In the current era of Noisy Intermediate-Scale Quantum (NISQ) technology, the practical use of quantum computers remains inhibited by our inability to aptly decouple qubits from their environment to mitigate computational errors. In this paper, we introduce an approach by which knowledge of a qubit's initial quantum state and the standard parameters describing its decoherence can be leveraged to mitigate the noise present during the execution of a single-qubit gate. We benchmark our protocol using cloud-based access to IBM quantum processors. On ibmq_rome, we demonstrate a reduction of the single-qubit error rate by 38%, from [Formula: see text] to [Formula: see text], provided the initial state of the input qubit is known. On ibmq_bogota, we prove that our protocol will never decrease gate fidelity, provided the system's [Formula: see text] and [Formula: see text] times have not drifted above 100 times their assumed values. The protocol can be used to reduce quantum state preparation errors, as well as to improve the fidelity of quantum circuits for which some knowledge of the qubits' intermediate states can be inferred. This paper presents a pathway to using information about noise levels and quantum state distributions to significantly reduce error rates associated with quantum gates via optimized decomposition into native hardware gates.
In the current era of Noisy Intermediate-Scale Quantum (NISQ) technology, the practical use of quantum computers remains inhibited by our inability to aptly decouple qubits from their environment to mitigate computational errors. In this paper, we introduce an approach by which knowledge of a qubit's initial quantum state and the standard parameters describing its decoherence can be leveraged to mitigate the noise present during the execution of a single-qubit gate. We benchmark our protocol using cloud-based access to IBM quantum processors. On ibmq_rome, we demonstrate a reduction of the single-qubit error rate by 38%, from [Formula: see text] to [Formula: see text], provided the initial state of the input qubit is known. On ibmq_bogota, we prove that our protocol will never decrease gate fidelity, provided the system's [Formula: see text] and [Formula: see text] times have not drifted above 100 times their assumed values. The protocol can be used to reduce quantum state preparation errors, as well as to improve the fidelity of quantum circuits for which some knowledge of the qubits' intermediate states can be inferred. This paper presents a pathway to using information about noise levels and quantum state distributions to significantly reduce error rates associated with quantum gates via optimized decomposition into native hardware gates.
In the current era of Noisy Intermediate-Scale Quantum (NISQ) technology, the practical use of quantum computers remains inhibited by our inability to aptly decouple qubits from their environment to mitigate computational errors. In this work, we introduce an approach by which knowledge of a qubit's initial quantum state and the standard parameters describing its decoherence can be leveraged to mitigate the noise present during the execution of a single-qubit gate. We benchmark our protocol using cloud-based access to IBM quantum processors. On ibmq_rome, we demonstrate a reduction of the single-qubit error rate by 38%, from 1.6×10−3 to 1.0×10−3, provided the initial state of the input qubit is known. On ibmq_bogota, we prove that our protocol will never decrease gate fidelity, provided the system's T1 and T2 times have not drifted above 100 times their assumed values. The protocol can be used to reduce quantum state preparation errors, as well as to improve the fidelity of quantum circuits for which some knowledge of the qubits' intermediate states can be inferred. This work presents a pathway to using information about noise levels and quantum state distributions to significantly reduce error rates associated with quantum gates via optimized decomposition into native gates.
Abstract Quantum computing has recently emerged as a novel paradigm for solving problems otherwise intractable on classical computers, yet the practical progress of quantum computers is severely impacted by noise, decoherence, and imperfect gate operations in Noisy Intermediate-Scale Quantum (NISQ) devices. Specific to IBM Quantum hardware, imperfections due to readout error, gate errors, and device drift, which depends on time, resolves limits for the accuracy of outputs from our algorithms. The mitigation strategies currently used, for example, Measurement Error Mitigation (MEM), Zero Noise Extrapolation (ZNE), and Clifford Data Regression (CDR), offer improvement over raw, unmitigated outputs, but they are static and not dynamic; the reduction of noise in within an NISQ device is temporal and can vary in patterns that are non-zero. In addition to this, using the conventional methods provides inconsistent and suboptimal results.This study will provide enhanced reliability with respect to performing quantum computation on IBM Quantum hardware with a unique mitigation framework that is adaptive and computationally efficient for a high-fidelity output. The problem taken on here is the failure of existing error mitigation strategies to provide adaptive noise compensation, as they assume a statically-distributed error, despite the performance-related characteristics already being documented in regards to calibration drift and variation over time.To achieve this, we propose a Hybrid Adaptive Error Mitigation (HAEM) approach that includes baseline measurement error mitigation and an additional correction layer that utilizes realtime calibration information, along with lightweight machine learning models. The approach can be broken down into three steps: (i) perform standard measurement error mitigation to reduce classical readout noise, (ii) execute compact calibration circuits, such as Bell states, GHZ states and Clifford benchmarks to capture then current error profile of the device, and (iii) use a lightweight machine learning model (having been trained on historical and newest calibration data) to dynamically change the mitigation weights applied for the target quantum algorithm. All implementation is done using Qiskit Runtime to ensure low-latency execution, and we completed experiments on both Qiskit Aer noisy simulators and IBM Quantum devices.Initial results suggest HAEM improved the outputs of quantum algorithms' fidelity compared to the unmitigated runs and the baseline measurement error mitigation (MEM) runs. On the noisy simulators, HAEM increased fidelity from a raw performance of 0.65 to 0.87, nearly a 34% improvement. In fairer hardware-like scenarios, fidelity-on-average was persistently 12% better than MEM, with nearly equal time duration for the additional adaptive measurements. The adaptive aspect of HAEM consistently supported subsequent calibration cycles of the device and was effective to continue providing fidelity improvements despite the static mitigation performance degrading.To sum up, the proposed HAEM framework is a modern and viable alternative for error mitigation which brings together the benefits of baseline approaches with corrections that are driven by fixed-function error-corrective, adaptive learning. As both learning-based and standard baseline approaches can only achieve fixed levels of performance, HAEM, through its use of noise mitigation both at execution time and through correlating it with standard data, provides a route towards reliable quantum computations on current IBM hardware. HAEM also presents a contribution to the NISQ error-resilient landscape, and however it is intended that it will continue to improve future applications of hybrid workflows of quantum and classical computation where error mitigation and resilience is important.
