Quantum key distribution (QKD) is a cryptographic technique that uses quantum mechanical principles to enable secure key distribution, offering information-theoretic security guaranteed by physical laws. Practical deployment of QKD requires robust, cost-effective systems that can operate in challenging field environments. A major challenge is achieving reliable clock synchronization without adding hardware complexity. Conventional approaches often use separate classical light signals, which increase costs and introduce noise that degrades quantum channel performance. To address this limitation, we demonstrate a QKD system incorporating a recently proposed qubit-based distributed frame synchronization method, deployed over a metropolitan fiber network in Nanning, China. Using the polarization-encoded one-decoy-state BB84 protocol and the recently proposed qubit-based distributed frame synchronization method, our system achieves synchronization directly from the quantum signal, eliminating the need for dedicated synchronization hardware. Furthermore, to counteract dynamic polarization disturbances in urban fibers, the system integrates qubit-based polarization feedback control, enabling real-time polarization compensation through an automated polarization controller using data recovered from the qubit-based synchronization signals. During 12 hours of continuous operation, the system maintained a low average quantum bit error rate of 1.12 ± 0.48%, achieving a secure key rate of 26.6 kbit/s under 18 dB channel loss. Even under a high channel loss of 40 dB, a finite-key secure rate of 115 bit/s was achieved. This study represents a successful long-term validation of a frame-synchronization-based QKD scheme in a real urban environment, demonstrating exceptional stability and high-loss tolerance, and offering an alternative for building practical, scalable, and cost-efficient quantum-secure communication networks.
Quantum key distribution (QKD) is a cryptographic technique that uses quantum mechanical principles to enable secure key distribution, offering information-theoretic security guaranteed by physical laws. Practical deployment of QKD requires robust, cost-effective systems that can operate in challenging field environments. A major challenge is achieving reliable clock synchronization without adding hardware complexity. Conventional approaches often use separate classical light signals, which increase costs and introduce noise that degrades quantum channel performance. To address this limitation, we demonstrate a QKD system incorporating a recently proposed qubit-based distributed frame synchronization method, deployed over a metropolitan fiber network in Nanning, China. Using the polarization-encoded one-decoy-state BB84 protocol and the recently proposed qubit-based distributed frame synchronization method, our system achieves synchronization directly from the quantum signal, eliminating the need for dedicated synchronization hardware. Furthermore, to counteract dynamic polarization disturbances in urban fibers, the system integrates qubit-based polarization feedback control, enabling real-time polarization compensation through an automated polarization controller using data recovered from the qubit-based synchronization signals. During 12 hours of continuous operation, the system maintained a low average quantum bit error rate of 1.12 ± 0.48%, achieving a secure key rate of 26.6 kbit/s under 18 dB channel loss. Even under a high channel loss of 40 dB, a finite-key secure rate of 115 bit/s was achieved. This study represents a successful long-term validation of a frame-synchronization-based QKD scheme in a real urban environment, demonstrating exceptional stability and high-loss tolerance, and offering an alternative for building practical, scalable, and cost-efficient quantum-secure communication networks.
Field trials are of key importance for novel technologies seeking commercialization and widespread adoption. This is also the case for quantum key distribution (QKD), which allows distant parties to distill a secret key with unconditional security. Typically, QKD demonstrations over urban infrastructures require complex stabilization and synchronization systems to maintain a low quantum bit error and high secret key rates over time. Here we present a field trial that exploits low-complexity self-stabilized hardware and a novel synchronization technique, to perform QKD over optical fibers deployed in the city center of Padua, Italy. Two techniques recently introduced by our research group are evaluated in a real-world environment: the iPOGNAC polarization encoder was used for preparation of the quantum states, while temporal synchronization was performed with the Qubit4Sync algorithm. The results here presented demonstrate the validity and robustness of our resource-effective QKD system, which can be easily and rapidly installed in an existing telecommunication infrastructure, thus representing an important step towards mature, efficient, and low-cost QKD systems.
Quantum key distribution (QKD) relies on quantum communication to allow distant parties to share a secure cryptographic key. Widespread adoption of QKD in current telecommunication networks will require the development of simple, low-cost, and stable systems. However, current QKD implementations usually include additional hardware that perform auxiliary tasks such as temporal synchronization and polarization basis tracking. Here we present a polarization-based QKD system operating at 1550 nm that performs synchronization and polarization compensation by exploiting only the hardware already needed for the quantum communication task. Polarization encoding is performed by a self-compensating Sagnac loop modulator that exhibits high temporal stability and the lowest intrinsic quantum bit error rate reported so far. The QKD system was tested over a fiber-optic link, demonstrating tolerance up to about 40 dB of channel losses. Due to its reduced hardware requirements and the quality of the source, this work represents an important step towards technologically mature QKD systems.
Quantum key distribution (QKD) leverages the principles of quantum mechanics to exchange a secret key between two parties. Despite its promising features, QKD also faces several practical challenges such as transmission loss, noise in quantum channels and finite key size effects. Addressing these issues is crucial for the large-scale deployment of QKD in fiber and satellite networks.
