We propose a floating tunable coupler that does not rely on direct qubit-qubit coupling capacitances to achieve the zero-coupling condition. We show that the polarity of the qubit-coupler couplings can be engineered to offset the otherwise constant qubit-qubit coupling and attain the zero-coupling condition when the coupler frequency is above or below the qubit frequencies. We experimentally demonstrate these two operating regimes of the tunable coupler by implementing symmetric and asymmetric configurations of the superconducting pads of the coupler with respect to the qubits. Such a floating tunable coupler provides flexibility in designing large-scale quantum processors while reducing the always-on residual couplings.
We propose a floating tunable coupler that does not rely on direct qubit-qubit coupling capacitances to achieve the zero-coupling condition. We show that the polarity of the qubit-coupler couplings can be engineered to offset the otherwise constant qubit-qubit coupling and attain the zero-coupling condition when the coupler frequency is above or below the qubit frequencies. We experimentally demonstrate these two operating regimes of the tunable coupler by implementing symmetric and asymmetric configurations of the superconducting pads of the coupler with respect to the qubits. Such a floating tunable coupler provides flexibility in designing large-scale quantum processors while reducing the always-on residual couplings.
Tunable coupling of superconducting qubits has been widely studied due to its importance for isolated gate operations in scalable quantum processor architectures.Here, we demonstrate a tunable qubit-qubit coupler based on a floating transmon device, which allows us to place qubits at least 2 mm apart from each other while maintaining over 50-MHz coupling between the coupler and the qubits.In the introduced tunable-coupler design, both the qubit-qubit and the qubit-coupler couplings are mediated by two waveguides instead of relying on direct capacitive couplings between the components, reducing the impact of the qubit-qubit distance on the couplings.This leaves space for each qubit to have an individual readout resonator and a Purcell filter, which is needed for fast high-fidelity readout.In addition, simulations show that the large qubit-qubit distance significantly lowers unwanted non-nearest-neighbor coupling and allows multiple control lines to cross over the structure with minimal crosstalk.Using the proposed flexible and scalable architecture, we demonstrate a controlled-Z gate with (99.81 ± 0.02)% fidelity.
We have proposed and experimentally verified a tunable interqubit coupling scheme for large-scale integration of superconducting qubits. The key feature of the scheme is the insertion of connecting pads between the qubit and tunable coupling element. In such a way, the distance between two qubits can be increased considerably to a few millimeters, leaving enough space for arranging control lines, readout resonators, and other necessary structures. The increased interqubit distance provides more wiring space for the flip-chip process and reduces crosstalk between qubits and from control lines to qubits. We use the term tunable coupler with capacitively connecting pad (TCCP) to name the tunable coupling part that consists of a transmon coupler and capacitively connecting pads. With the different placement of connecting pads, different TCCP architectures can be realized. We have designed and fabricated a few multiqubit devices in which TCCP is used for coupling. The measured results show that the performance of the qubits coupled by TCCP, such as T1 and T2, was similar to that of traditional transmon qubits without TCCP. Meanwhile, our TCCP also exhibited a wide tunable range of the effective coupling strength and a low residual ZZ interaction between the qubits by properly tuning parameters on the design. Finally, we successfully implemented an adiabatic controlled-Z gate with TCCP. Furthermore, by introducing TCCP, we also discuss the realization of the flip-chip process and tunable coupling qubits between different chips.
We use a floating tunable coupler to mediate interactions between qubits on separate chips to build a modular architecture. We demonstrate three different designs of multichip tunable couplers using vacuum-gap capacitors or superconducting indium-bump bonds to connect the coupler to a microwave line on a common substrate and then connect to the qubit on the next chip. We show that the zero-coupling condition between qubits on separate chips can be achieved in each design and that the relaxation rates for the coupler and qubits are not noticeably affected by the extra circuit elements. Finally, we demonstrate two-qubit gate operations with fidelity at the same level as qubits with a tunable coupler on a single chip. Using one or more indium bonds does not degrade qubit coherence or impact the performance of two-qubit gates.
Tunable couplers have enabled two-qubit gate fidelities in superconducting quantum processors to approach 99.9%, yet simultaneously suppressing residual interactions and maintaining flexible qubit-frequency allocation remain central challenges for scaling. Here, we propose a double-resonator coupler (DRC) consisting of two resonators interconnected by a single Josephson junction and a capacitor. The hybridized resonator modes provide two mediated exchange paths whose interference controls the qubit-qubit interaction. The DRC enables complete cancellation of residual ZZ interaction for qubit-qubit detunings well outside the straddling regime, even in the absence of direct qubit-qubit coupling, thereby relaxing constraints on frequency allocation and qubit placement. Away from the idle point, the same circuit provides a strong ZZ interaction of approximately 70MHz, enabling a 20ns controlled-Z gate with simulated coherent infidelity below 10−5. These results establish the DRC as a flexible single-junction coupler architecture for high-fidelity superconducting quantum processors.
Unlocking a fast adiabatic CZ gate and exact residual ZZ cancellation between fixed-frequency transmons using a floating tunable coupler
Tunable couplers in superconducting qubit architectures enable strong qubit-qubit interactions for two-qubit gates while suppressing unwanted coupling during single-qubit operations. However, achieving low error rates for fast two-qubit gates remains challenging, as suppressing leakage and non-adiabatic errors typically requires specialized qubit, coupler, or pulse designs, often at the expense of an idling ZZ=0 condition. In this work, we demonstrate that a symmetric floating tunable coupler provides a natural platform for fast, high-fidelity adiabatic controlled-Z (CZ) gates. Its favorable energy-level structure eliminates the conventional trade-off between rapid conditional-phase accumulation and adiabatic evolution while preserving exact cancellation of residual ZZ interaction at idling. This architecture exhibits intrinsic robustness to non-adiabatic transitions, even under simple flux modulation waveforms. To push performance at short gate durations, where maintaining adiabaticity becomes more challenging despite the favorable level structure, we introduce pulse-shaping techniques based on the instantaneous adiabatic factor that further suppress non-adiabatic errors. We experimentally realize a 24 ns adiabatic CZ gate with fidelity exceeding 99.9% and stable operation over several hours.
A major challenge in the field of quantum computing is the construction of scalable qubit coupling architectures. Here, we demonstrate a novel tunable coupling circuit that allows superconducting qubits to be coupled over long distances. We show that the interqubit coupling strength can be arbitrarily tuned over nanosecond time scales within a sequence that mimics actual use in an algorithm. The coupler has a measured on/off ratio of 1000. The design is self-contained and physically separate from the qubits, allowing the coupler to be used as a module to connect a variety of elements such as qubits, resonators, amplifiers, and readout circuitry over distances much larger than nearest-neighbor. Such design flexibility is likely to be useful for a scalable quantum computer.