Quantum devices in the noisy intermediate-scale quantum (NISQ) era are highly susceptible to different types of quantum noise, which directly impact the reliability of experimental results. This work provides a characterization of error behavior arising from quantum noises on IBM's superconducting quantum processor, offering practical insights for algorithm design, benchmarking, and error-mitigation strategies on a real superconducting quantum processor in the NISQ era. The study begins with the measurement of the basis state, without applying any gate, to quantify state-preparation and measurement (SPAM) errors. Additionally, the errors are further quantified due to the application of single-qubit Pauli-X, two-qubit CNOT gate and other multi-qubit Controlled-X gates. Each circuit was executed with 1024 shots, and the percentage error between the expected and observed outputs was computed. The results show that the single-qubit Pauli-X gate exhibits relatively low errors in comparison with the two-qubit CNOT gate, whereas other multi-qubit Controlled-X gates lead to significantly higher deviations. This work also analyzes the noise effect of a fourqubit Controlled-X gate being implemented using a three-qubit Controlled-X gate with an extra auxiliary qubit, and the result shows a significant reduction in the error rate.
Current noisy quantum computers have multiple types of errors, which can occur in the state preparation, measurement/readout, and gate operation, as well as intrinsic decoherence and relaxation. Partly motivated by the booming of intermediate-scale quantum processors, measurement and gate errors have been recently extensively studied, and several methods of mitigating them have been proposed and formulated in software packages (e.g., in IBM Qiskit). Despite this, the state preparation error and the procedure to quantify it have not yet been standardized, as state preparation and measurement errors are usually considered not directly separable. Inspired by a recent work of Laflamme, Lin, and Mor \cite{laflamme2022algorithmic}, we propose a simple and resource-efficient approach to quantify separately the state preparation and readout error rates. With these two errors separately quantified, we also propose methods to mitigate them separately, especially mitigating state preparation errors with linear (with the number of qubits) complexity. As a result of the separate mitigation, we show that the fidelity of the outcome can be improved by an order of magnitude compared to the standard measurement error mitigation scheme. We also show that the quantification and mitigation scheme is resilient against gate noise and can be immediately applied to current noisy quantum computers. To demonstrate this, we present results from cloud experiments on IBM's superconducting quantum computers. The results indicate that the state preparation error rate is also an important metric for qubit metrology that can be efficiently obtained.
Noisy Intermediate-Scale Quantum (NISQ) devices are promising platforms for practical quantum computing, but their performance is significantly affected by limited qubit availability, gate errors, decoherence, circuit depth, and hardware-dependent noise. Conventional quantum circuits are generally designed and optimized before execution and may not respond effectively to changing hardware conditions during computation. This research proposes a Self-Adaptive Quantum Circuit framework that dynamically modifies quantum circuits according to the current computational resources and noise characteristics of NISQ devices. The proposed framework monitors parameters such as qubit fidelity, gate error rates, circuit depth, execution time, and resource availability, and automatically selects suitable circuit configurations to improve computational performance. Adaptive mechanisms can be employed to reduce unnecessary gates, optimize qubit utilization, and mitigate the impact of hardware noise while maintaining the required computational accuracy. The framework will be evaluated using simulation platforms and available NISQ quantum hardware, comparing adaptive circuits with conventional static circuits using metrics such as accuracy, fidelity, circuit depth, gate count, execution time, and error rate. The expected outcome is a resource-efficient and noise-aware quantum circuit optimization approach capable of improving the reliability and performance of quantum applications on near-term quantum hardware. The proposed research aims to contribute toward more practical, flexible, and hardware-aware quantum computing systems for NISQ-era applications. Keywords: NISQ Computing, Self-Adaptive Quantum Circuits, Quantum Circuit Optimization, Quantum Error Mitigation, Quantum Noise, Quantum Computing.
Abstract High error-rates preclude the preparation of fully error-corrected logical qubit state on noisy intermediate scale quantum (NISQ) computers. When operand logical qubits inherit large state-preparation noise, it is difficult to show that subsequent logical gate fails less frequently than its physical (unprotected) version. We articulate a scheme of decoupling transversal logical gate errors from state-preparation noise and experimentally validate its use-case for IBM Q quantum processors. We find that in the absence of state preparation noise, the IBM Q processors significantly raise the likelihood of certain two-qubit errors in the operand(s) of [[7, 1, 3]] transversal gates. Yet, encoding can still be shown to improve the gate fidelity provided that the gate operands are strategically decoded/corrected for the likely two-qubit errors in lieu of their less likely single-qubit counterparts. This trade-off enables quantum CSS code to principally correct longer strings of errors without increasing the codeword size and paves new avenues of investigating fault-tolerance in NISQ computers.