In this paper, we present a 1550 nm QKD system realizing the efficient-BB84 protocol and based on the iPOGNAC scheme. The system achieved repetition rates up to 1.5~GHz and showed an intrinsic QBER of ∼0.4%. The system was first tested on a laboratory fiber link and then on an intermodal link in the field, consisting of both deployed fiber and a 620 m free-space channel. The experiment was performed in daylight conditions, exploiting the Qubit4Sync synchronization protocol. With this trial, we achieved a new benchmark for free-space BB84 QKD systems by generating a sustained secret key rate (SKR) above 1~Mb/s for 1 hour. Finally, exploiting a recently discovered finite-size bound, we achieved a secure key rate of about 10 Mb/s at low losses (5 dB), and around 6.5~kb/s in the high-loss (38.5 dB), low block length (N=104) regime. The latter results demonstrate the system's suitability for highly lossy and time-constrained scenarios such as QKD from low Earth orbit satellites.
A global quantum secure network (QSN) based on quantum key distribution (QKD) has emerged as a significant trend since it provides an unconditionally secure way to defeat the threat posed by quantum computers. The nodes, based on ground or mobile platforms, are connected with two different channels, free-space and fiber. In this paper, a qubit-based synchronization reference-frame-independent (RFI) QKD is demonstrated in the field with a free-space/fiber integrated channel, in which the bright classical reference-frame calibration and clock synchronization signals are removed, and the quantum state is directly converted between two different channels without extra coding/decoding operations. It not only reduces the complexity of QKD and QSN but also enhances the practical security (e.g., removing calibration attacks and trusted repeaters). A key rate of 799.2 bps is achieved under 7 km urban free-space and 75 km fiber link. And the long time tests of a continuous 12 h without human intervention also demonstrate the stability of our system under such an integrated channel. Thus, we believe this work opens a way to implement a simple, flexible, and low-cost QSN.
Due to the fast-paced advancements of the quantum computing field, current public key cryptographic protocols need to be rethought. One promising solution is Quantum Key Distribution (QKD), whose security is robust to any computational advancement. The security of QKD relies on the laws of quantum mechanics, ensuring that any eavesdropper attempting to access the data will be detected. In particular, polarization-encoding QKD systems allow to generate secret keys in two remote locations to encode/decode information, using the State of Polarization (SOP) of single photons. Although its security has been theoretically proven, its practical implementation poses some challenges, part of which are the main focus of this PhD thesis. One relevant process in QKD systems is the synchronization between the transmitter and receiver, namely, the frame synchronization. This way, in this thesis, a frame synchronization method is developed and implemented, showing its potential for the use in prepare-and-measure QKD systems. The developed method has been shown to be effective, even with a low number of photons reaching the receiver. Furthermore, its architecture allows it to be adjusted for different attenuation regimes of the QKD system. The ability to encode data on the physical properties of single photons, in this case, polarization, highly depends on the capacity to accurately generate the required polarization states on demand. This way, an automatic SOP generation method, comprising an optical polarization monitoring system and a dedicated algorithm was developed and implemented, capable of generating four SOPs. This method reached an average Quantum Bit Error Rate (QBER) of 0.75%, which is well below the security threshold. After the SOP generation, and their transmission through the quantum channel, polarization alignment algorithms are required to compensate for the random rotations induced by birefringence in the optical fiber. In this thesis, a non-iterative polarization compensation method was implemented. This method requires only three QBER estimations to re-align the polarization, reaching average QBERs of 1.8%. Additionally, multiple iterative methods were implemented for comparison purposes, with the results clearly showing a better efficiency of the deterministic method. Beyond fiber-based transmissions, free-space transmissions were analysed due to their ability to reach sites without installed fiber and due to its potential for satellite-based quantum communications. This thesis demonstrates the feasibility of polarization-encoding QKD over free-space channels, by subjecting quantum signals to atmospheric turbulence to study its impact. In that sense, polarization variations over a 1.8 km outdoor free-space channel were monitored, to understand the effect of atmospheric turbulence on polarization. These results have shown that SOP variations in free-space links are slow, allowing their compensation. Furthermore, it was identified that, under conditions tested, the Secret Key Rate (SKR) could reach values up to 8.7×10ˉ⁴ bits per second, allowing QKD over free space for distances up to 2.31 km.
Abstract We present the design and implementation of a state-of-polarization (SOP) management technique and two efficient synchronizing methods for quantum key distribution (QKD) systems. This is achieved following a wavelength-division multiplexing approach, where the classical synchronization signal and the quantum states are propagated in the same optical fiber. The employed frame synchronization method is based on the monitoring of the quantum bit error ratio (QBER) of the quantum channel, thus avoiding additional hardware and high computational resources. We evaluate the operation of SOP generation method through the assessment of the individual response of the waveplates that comprise the employed electronic polarization controller. Finally, the performance was assessed by computing the overall QBER and the QBER contributions of each of the four polarization states associated with the different qubits. The measurements, obtained during six hours, show a slight variation of the QBER values associated with the individual contributions, reaching an overall QBER of 0.75%. This demonstrates the capability of the presented methods to operate, stably, with very low QBER values, making its application in practical QKD systems reliable.