitting the key on single photons, meaning a measurement by an eavesdropper disturbs the system in a way observable to the legitimate parties. The technology has advanced since the first protocol proposed in 1984, to the stage where there are now many protocols that can be experimentally implemented. These protocols have allowed secure keys to be generated over distances greater than 400 km and with secure key rates over 10 Mbit/s. In a metropolitan QKD network, it would be desirable for as many users to be connected as possible. Unfortunately, each protocol comes with different requirements on the transmitter and receiver. Even within a single protocol, different clock rates can require individualised transmitter and receiver hardware. This prohibits users from communicating with all receivers, unless they have complex transmitters with hardware for many protocols. This thesis develops a transmitter for practical QKD that is able to adapt to a number of different protocols with no changes to the hardware. The transmitter works using optical injection locking, where a pulse preparation laser adopts the phase of a phase preparation laser. Controlling the phase and intensity of the pulses in this way removes the side channel ordinarily present with direct modulation, in that the phase, intensity and frequency simultaneously change in response to an applied current. The cavity-enhanced electro-optic effect allows for the first demonstration of sub-volt half-wave phase modulation at high clock rates. The transmitter successfully demonstrates phase encoding, intensity encoding and on-demand phase randomisation. This allows for the experimental realisation and direct comparison of different QKD protocols, including one that has never before been implemented due to experimental complexity. A stable intensity modulator is also developed, based on a Sagnac interferometer. This removes a side channel in QKD systems and integrates well with the directly-modulated quantum transmitter. This development also means that the transmitter can implement all current two-party QKD protocols based on weak coherent pulses. The transmitter has the potential to become the standard transmitter for future quantum communication networks due to its stability, versatility and power efficiency. The design could also be demonstrated on a photonic chip, making it compact enough to fit in small transmitter units.
Quantum key distribution (QKD) is a cryptographic technique that uses quantum mechanical principles to enable secure key distribution, offering information-theoretic security guaranteed by physical laws. Practical deployment of QKD requires robust, cost-effective systems that can operate in challenging field environments. A major challenge is achieving reliable clock synchronization without adding hardware complexity. Conventional approaches often use separate classical light signals, which increase costs and introduce noise that degrades quantum channel performance. To address this limitation, we demonstrate a QKD system incorporating a recently proposed qubit-based distributed frame synchronization method, deployed over a metropolitan fiber network in Nanning, China. Using the polarization-encoded one-decoy-state BB84 protocol and the recently proposed qubit-based distributed frame synchronization method, our system achieves synchronization directly from the quantum signal, eliminating the need for dedicated synchronization hardware. Furthermore, to counteract dynamic polarization disturbances in urban fibers, the system integrates qubit-based polarization feedback control, enabling real-time polarization compensation through an automated polarization controller using data recovered from the qubit-based synchronization signals. During 12 hours of continuous operation, the system maintained a low average quantum bit error rate of 1.12 ± 0.48%, achieving a secure key rate of 26.6 kbit/s under 18 dB channel loss. Even under a high channel loss of 40 dB, a finite-key secure rate of 115 bit/s was achieved. This study represents a successful long-term validation of a frame-synchronization-based QKD scheme in a real urban environment, demonstrating exceptional stability and high-loss tolerance, and offering an alternative for building practical, scalable, and cost-efficient quantum-secure communication networks.
Due to the fast-paced advancements of the quantum computing field, current public key cryptographic protocols need to be rethought. One promising solution is Quantum Key Distribution (QKD), whose security is robust to any computational advancement. The security of QKD relies on the laws of quantum mechanics, ensuring that any eavesdropper attempting to access the data will be detected. In particular, polarization-encoding QKD systems allow to generate secret keys in two remote locations to encode/decode information, using the State of Polarization (SOP) of single photons. Although its security has been theoretically proven, its practical implementation poses some challenges, part of which are the main focus of this PhD thesis. One relevant process in QKD systems is the synchronization between the transmitter and receiver, namely, the frame synchronization. This way, in this thesis, a frame synchronization method is developed and implemented, showing its potential for the use in prepare-and-measure QKD systems. The developed method has been shown to be effective, even with a low number of photons reaching the receiver. Furthermore, its architecture allows it to be adjusted for different attenuation regimes of the QKD system. The ability to encode data on the physical properties of single photons, in this case, polarization, highly depends on the capacity to accurately generate the required polarization states on demand. This way, an automatic SOP generation method, comprising an optical polarization monitoring system and a dedicated algorithm was developed and implemented, capable of generating four SOPs. This method reached an average Quantum Bit Error Rate (QBER) of 0.75%, which is well below the security threshold. After the SOP generation, and their transmission through the quantum channel, polarization alignment algorithms are required to compensate for the random rotations induced by birefringence in the optical fiber. In this thesis, a non-iterative polarization compensation method was implemented. This method requires only three QBER estimations to re-align the polarization, reaching average QBERs of 1.8%. Additionally, multiple iterative methods were implemented for comparison purposes, with the results clearly showing a better efficiency of the deterministic method. Beyond fiber-based transmissions, free-space transmissions were analysed due to their ability to reach sites without installed fiber and due to its potential for satellite-based quantum communications. This thesis demonstrates the feasibility of polarization-encoding QKD over free-space channels, by subjecting quantum signals to atmospheric turbulence to study its impact. In that sense, polarization variations over a 1.8 km outdoor free-space channel were monitored, to understand the effect of atmospheric turbulence on polarization. These results have shown that SOP variations in free-space links are slow, allowing their compensation. Furthermore, it was identified that, under conditions tested, the Secret Key Rate (SKR) could reach values up to 8.7×10ˉ⁴ bits per second, allowing QKD over free space for distances up to 2.31 km.